ReviewsLand Rover Key Shells

KEY GM A6 R4 SHAFT

【Fits】A perfect replacement replacement for your key with broken buttons or worn key blade,Fits Land Rover Discovery 2 TD5 A76 Black..
【High Material】Made of high quality ABS material and very durable..
【Just a Shell】Inner remote is not included and you can use your old remote..
【Easy to Install】No programming require with your old remote..
【Convenience】Easy installation and you need just take the internal electronics from your original remote and place them to our key shell..

Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

Injector Removal Tool Puller for Land Rover 5.0 3.0.
Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.

Check Stock

FEYOUN Key Fob Cover Compatible with Jaguar F-Pace F-Type XE XF XJ Land Rover Discovery Range Rover Smart 5 Buttons TPU Remote Keyless Key Fob Case Protection Shell Accessories, White

Fit for Vehicles - Compatible with Jaguar F-Pace F-Type XE XF XJ Land Rover Discovery Range Rover Smart 5 Buttons Key. Please reconfirm your fob key with 2nd image before order..
Protection - Front and back sides coverage protection for your expensive fob, prevents your keys from drops, bumps, breakage and scratches..
Stylish Design - With luxury golden edges, the key case adorns you key like new and stylish, not affect the fob signals and key performance..
Material - Made of flexible and durable TPU with smooth touch feeling, it is 1:1 mould opening with precise buttons position, custom-made for your fob..
Package Included - a TPU key fob case. Note :The product not included the key. Any questions, please rest assured and feel free to contact us via Amazon Message..

Check Stock

VMS RACING 94-97 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1994-1997 1.8L BP-ZE Engines ONLY OEM SIZE (uses same belts)

APPLICATION ENGINE -- 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN. Replace OEM 303-1437.
FOR VEHICLE MODEL -- For Jaguar vehicle applications include: F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018, For Land Rover vehicle applications include: Discovery 4/Discovery, For Range Rover, Range Rover Sport 2009 - 2018..
FUNCTION -- Set of tools required for the removal and installation of the front crankshaft pulley(Crankshaft Vibration Damper) for Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. A must have for removing and installing for land rover jag crank pulley..
BENEFITS -- The crankshaft pulleys used on these engines are tightened to 200 Nm + 270 degrees, so are very tight to undo. This kit helps hold the pulleys tight. Also included in the kit are the puller component’s required to remove the pulley without damage..
SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.

Check Stock

Transmission Filter Service Kit with Upgraded Premium Components and Easier Installation for Land Rover LR3, LR4, Range Rover, and Range Rover Sport

Land Rover Transmission manufacturer ZF recommends changing your transmission oil and filter every 50,000 to 75,000 miles for an optimal performance..
Save Time and Money: This premium kit offers an alternative installation process that is much easier than the standard transmission service routine. Instead of jacking up the motor, you just simply remove the sumps filter tube all together. The new separate filter is then fitted and then pan is bolted up with gasket provided..
Premium Replacement Parts: In addition to the OE transmission filter, this kit comes with a premium steel sump pan versus the genuine plastic pan..
This kit is designed specifically for the Land Rover LR3 / Discovery 3 (2005 - 2009), LR4 / Discovery 4 V8 5.0 Liter Engine (2010 - 2013), Range Rover L322 4.4 (2006 - 2009), Range Rover L322 4.2 Supercharged (2006 - 2009), Range Rover L322 (2010 - 2012), Range Rover Sport (2006 - 2013).

Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

Applicable Engine: 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN, OEM Equivalent 303-1437.
Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley t....

Check Stock

Terrafirma All-Terrain Shock Kit STC3703 STC3941 for Land Rover Defender Discovery 1 and Range Rover Classic

Tough twin tube design allows for a large volume of oil for cooler internals and improved protection of working parts..
Built with the largest possible fully welded mounting pins and rubber bushes for maximum strength and durability..
Tough enough to handle the punishment of recreational off-roading yet refined to provide a comfortable, well balanced and controlled ride on road..
Replaces Land Rover OE Parts STC3703 and STC3941.
Fits Land Rover Defender 90 (1994 - 1997), Defender 110 (1993), Discovery 1 (1994 - 1999), and Range Rover Classic (1987 - 1995)..

Check Stock

OTUAYAUTO Front Wiper Blade Arm Retaining Clip Replacement for Range Rover 2003-2012 Discovery 2 1998-2004 - Replace OEM# DKW100020 pack of 1

【Fitment】Replacement for Land Rover Range Rover 2003-2012, Land Rover Discovery 2 1998-2004.
【OEM】Meets Or Exceeds OEM Specs, OEM : # DKW100020, Size: 7.3cm x 1cm x 1cm.
【Material】ABS, AAA level, the guarantee of quality and product testing.
【How to use】 Clips the new part on your new correct blade then clip the new part to the end of the wiper arm.
【Package】Comes with 1 pcs x front wiper blade clips, easy installment, perfect replacement.

Check Stock

Supercharger Coupler Isolator Oil Filled Nylon fits Jaguar Range Rover Land 5.0

Aftermarket Oil Filled Nylon Isolator (Coupler).
Direct replacement for the spring loaded noisy isolator in your Land Rover Jaguar 5.0 Engine supercharger.
These solid isolator are direct replacements for the original spring isolators.

Check Stock

Supercharger Coupler Isolator Oil Filled Nylon fits Jaguar Range Rover Land 3.0

Aftermarket Oil Filled Nylon Isolator (Coupler).
Direct replacement for the spring loaded noisy isolator in your Land Rover Jaguar 3.0 Engine supercharger.
These solid isolator are direct replacements for the original spring isolators.

Check Stock

2-Pieces Black High-Grade License Plate Frame for Land Rover,Applicable to US Standard car License Frame

★A MUST HAVE Our Land Rover License Plates Frames is the perfect solution to keep your License Plate in a great condition. Great Design it will not block in all four corners of the plates state registration tags and they're legal to be on road, Comes in a 2 pack for the front and back of your car license plates..
★High-grade resin logo, better decorate your Land Rover license plate cover, attract more attention.
★Universal fit & easy installation / Screws and Caps Included!!Includes spacers and and caps.Fits standard car license plates, the license plate set can be extremely easily and quickly mounted with no vehicle modifications required. A set of two, for both rear and front license plates..
★This product is hand-crafted ,The surface matte feels very comfortable. Make your license plate stand more upscale Aid Azrsva.
★Buy It Now With Confidence, This Best ★ TOP QUALITY Land Rover LICENSE PLATE FRAMES★100% We Guarantee Satisfaction With a 100% Lifetime Money Back Guarantee..

Check Stock