ReviewsLag Bolts For Railing

Muzata 165ft Crystal Vinyl Coated Wire Rope 3/16\ Thru 1/4\ for 3/16\ Cable Railing System Galvanized Steel Cable 7x7 Strand Indoor Outdoor Decking Stair Balustrade DIY WR20 WP1

  • Cable railing kit product of Hong Kong company,it fits for 1/8 inch cable railing system. Made of US AISI standard 316 stainless steel for maximum corrosion resistance, durability and tensile strength.It can be used indoor and outdoor..
  • This cable railing hardware will make your cable railing more beautiful beacuse no need extra screws to install and no need turnbuckle to tension the cable..
  • This left & right hand thread design,It will rotate wire rope to the same direction and tighten the cable , Which also resolves the problem of twisting the wire rope (The fig.3 is key step of installation,It will help your installation easier and more beautiful)..
  • This cable railing kit include 40 pcs left and 40 pcs right thread lag screws ,1 pcs special drill bit ,1 pcs special wrench.
Check Stock

Muzata 60Pack Stainless Steel Protective Sleeves Cable Railing Kit Hardware for 1/8 Wire Rope Cable Wood Posts T316 Marine Grade Deck Stair Railing CR13,CP1

  • Protective Function -- These stainless steel protective sleeves fit 1/8" wire rope in level wood posts applications. Apply for both wood posts and....
  • Clean Finished Look-- The protector sleeves can cover the ragged holes after drilling and create a clean look, adding a nice touch to the overall look....
  • Marine Grade -- This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather.....
  • Pre-Designed System -- We pre-designed a WoodBudget cable railing system to help you construct a cost-effective system. It includes 1/8" swage lag....
  • Why Choose Us- MUZATA is a leading cable railing manufacturer offering premium products at competitive prices. Over years of research on cable railing....
Check Stock

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock

Neitra 30 45 90 Angled Drill Guide Jig for Cable Railing Lag Screw Kit Wood Post, Drilling Degree Angle and Straight Holes, Durable All Metal Drill Jig for Railing Deck Stair Handrail

  • ACCURATE THREE ANGLES: The Neitra cable railing drill guide jig dowel allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
  • FOUR SIZES GUIDE HOLES: With four sizes of drilling guide holes for each angle, 3/8″(9.52mm), 5/16″(7.93mm), 1/4″(6.35) mm), 3/16″(4.76mm), each compatible with most cable railing cable protector sleeves and lag screws. An efficient and compact angled drill guide that is easy to carry..
  • ALL HARD METAL MATERIAL: The drill jig for angled holes is set with ultra-hard chrome-plated steel sleeves, which is wear-resistant, sturdy, and durable, no need to worry about being worn when drilling, and the drilling accuracy is error-free as always. The main body of the railing drill guide is made of high quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, clear markings..
  • EASY OPERATION: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while ....
Check Stock

Muzata 10Pack 1/8 Invisible Cable Railing Kit Swage Lag Screw Tensioner CableGenie System Completely Hidden for Wire Rope Wood Posts T316 Stainless Steel 5 Cable Line CR73 CV1 CG1

  • Patent Invisible -- With this patent designed invisible tensioner kit, you can finally hide the whole cable railing kit inside the wood post to get a....
  • Reusable -- This invisible lag screw is beginner-friendly. The normal cable railing hardware has to be swaged and if you get a wrong measurement, you....
  • Marine-Grade -- This cable railing hardware is made of T316 stainless steel, which is rust-resistant and durable for both indoor and outdoor, even....
  • CableGenie system -- This product belongs to Muzata CableGenie system, a thoughtfully designed cable railing system for wood frames. We have planned....
  • Free Design Service -- If you are a beginner or not sure about how to do it, please reach us by clicking on "by Muzata" below "add to cart." Our....
Check Stock

Walrkaur 304 Stainless Steel Deck Railing Brackets for 2'' x4''(Actual 1.55'' x3.5'') Railing Wood Post (16pcs)

  • Patent Design - With a flexible separation design, Muzata angle protector sleeves fit 1/8" wire rope and are easy to install on stair railing and ramps at 10 30 35 degrees. If you need angles larger than 35°, pls choose CR69(45°Angle Protector Sleeve). Note: these cable railing kits are ONLY for WOOD posts. Package includes: 40packs angle sleeves, 40packs adhesive sleeves, 80pcs adhesives, 1pc drill bit(9/32").
  • Protective and Decorative Function - These stainless steel protector sleeves help protecting wood post and stainless steel cable from friction wear. Adding these protective sleeves will make it easier to stretch cable through posts and also beautify the rough edges of the drilled holes to create a clean look. Note: It works for wood posts only, not for metal posts.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - To help you construct a cable railing system, we pre....
Check Stock

Steel DN Mate 45 30 90 Degree Angle 4 Sizes Drill Jig for Angled Holes/Straight Holes, Drill Guide for Cable Railing Lag Screw Wood Post, Durable Aluminum Alloy Drilling Jig for Deck Stair Handrail

  • ...to use and carry. We enchase the holes with steel protective sleeves, so no worry about it may crack during drilling, causing the guide holes to get broken or inaccurate..
  • Accurate 3 drilling angles: There are 3 different angles in this portable metal drill guide: 30 degree, 45 degree and 90 degree. Building a stair railing becomes much easier and more, convenient with the 30° & 45° angle holes and 90° for horizontal and vertical straight holes.A new beginner can quickly drill accurate 30/45/90 degree angle holes with a electric hand drill in the post with this tool, time-saving and perfect finish..
  • 4 different sizes of holes: This cable railing drill template guide jig offers 4 different size holes, 3/16” (4.76mm), 1/4”(6.35 mm), 5/16”(7.93mm), 3/8”(9.52mm), which are compatible with most cable railing hardware. The hole drilled by 1/4” fits most 1/8″ cable railings lag screws..
  • 4 Application: This drill guides for portable drills is widely use to  install of wooden, and metal deck railing posts for cable railings and DIY woodworking/Handrail projects. It can work with 6” woodworking F clamp and C clamp for no shaking and safer drilling..
  • This drill guide for straight holes is a part of our cable railing system, we have everything n....
Check Stock

Heavy Duty Bolts, Concrete Anchors TV Wall Mount Screws Kit for Mounting A TV Into Wood Or Concrete

  • Re-mounting, but lost your old hardware? This kit includes everything you’ll need for wood or concrete installs..
  • Our lag bolts are custom-hardened to prevent snapping or breaking..
  • Note: Concrete anchors are not compatible with wood and drywall.
  • If you have any question? contact us please..
Check Stock

Muzata Drill Guide for Cable Railing Kit Lag Screw Fitting Wood Post Installation, Fit 90 Degree Horizontal Deck and 45 Degree Angled Stair, Visible Drilling Template Jig, Patent Design CT10,CT1

  • Accurate and Multi-Angle – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 45 degree angled holes for the wood railing posts. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes – This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 1/4”, 5/16”, 3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4” drill fit most 1/8″ cable railings lag screws. You can fix the steel sleeves by tightening the anchor screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System – We pre-designed a cable railing system to help you construct a beginner-friendly wood system. It includes 1/8″ togg....
Check Stock

Muzata 10Set Cable Railing Kit 1/8' Swage Lag Screw Turnbuckle Hardware Tensioner T316 Stainless Steel for Wood Post System Angle Stairs Deck 10 Cable Lines CK13,CA4 CA5

  • Elegance Look and Anti-twist- This cable railing fitting is well-designed in one piece to provide a pretty and elegant appearance. The turnbuckle could be adjusted from 8 3/16” to 11 1/32” to tighten the wire rope. Moreover, with right and left handed thread swage lag screws, wire rope can rotate in the same direction without twisting or damaging. Package includes: 10 right-hand turnbuckles, 10 left-hand terminals, 1pc bent wrench. It can make 10 cable runs.
  • For Level and Angle – This cable railing kit could work for both level and stair railings. That allows you to keep the same style on the level and angle sections. Recommend using with our patent angle drill guide Muzata CT19 to drill multi angle holes.
  • Marine Grade – This deck railing kit is made of T316 marine grade stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • WoodElegance System – We pre-designed a WoodElegance cable railing system to help you get a fully customized project. It includes cable railing kits Muzata CK13, level and angled protector sleeve (CR13-level, CR68-25-35°), 1/8″ wire rope Muzata WR01, hydraulic crimper and cutter set Muzata CK12, drill guide Muzata CT09. (Please not....
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock