ReviewsLag Bolts With Molly Bolt

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

BOSCH GDS18V-221N 18V EC Brushless 1/2 In. Impact Wrench with Friction Ring and Thru-Hole (Bare Tool)

  • Impact wrench design – built to deliver high torque for tightening such fasteners as lag bolts, concrete anchors and lug nuts.
  • Powerful motor – delivers up to 221 Ft. -Lbs. of torque to drive large fasteners quickly.
  • Auto Bolt Release – stops rotation when there is no torque on tool to prevent accidentally dropping bolts and nuts during removal.
  • Delivers 221 Ft. -Lbs. of torque – ideal for fast tightening and removing of heavy-duty fasteners.
  • Compact tool design – weighs only 2. 77 Lbs. (tool only, not including battery) and has a 6. 4 In. head length.
Check Stock

American Standard 0451021.020 Wall-Mounted Lavatory Sink, 1-1/4 in, White

  • ... washroom without occupying much space. Grab this tiny elegant white wall mounted sink now and add an instant trendy classy mood to your bathroom..
  • LAG BOLT SLIP ON INSTALLATION - It includes all the installation hardware and consists of a Lag Bolt Slip-On design. You can easily install the mount and the sink on two bolts without needing any bracket. Install within minutes and have it securely mounted on your wall..
Check Stock

Werkzeug Damaged Stripped Screw Extractor Set for Broken Screw, All-Purpose HSS Broken Bolt Extractor Screw Remover Set with Magnetic Extension Bit Holder & Socket Adapter (22 PCS )

  • Damaged Screw ExtractorWerkzeug screw extractor is made of high quality High-Speed Steel 4241. High hardness, durable and easily remove damaged screws.
  • In one stepThe stripped screw extractor set is included two extension bit holder. Can remove in one step, do not need to conversion the extractor or adjust the chuck.
  • Extremely VersatileThe stripped screw extractor kit is includes 20 pieces of stripped screw extractor in 10 different sizes to satisfy all you demand. Suitable for any sizes screw or bolt.
  • MultipurposeSuitable for allen bolts, machine screws, lag bolts, wood screws, hex bolts, sheet metal screws and other screws.
  • ImportantIt is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use!.
Check Stock

MaxxMMA Heavy Duty Adjustable Speed Bag Platform Kit 24 + Speed Ball 10 x 7

  • Height adjustable up to 8" in 2" increments for individual needs.
  • Professional grade design with 24-inch diameter / 1.5 inch thick board for stabilization.
  • Kit includes: speed bag (10" x 7"), speed bag swivel and hand pump with needle.
  • One-Year Free Replacement on the speed bag. Please contact the Seller if you have any problem with the products..
  • Wall mount hardware not included. (It's suggested to use lag bolts on wood stud walls, or masonry anchors on concrete walls. Bolt size 5/16" or 3/8", at least 4" long.).
Check Stock

4Packs Universal Toilet Bolt Caps Round Plastic Push-On Toilet Bowl Bolt Caps Covers with Extra Washers for Easy installation 1.44 Inch Height White Color

  • [UNIVERSAL TOILET BOLT CAPS] -The toilet bolt covers are used to conceal toilet bowl installation fasteners without ugly bolts outside there. Don't cut those bolts. Jwodo toilet bolt caps can universally fit and cover different size toilets bolts..
  • [EASY TO INSTALL] - The Jwodo Toilet Bolt Screw Covers are easy to install with snap-on inserts. You only need some simple household tools to complete the Installation, as easy as a do-it-yourself project. Jwodo toilet bolt covers work with most toilets and bolts. Itâ€s an economical and efficient solution to covering sometimes rusted or dangerous toilet floor bolts..
  • [USEFUL TOILET HARDWARE] - The Package includes 4pcs toilet bolt caps, 4pc cap washers. They are all high-quality products, good replacement for your worn-out toilet bolt covers, or covering up any unsightly, protruding or rusted toilet floor bolts, which will help update the look of the bathroom and secure safety of your family..
  • [PREMIUM DESIGN] - Jwodo universal toilet floor bolt caps are in round shapes, with decorative push-on toilet cap design. The toilet bolt covers will not pop off like some toilet bolt caps and can enhance your bathrooms look by covering the rusted toilet bolts. The 1.44 Inch extra high toilet bolt caps have a univer....
Check Stock

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

  • 1.【Premiun Material & Mighty Grip】Heavy duty screw bolts are made from 304 stainless steel and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners.These lag bolts for wood is coarse threads for superior holding, will not strip off..
  • 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2",3/8×2",3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
  • Quantity: 60 pieces screws and washers in total (30 sets)..
  • 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber,and DIY design..
  • 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous ins....
Check Stock

B BOSI TOOLS 12 Piece Damaged Screw Extractor Set, Stripped Screw Extractor Set, Quickly Remove All Common Sizes of Damaged, Broken or Stripped Screws

  • ...ce Screw Extractor Set】The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • 【Wide Compatibilit】IBasically meet all your needs for various screws extracting. Such as allen bolts, lag bolts, hex bolts, machine screws, wood screws, sheet metal screws and other screws. A screw extractor set solves most of your home’s problems with screw repairs, including wall panels, wood and sheet metal bolts..
  • 【Easy to Use】With the support of adapter bracket and extension rod, the damaged screw can be easily removed without wasting time and energy, and the operation is simple and convenient.the screw remover set comes with an essential tool kit box, it’s very convenient to put it into your bag or take it anywhere you want. You can easily remove any stripped screw in 10 seconds or less..
Check Stock

Sram Red 52T 110mm Black Chainring

  • RocRide Single Chainring Bolt Set Comes With 5 Bolts And Can Be Used On Chainrings That Require 4 or 5 Bolts. 7mm Thread Depth. 10mm External Width. Use for Hole Depths of 5-9mm..
  • Bolts Are Available in Durable Steel for a Classic Look or Lightweight Anodized Aluminum to Match Your Chainring Color. Colors Include Black, Blue and Red..
  • Aircraft Grade 7075-T6 Aluminum Is Strong And Lightweight with Each Bolt Weighing Around 1.5 Grams Each..
  • Classic Look Steel Bolts Provide Rugged Durability and Weigh Around 4 Grams Each. BOLTS WILL NOT BE LONG ENOUGH to add accessories like bash guards to chainring. For that purpose you should use a double or triple width bolt..
  • Bolts are 2 Piece Design and Require a Standard Chainring Bolt Wrench to Install or Tighten. We Recommend Steel Bolts Be Tightened to 12Nm..
Check Stock

Heavy Duty Metal Setting Tool, Paick Hollow Wall Metal Cavity Anchor Plasterboard Fixing

  • HIGH GRADED SETTING TOOL - This hollow wall anchors gun has a high strength steel body with drop forged carbon steel upper handle. Thicker steel & chromium alloy wrench ensure greater durability and longer lifetime..
  • ONE-HANDED OPERATION - Heavy duty metal setting tool size: approx. 6.88" x 2.75" x 0.98". Small but powerful, it can work perfectly in one-handed operation. With ergonomic type shape non-slip grips, protects you from getting hurt when using it..
  • HOW IT WORK - For setting cavity wall fixings into hollow stud walls accurately and quickly. Place Anchor into pre-drilled hole, attach setting tool and squeeze trigger..
  • WIDELY APPLICATIONS - Perfectly works with M3/M4/M5/M6 Molly Bolts for cavity anchor plasterboard fixing, widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
  • PACKAGE CONTENT - In this kit, it include a heavy duty gun with 5 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm total 18pcs molly bolts, convenient for your use and storage..
Check Stock

4 Pieces Toilet Bolts Caps, A.I.FORCE Toilet Bolt Covers, Universal Toilet Floor Caps with Extra Washers for Easy Installation, Plastic Round Push-On Toilet Bowl Bolt Caps Covers, 1.44\ Height, Almond

  • [UNIVERSAL TOILET BOLT CAPS] - The toilet bolt covers are used to conceal toilet bowl installation fasteners without ugly bolts outside there. No need to cut those bolts. The toilet bolt cap kit can universally fit and cover different size toilets bowl bolts..
  • [EASY TO INSTALL] - The toilet bolt screw covers are easy to install with snap-on inserts. You only need some simple household tools to complete the Installation, as easy as a do-it-yourself project. By the toilet floor bolt caps, it is an economical and efficient solution to covering sometimes rusted or dangerous toilet floor bolts..
  • [USEFUL TOILET HARDWARE] - The Package includes 4pcs toilet bolt caps, 4pc cap washers. They are all high-quality products, good replacement for your worn-out toilet bolt covers, or covering up any unsightly, protruding or rusted toilet floor bolts, which will help update the look of the bathroom and secure safety of your family..
  • [WELL DESIGNED] - The universal toilet floor bolt caps are in round shapes and almond color, with decorative push-on toilet cap design. The toilet bolt covers will not pop off like some toilet bolt caps and can enhance your bathrooms look by covering the rusted toilet bolts. The 0.85 Inch height toilet bolt caps have a universal fit that is....
Check Stock