ReviewsLab Oscilloscopes Handheld

Gamma Clarity 40 Hz Meditation Lamp

  • SCIENCE BACKED TECHNOLOGY - Clarity devices are designed based on the latest cutting edge science and clinical studies on 40Hz light.
  • PRECISION FLICKER CALIBRATION - Each Gamma Clarity device is calibrated and tested on industrial oscilloscopes to ensure precise frequency and maximum....
  • SAFELY PROMOTES BRAIN HEALTH - Current research shows that 40Hz flickering light induces healthy gamma rhythm in the brain.
  • PLUG & PLAY DESIGN - Everything is included to start enjoying the benefits of 40Hz Light Therapy immediately.
Check Stock

kuman P4100 Universal 100:1 High Voltage Probe for Oscilloscopes for Rigol Atten Owon Siglent

  • Usable with scopes having Bandwidth up to 100 MHz.
  • High sensitivity, excellent performance and reliable function.
Check Stock

PowerFresh 2-in-1 Lightweight Swivel Steam Mop; Naturally Sanitizes Hard Floors & Hard Surfaces with On-Demand Steam, 2814

  • Cleans & sanitizes* with the natural power of Steam. Uses water only to clean, remove tough, stuck on messes and eliminates 99.9% of germs and bacteria* on a variety of hard surfaces in your home. Safe to use around kids and pets.**.
  • Two Steam Cleaners in One. Works as a floor steam mop or a handheld steamer to clean above floor hard surfaces with the two included tools..
  • Eliminates 99.9% of Germs & Bacteria* on both hard floors and above floor hard surfaces. Includes two washable, reusable microfiber mop pads.
  • Powerful steam ready in just 30 seconds, plus steam-on-demand triggers to control the amount of steam you use while cleaning..
  • Low profile mop foot and swivel steering to easily maneuver under and around furniture and other obstacles. No wall mount needed, device conveniently stands on its own..
  • Removable Handle. Use in handheld mode for extended reach steam cleaning to clean high, low and hard-to-reach areas..
  • Removable water tank to easily fill and refill at the sink, no hassling around with measuring cups or spilling water.
  • *When using with the Microfiber mop pad on hard floors or in handheld mode without attachments as instructed. Tested under controlled laboratory conditions [in a 3rd party lab]. Results may vary..
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...he current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your AC/DC Current Probe. Auto zero at power on, relative zero correction .Low noise level, and high detection accuracy. 100% money back guarantee & 1YE....
Check Stock

AEMC MD305 AC Current Probe (Lead - 1mA/A-600A max) (#1201.36)

  • Large jaw opening accommodated conductors up to 250kcmil.
  • Designed for DMMs, loggers, recorders and oscilloscopes.
  • Applications: measuring in breaker panels, industrial loads, HVAC, residential and commercial sites, 5A secondary current transformers (CTs) monitoring, data logging/recording.
Check Stock

Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 100MHz,Usable with Scopes having Bandwidth up to 100 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

AEMC MN193-BK AC Current Probe for use with Power Quality Analyzers, 10' Lead

  • Large jaw opening accommodated conductors up to 250kcmil.
  • Designed for DMMs, loggers, recorders and oscilloscopes.
  • Applications: measuring in breaker panels, industrial loads, HVAC, residential and commercial sites, 5A secondary current transformers (CTs) monitoring, data logging/recording.
Check Stock

AEMC ALS-1 AC Line Splitter with Current Probe for Clamp-On Meters and Multimeters

  • Large jaw opening accommodates conductors up to two 500kcmil.
  • Improved ergonomic design and easy operation.
  • Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters.
Check Stock

SIGLENT SLA1016 16-channel Logic Analyzer Probe for SIGLENT SDS1000X-E Scopes

  • MSO function hardware for SDS2000X-E oscilloscope, 16-channel, 500 MSa/s, 14 Mpts.
  • MSO Hardware for SDS2000X-E and four channel SDS1000X-E oscilloscopes.
  • Oscilloscope will require an MSO software activation license (sold separately - please see accessories section).
  • Four-channel SDS1000X-E scopes require firmware version 6.1.20 or greater.
Check Stock

Hantek PP80B 2pcs Oscilloscope Scope Clip Probe 1x:10x Oscillograph Rapier 80MHz

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 200MHz,Usable with Scopes having Bandwidth up to 200 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Fluke I3000S Very High AC Current Clamp, 600V AC Voltage, 3000A AC Current

  • Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools.
  • Clamp-on AC current clamp for use with oscilloscopes and multimeters with banana input using the supplied dual banana to BNC adapter.
  • The clamp is optimized for measurement on power distribution systems.
Check Stock