ReviewsKohler Kelston Drop In Sink

2PCS Kitchen Sink Stopper - Stainless Steel Large Wide Rim 3.35 Diameter - Fengbao

NO TOOLS NEEDED, Easy To Replace that Old, Damaged or Misplaced Splash Guard to Keep the Food & Debris From Splashing Up.
BEST VALUE Replacement Brushed Sink Stopper for ANY Standard Kitchen Sink Drain, Fits In Place of Insinkerator QCB-AM Baffle Splash Guard and Stopper.
MEASUREMENTS: The Widest Diameter including the rubber is 3.35". The Rubber Slightly Compresses When You Put It In The Sink To Create a Tight Seal.
HOLD WATER IN YOUR SINK & Help Keep Your Silverware and Unwanted Items from Going Down the Drain Yet While Allowing Food to Necessarily Go Into Your....
FITS ALL STANDARD SINKS and Disposal by Kohler, Moen and Garbage Disposals By Insinkerator, Waste King, Sinkmaster, Whirlaway & Many Others.

Check Stock

Kitchen Sink Flange, Stainless Steel Flange For Insinkerator Garbage Disposals And Other Disposers That Use A 3 Bolt Mount By Essential Values

BEST VALUE - Our Stainless Steel Sink Flange Is Cost Effective Without Compromising Quality.
FOR GARBAGE DISPOSALS - For Use With Insinkerator Or Other 3-Bolt Style Disposal Mounts On Standard Size Sink Depths..
USE - A Great Kitchen Sink Flange To Replace Your Grimey Flange On A New or Existing Sink, Or For Swapping Out The Decor Of Your Existing Sink Flange.
Measures 4.5" Wide X 1.5", Compare To Kohler, Insinkerator, Delta Branded Flanges. Works With A Sink Stopper (Not Included).
EASY TO INSTALL - Plumbers Puttyy Is Required To Make A Tight Seal Between The Top Of The Sink And The Flange.

Check Stock

33 Kitchen Sink Drop In - Fulorni 33\x22\ Drop In Kitchen Sink Ledge Workstation 16 Gauge Stainless Steel Single Bowl Topmount Kitchen Sink Basin With Cutting Board Basket Strainer

〓 TRUSTWORTHY QUALITY ––Fulorni 33 inch drop in kitchen sink is made of premium heavy-duty 16-Gauge SUS304 stainless steel, which is extreme resistant to dents and scratches, corrosion resistant, easy to clean..
〓 STANDARD DROP SINK SIZE ––Exterior Dimensions: 33" (wide) x 22" (front-to-back) x 10" (top rim to drain bottom) | Cutout Size: 32.2"x21.2" for reference | Minimum cabinet size: 36" | Standard 3.5" drain opening fits most garbage disposal unit | Reserved holes for soap dispenser or water purifier faucet. Easy to install topmount kitchen sink drop in. Please make sure it fits your kitchen countertop before purchasing..
〓 WORKSTATION SINK DESIGH––33" drop kitchen sink is designed with single tier for spacious workspace. Overhanging ledge on the front and back act as a track for the kitchen sink accessories to slide, including acacia solid wood cutting board, stainless colander and roll up drying rack that slide flexibly on the ledges, providing more space to use freely and converting the drop in sink into a multifunctional workstation..
〓 NOISE-DEFEND/ANTI-CONDENSATION––Heavy-duty undercoating paint around and 3mm thick rubber pads minimize noise, effectively eliminating the echo of sharp running water or falling dish....

Check Stock

KOHLER K-5863-4-0 Cape Dory Self-Rimming Kitchen Sink, White

Offers functional alternative to the traditional double-basin kitchen sink.

Check Stock

Renovators Supply Manufacturing Luke 24' Drop-in Self-Rimming Rectangular Bathroom Sink in White with Overflow

MATERIAL - Our White Luke Drop-in Self Rimming bathroom sink is built using heavy-duty Grade A Vitreous China and coated with glossy porcelain to give a sleek glazed look to your modern home, making it glide right in with your style. The exclusive coating makes it scratch and stain resistant, adding to its longevity and durability..
DIMENSION - This rectangle shaped Drop -in sink measures 24 inches in width and 18.3 inches in Projection. The inner basin bowl is 5.5 In. Deep, 16.5 In. Wide and 10.81 in. projected. The unique extended countertop Rim act as a small additional storage space - Pretty and Practical Porcelain Sinks!.
DURABLE AND WELL BUILT- It features a concealed round overflow to avoid water damage. This self rimming drop-in bathroom sink includes a pre-drilled single hole measuring 1.5 In. dia towards the middle section for Faucet. (Faucet Sold Separately). Holds a 1.75 inch drain..
EASY DROP-IN INSTALLATION - This sink is designed in a way that the rims are on top of the countertop. It involves an easy drop-in installation where the sink is placed directly into the hole and then secured and sealed on the top of the countertop..
BUY WITH CONFIDENCE- The porcelain-gloss coated heavy-duty Drop-In Sink is designed to meet the needs of mode....

Check Stock

Kitchen Extended Sink Flange Deep Polished Stainless Steel Flange for Insinkerator Garbage Disposals and Other Disposers That Use A 3 Bolt Mount and A Thicker Sink by Essential Values

BEST VALUE - Our Polished Stainless Steel Extended / Deep Sink Flange Is Cost Effective Without Compromising Quality.
FOR GARBAGE DISPOSALS - For Use With Insinkerator Or Other 3-Bolt Style Disposal Mounts On Thicker Size Sink Depths..
USE - A Great Kitchen Sink Flange To Replace Your Grimey Flange On A New or Existing Sink, Or For Swapping Out The Decor Of Your Existing Sink Flange.
Measures 4.5" Wide X 2.5" Deep, Compare To Kohler, Insinkerator, Delta, Nantucket, Everflow Branded Flanges. Works With Sink Stoppers (Not Included).
EASY TO INSTALL - Plumbers Putty Is Required To Make A Tight Seal Between The Top Of The Sink And The Flange.

Check Stock

Sunmeyke Sponge Holder for Kitchen Sink 2 Packs Never Rust Silver SUS304 Stainless Steel Self Adhesive Sponge Holder Rustproof & Waterproof Minimal Size Save Sink Space Quick Drying

Texture of Material: This drop in kitchen sink is made of premium T-304 stainless steel 16 G construction and brushed nicked finished for corrosion,....
Drop In Workstation Sink: Kitchen sink drop in workstation with steps which overhanging lips on the front and back as a track for sliding the built-in....
Humanized Design: This stainless steel kitchen sink is ultra quiet with thicker & softer Rubber Noise Reduction Pads. Anti-condensation Thickening....
What You Will Get: Stainless drop in kitchen sink, 1xpc Multi-functional dish grid with rubber feet to prevent scratching, 1xpc deep drain basket....
Sink Dimension:Exterior Dimensions: 33"L x 22"W x 10"D, Interior Dimensions: 31"L x 18"W x 10"D. Standard 3-1/2" Drain Opening That Fits the Most....

Check Stock

APPASO Topmount Kitchen Sink 30x22 Drop In Workstation Kitchen Sink 30 inch Single bowl Kitchen Sink Stainless Steel 10” Deep 18 Gauge Ledge Kitchen Sink Handmade Top Mount

Ledge Kitchen Sink Dimension: 30" L x 22" W x 10" D.
Minimum cabinet size: 33”. Standard 3.5" drain openings....
Sturdy & Durable Kitchen Sink: Stainless steel kitchen sink with extra-thick TRU18 real 18-Gauge (always 1.2mm thick) construction is for superior....
Rejecting Noise: 30 inch Kitchen sink drop in with thicker & softer rubber noise reduction pads can absorb noise and vibration when the sink is in....
Humanized Design: 5 efficient decontamination layers to protect your health, X-shape flow line to avoid clogging. 10 Inch extra deep double bowl....
Drop In Workstation Sink: Kitchen sink drop in workstation with ledges for sliding the built-in accessories convert your sink to a workspace. It can....

Check Stock

KOHLER K-5827-0 Whitehaven Farmhouse Self-Trimming Undermount Single-Bowl Sink with Tall Apron, White 9.63 x 21.56 x 32.69 inches

MINIMUM CABINET BASE: Fits minimum 33 in. cabinet. Self-Trimming designs requires simple rough cut.
INNOVATIVE DESIGN: Basin slopes 2 degrees toward drain to minimize water pooling.
MATERIAL: Made from KOHLER enameled cast iron that resists chipping, cracking or burning.
EASY TO lNSTALL: Self-Trimming apron overlaps the cabinet face for easy installation. Includes cutout templates..
SINK SIZING: 32 1/2" x 21 9/16" x 9 5/8".

Check Stock

33 Kitchen Sink Drop In - Fulorni 33"x22" Kitchen Sink Drop In Topmount 16 Gauge Stainless Steel Single Bowl Above Counter Kitchen Sink Basin

〓 TRUSTWORTHY QUALITY ––Made of premium heavy duty 16 Gauge SUS304 stainless steel, the thickest on the market, this 33" drop in stainless steel kitchen sink is extremely resistant to dents and scratches, corrosion resistant and long-lasting. Commercial grade brushed finish ensures the drop sink easy to clean and will not dull over time..
〓 STANDARD 33 INCH DROP SINK ––Exterior Dimensions: 33" (wide) x 22" (front-to-back) x 10" (top rim to drain bottom) | Interior bowl dimension: 31" W x17.8" D x 9.75" H | Cutout Size: 32.2"W x21.2"D | Minimum cabinet size: 36 Inch for reference | Standard 3.5" drain opening fits most garbage disposal unit | Reserved 2 holes for soap dispenser or water purifier faucet. Easy to install topmount kitchen sink drop in..
〓 NOISE-DEFEND/ANTI-CONDENSATION ––Heavy-duty acoustic enclosure primer and 3-mm thick rubber pads minimize noise and reduce condensation water, effectively eliminating the echo of sharp running water or falling dishes and making your home quieter. Special anti-condensation undercoating prevents moisture buildup and reduces the risk of condensation ....

Check Stock

Kohler 28002-1-CM1 K-28002-1-CM1 Kennon Kitchen Sink, 33 in, Matte Black

36-in minimum base cabinet width for under-mount or top-mount installation.
Includes one faucet hole on rear deck (three more faucet/accessory holes available for knockout).
K-80048 small sink rack also available (sold separately)..
KOHLER Neoroc composite is durable and built to withstand day-to-day cleaning tasks..
Matte finish offers rich, dimensional color..

Check Stock