ReviewsLada Strut Absorber

TRIL Gear 2PCS Rear Air Suspension Shock Absorber Strut Replacement for 02-14 Escalade & 07-13 Avalanche & 03-06 Avalanche 1500 & 00-14 Suburban 1500 Tahoe Yukon XL 1500

  • 【Fitment】: Replacement for 02-14 Escalade & 07-13 Avalanche & 03-06 Avalanche 1500 & 00-14 Suburban 1500/ Tahoe/ Yukon XL 1500.
  • 【Replace Air Shock NO#】: 25979394, 15756926, 15852159, 15869656, 15869658, 15918525, 15924688, AS-2127 , AS-2700 , AS-2708, AS-2715, 25979391,....
  • 【Package Includes】: 2 x Rear (Right & Left) Air Springs Suspension.
  • 【Easy & Safe Installation】: This is a complete strut assembly. The buckle holes are consistent with the original cars, so you can remove and....
  • 【Function】: Absorber is mainly used to suppress the shock and impact from the road after suction rebound.Suppress the rapid vibration of the....
Check Stock

Detroit Axle - Front Struts & Rear Shock Absorber w/ Sway Bar Links Replacement for Ford Crown Victoria Lincoln Town Car Mercury Grand Marquis [Excluding Police/Taxi Models] - 8pc Set

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Strut & Coil Spring Assembly, 2x Rear Shock Absorber Assembly, 2x Front Sway Bar End Links and 2x Rear Sway Bar End Links.
  • Piston seal adjusts as it wears to maintain a tight seal between the piston and pressure tube. This minimizes leak paths for a longer, more....
Check Stock

XCEL Super Versatile Rubber Pads with Strong Adhesive, Great Vibration Damping Pads, Perfect for Loud Washing Machines, Acoustic Foam Pad, Made in USA (3 Pack - 6\ x 6\ x 1/2\)

  • Premium Material: The shocks absorber is made of premium metal, copper, and rubber, you can use it for a long time. The air spring strut is designed to maintain vehicle height level even carrying an uneven load,can hold air pressure and eliminate sag caused by leaking air suspension..
  • Ideal Size: Cab shock, length: 20.7cm/8.1inch, Width: 11.9cm/4.7inch, Height: 59.5cm /23.4inch. The air suspension can compress the air in a elastic closed container so that it can work effectively. Professional assembly is highly recommended..
  • Standard Quality: Our Cab Air Shock is made to meet or even exceed the standard qulity. When added altitude controller in the air spring, the height of car can change with load.This air spring is constructed with high quality material, you can use it for a long time..
  • Great Performance: Cab Shock Air Bag Absorber. No squeaking noise, long durability. Keep your vehicle's tires in contact with the road. Restore your vehicle original ride, handling and control performance. Reduce vehicle bounce, roll and sway, brake dive and acceleration squat..
  • Wide Fitment: Air shocks is compatible with International Prostar Pro 2008-2017. 3595977C96, 3595977C95. The assembly of this article requires expert knowledge! After assembly, however, before t....
Check Stock

AUTOSAVER88 Front Air Suspension Spring Air Shock Absorber Replacement Compatible with 2000-2006 Mercedes-Benz S430 S500 S55 AMG S600 S-CLASS 1-Pack Front-1pcs

  • Type: Shock Absorber& Spring, Certificate: ISO9001, TS16949..
  • Reference OEM number: 2203205113, 2203202438，220320243860, 220320243880, 220320243888, 2203205113, 220320511360, 220320511380..
  • Compatible with : Mercedes-Benz S-Class 2000-2006 S430 /2000-2005 S500 / 2001-2006 S600 / 2001-2006 S55 AMG/ 2006 2007 S65 AMG. Not fit for 4 matic or....
  • AUTOSAVER88 Shock absorbers: Using high-density rubber combined with advanced sol-gel technology to improve the air tightness and durability of the....
  • Packaging: Including 1x Front Air Suspension Strut for front left or Right..
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • ... prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applic....
Check Stock

2 to 3 Ton 18 SEER Variable Speed MrCool Universal Central Heat Pump Split System - Upflow/Horizontal with Quick Connect Lineset - 25 Feet

  • High Performance: The Capacity: 3 Ton (6600 lbs).
  • The lifting height is 495~820 mm (19.5"* 32.3"), and its max support bar shaft open can be 60* 300 mm (2.4"* 11.8")..
  • Hydraulic Cylinder: Hydraulic cylinder is made with good tightness. There will be no oil leakage. And needs no efforts to operate the product for single person..
  • Flexible Compressor: There are 7 small holes on the column by which the compressor can be flexibly adjusted for a wide range of applications to suit the shock absorber springs of different models..
  • Easy To Use: This product has a foot pedal for easy and convenient operation, also make sure the use is safe, and saves time and effort for you..
  • Wide Application: - Suitable for the disassembly and assembly of strut type shock absorbing springs for cars, off-road vehicles, vans, pickup trucks and other vehicles..
Check Stock

VEVOR 2.5 Ton (5500 lbs) Strut Spring Compressor, Hydraulic Spring Compressor,Hydraulic Cylinder,Spring Compressor,2.5 Ton Auto Strut Coil Spring Compressor

  • Spring Size rang is 70~200 mm (2.8"~7.9").
  • The Jack Lifting Height: 495~820 mm (19.5"* 32.3")..
  • Hydraulic Cylinder: Hydraulic cylinder is made with good tightness. There will be no oil leakage. And needs no efforts to operate the product for single person..
  • Flexible Compressor: There are many small holes on the column by which the compressor can be flexibly adjusted for a wide range of applications to suit the shock absorber springs of different models..
  • Easy to Use: This product has a foot pedal for easy and convenient operation, also make sure the use is safe, and saves time and effort for you..
  • Wide Application: Suitable for the disassembly and assembly of strut type shock absorbing springs for cars, off-road vehicles, vans, pickup trucks and other vehicles..
Check Stock

16’ Wide Horizontal Garage Door Reinforcement U-Bar Strut Support Brace

  • One - 3 Piece 16’ Wide Horizontal Garage Door Reinforcement U-Bar Strut Support Brace, and Hardware. Stronger Than A One Piece Strut Right Where it Counts! Starting to Bow? Fix Garage Door Bow. Save Your Door And Extend Its Life!.
  • The strut is a three piece strut, and once quickly bolted together it will run the length of your 16’ door. A strut is also known as a u-bar or a brace. As your garage door opener opens it pulls on the middle of the door. Thus creating stress to the door with the risk of creasing the section and the collapse of the section..
  • This strut brace will help reinforce your garage door. Different model garage doors have different outside center stiles. The pre-existing outside center stile holes in the strut may or may not line up with your door’s stiles..
  • Not to worry this is common and not a problem. The included self tappers will drill holes in the strut to attach it to your stiles no matter their placement..
  • Included is 2 - 8 foot door strut support braces, 1 Strut Support Brace Coupler, Assembly Hardware, and Mounting Hardware. Because it’s ship....
Check Stock

BILITOOLS Strut Spreader Tool 2 Piece Suspension Tool Compatible with VW Audi BMW Mini Ford Renault ect.

  • Comes with strut spreader tool with 5.5 x 8 mm and 5 x 7 mm. 1/2" Drive.
  • 2 piece strut spreader is designed to expand the spring strut and ball joint mounting to separate the spring strut from the wheel bearing housing..
  • The strut spreader sockets are made with S2 steel for maximum strength and durability, and to resist rotational distortion..
  • The strut spreader sockets are featured an oval shaped head. This design makes it easier to rotate the strut tool in the strut channel..
  • Compatible with Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW and Japanese vehicles.
Check Stock

2 Truck Upfitters 17 Gas Props 17.1 Extended 9.9 Compressed 45 pounds of Pressure ea for are ATC Snugtop Leer Camper Shell/Truck Cap Rear Door Measurement Required! Incl 4 Ball mounts!

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL....
  • Truck Upfitters Pair of 45 pound (each) gas struts. 17.1" extended length and 9.9" compressed length. This size of door shock absorber is for tall....
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened &....
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and....
  • Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap....
Check Stock