ReviewsLag Bolts With Internal Threads

Mitutoyo 188-152, Inch/Metric Screw Pitch Gage, 4 to 56 TPI, 0.5mm to 6mm, 28 Leaves

  • 51 BLADES SCREW PITCH GUAGE FOR THREAD SIZE CHECKING OF VARIOUS SCREWS & BOLTS.
  • 55 DEGREE BRITISH WHITWORTH BSW & 60 DEGREES METRIC THREAD PITCH GAUGE.
  • This pitch gauge accurately measures internal and external screw threads..
  • The leaves are individually stamped with accurately formed thread profiles..
Check Stock

1/4 Hex Lag Bolts Stainless Steel 18-8 304 VIGRUE 108PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Length Include 1 1-1/2 2 2-1/2 3

  • Premiun Material: Heavy duty screw bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant..
  • Mighty Grip: these bolt screws feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • Standard and Various Sizes: the kit includes 5 different most common used sizes: 1/4 x 1", 1/4 x 1-1/2", 1/4 x 2", 1/4 x 2-1/2", 1/4 x 3".
  • Quantity: 108 pieces screws and washers in total (54 sets).
  • Projects Helper: These wood bolts screws are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load.
  • Suitable for industrial, exterior and household applications, liking deck building or joining lumber..
  • GUARANTEE in VIGRUE: our hex lag screws undergo rigorous inspections to ensure they are 304 stainless steel and the right size you want.
  • VIGRUE is a professional fasteners seller brand, providing lifetime service for our product quality problem.
Check Stock

Wej-It DES14 Expansion Shield Anchor, Zamac Alloy, Meets GSA FFS-325 Group II Type 2 Class 2 Style 2, 1/2\ Diameter, 1-5/16\ Length, 1/4\-20 Threads (Pack Of 100)

  • CORROSION RESISTANT BODY - Anchor body can be used in environments where moisture may be present.
  • CORROSION RESISTANT BODY - Anchor body can be used in atmospheres where moisture may be present.
  • EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength.
  • ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find.
  • EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor.
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

Stainless Steel Concrete & Stone Drop in Female Expansion Anchors with Setting Tool 1/4 -20 x 1 Qty 20

  • 304 Stainless Steel Drop In Masonry Anchors with Matching Setting Tool.
  • Each pack contains one set tool designed to set the size of anchor.
  • Corrosion and rust resistant 304 Stainless Steel Drop In Anchors.
  • Installed crimped side down in a pre-drilled hole, then set with included tool.
  • Internal threads to anchor fixtures to concrete with bolts or machine screws.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

KECHUANG 60-Pieces Tap and Die Set Metric and SAE Standard Internal and External Threaded Tool Set

  • ► PREMIUM MATERIAL- Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ► EXCELLENT CUTTING PERFORMANCE-All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance, Can cut materials such as cast iron, steel, aluminum, copper, Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • ► VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ► EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • ► WIDE APPLICATION: Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Check Stock

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

  • EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
  • HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
  • PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
  • EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
  • REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....
Check Stock

(8 Sets) 1/4-20 x 3/4" Grade 5 Carriage Bolts w/Washers & Nuts - Choose Size

  • Convenient pack of 8 bolts, 8 flat washers, 8 lock washers, and 8 nuts.
  • Made of grade 5 medium carbon steel and zinc plated for corrosion resistance.
  • Grade 5 bolts are ideal for automotive applications where high strength is needed.
  • Size Information: Diameter = One quarter inch, Length = bolts are measured by the distance from the end of the bolt to the head (not including the head itself).
  • Thread Information: 20 TPI = 20 Threads Per Inch (standard coarse threads).
Check Stock