ReviewsLarge Core Optical Couplers

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Armored 100Gb LSZH Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g qsfp+ 100gbase mmf ofnr lc-lc

  • Fiber Cable Description: Armored OM4 LC to LC Fiber Patch Cable 3 Meter | 100Gb Duplex LC LC Multimode Fiber Patch Cable 50/125 Corning optical fiber core/cladding. Ceramic ferrule LC to LC fiber patch cable connectors. High bandwidth 100G multimode optical fiber for high speed, low loss, data transmission. Armor wrapped aqua 2.0mm diameter, OFNR jacket, zip-cord. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Laser Optimized MMF Zip-Cord Reinforced, Multimode LC to LC Armored Fiber Optic Patch Cable, Fiber Jumper Cord.
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Eth....
Check Stock

EMVANV 2 in 1 Out Optical Audio Splitter, Splitter Fiber Replacement Dual Port Optical Adapter Audio Cable for Home Theatre (Black)

  • If a power amplifier has only one fiber interface, and there are two fiber interfaces that need to be connected to the power amplifier, use this adapter to get it..
  • Use to reduce the device interface interruption caused by frequent device ging.
  • Enjoy Excellent Sound Experience: Fiber Optical Audio Splitter adopted High quality low-loss Fiber optic core and fiber optic heads, Large capacity, low attenuation, strong anti-interference, bring you excellent sound quality experience.
  • Fiber Splitter 1 in 2 Out: Ideal for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder..
  • Optical Splitter: Plug and play, no need for other equipment and softwareSmall and exquisite, easy to use, easy to carry, easy to store.
Check Stock

Kegco 3PHBK309B-2 Keg Dispenser, 2 Tap, Black

  • Kegco 3PHBK309B-2 Homebrew Kegerator comes complete with a stainless steel two faucet draft tower, two set of ball lock keg couplers, a two product dual gauge CO2 regulator, and an empty CO2 tank.
  • Large interior easily holds up to three home brew kegs and can also be used as a fermentation chamber or an all-refrigerator.
  • Digital temperature control and fan-forced cooling provides one of the largest temperature ranges on the market (32 to 75 degrees Fahrenheit).
  • Kegerator also features a chrome guard rail, easy-roll locking casters, and dishwasher-safe removable built-in drip tray for easy clean-up.
  • PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs.
  • it will not tap commercial D system kegs.
Check Stock

Russian Piping Tip Couplers 4Pcs/set KOOTIPS For Large Size Icing Nozzles | Quickly & Easily Attach and Swap Piping Tips Mother Gift

  • Perfect for making your own beautiful and unique cakes,puff,or pastry.
  • Four Russian Piping Tip Couplers for Large Size Russian Piping Tips, One are 3-Color Couplers.
  • Suit for round bottom Russian piping tips nozzle diameter about 1.46 inch,about 3.7cm, please see clearly in picture before buy!.
  • Compatible with all Plastic, Cotton, and Silicon Piping Bags, Color are random.
  • Quickly and easily swap piping tips without discarding your piping bags.
Check Stock

SKYSHL Core Alignment 4.3inch Touch Screen FTTH Optical Fiber Fusion Splicer (With 5pairs Electrodes,Fiber Cleaver and Tool Set) Handheld SM MM DS NZDS Fiber Splicing Machine (SS414F)

  • ★Core Alignment Fusion Splicer★--SKYSHL SS414F is a core alignment fiber fusion splicer with advanced image processing technology.
  • in order to ensure high-precision fiber core-to-fiber core alignment and splicing, SS414F adopts high precision CMOS camera, optical system and servo system.
  • and use high-precision CNC machining of optical fiber fixing clips, V-shaped grooves and other metal parts..
  • ★Fast splicing and heating★--The SKYSHL SS414F welding machine uses a powerful high-speed motor and a high-performance CPU, which can achieve a fast splicing time of 6 seconds and a heating time of 13 seconds (fast mode), which greatly improves the work of the engineer Efficiency.
  • SS414F fusion splicer is very suitable for data center, Metro, LAN and FTTx fiber projects..
  • ★4.3-inch touch screen design and durable appearance design★--SS414F optical fiber fusion splicer is equipped with a 4.3-inch TFT touch screen, which is simple and intuitive to operate. The SS414F optical fiber fusion splicer adopts a lightweight and sturdy aluminum alloy shell and an integrated silicone protective cover, which makes it resistant to impact, windproof, waterproof and dustproof, so as to meet the requirements of various harsh environments..
Check Stock

Dell Studio XPS 8100 G3HR7 Desktop (DT) Motherboard Systemboard Mainboard

  • ...-Pin Connectors, PCI Express x16 one 164-Pin Connector.
  • Peripheral Interfaces: Network adapter RJ45 connector USB two top-panel, two front-panel, and four back-panel USB 2.0-compliant connectors, Audio top panel - one headphone and one microphone connector, back panel six connectors for 7.1support S/PDIF one S/PDIF (optical) connector, eSATA one back-panel connector, IEEE 1394a one back-panel 6-pin serial connector, HDMI 19-pin connector, DVI 24-pin connector, Motherboard Compatible Part Number: G3HR7, **This Motherboard DOES NOT Include The Following: Case, Processors, Heatsinks, Hard Drives, Optical Drives, Video Cards, Memory, Manuals, Etc..
Check Stock

5DN3X Dell Studio XPS 9100 Intel Desktop Motherboard s1156, MIX58EX

  • ...-Pin Connectors, PCI Express x16 one 164-Pin Connector.
  • Peripheral Interfaces: Network adapter RJ45 connector USB two top-panel, two front-panel, and four back-panel USB 2.0-compliant connectors, Audio top panel - one headphone and one microphone connector, back panel six connectors for 7.1support S/PDIF one S/PDIF (optical) connector, eSATA one back-panel connector, IEEE 1394a one back-panel 6-pin serial connector, HDMI 19-pin connector, DVI 24-pin connector, Motherboard Compatible Part Number: G3HR7, **This Motherboard DOES NOT Include The Following: Case, Processors, Heatsinks, Hard Drives, Optical Drives, Video Cards, Memory, Manuals, Etc..
Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dx Yellow Zip-Cord PVC ofnr lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 3 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications....
Check Stock

EBLLPA 12 Pack Russian Piping Tip Couplers Cake Decorating Couplers Pipe Tip Couplers for Icing Nozzles Large

  • MATERIAL: Cake decorating couplers are made of sturdy plastic, durable and reusable..
  • Attach and swap large size russian piping tips icing nozzles in seconds, without discarding your piping bags..
  • Size: 4.2cm/.65inch at the bottom, 2.2cm/0.87in at the top, lid top hole 3.5cm/1.4in high. Overall product size: 4.2*4cm/1.65*1.6inch.
  • 12 pieces pipe tip couplers, enough for your different usages. Save time, convenience, and reduce waste. Easy to use and Clean..
  • Easy to use. Cut a tiny hole in the bag corner, insert the coupler, then attach the tip and screw on the ring, after done, remove the tip and coupler,....
Check Stock

Fiber Optic Drop Cable Stripper for FTTH Drop Cables (Stripping Plier for Rubber-insulated Optical Cable) and CFS-3 Fiber Optic Stripper ( 3 Port Hole Fiber Optic Stripping Tool ), Fiber Tool Kit

  • 【FTTH Cable Striping Plier】The blade is sharp, which can easily strip the thread. It will not damage the optical fiber core when stripping the outer cable. The blade is not exposed, and it can prevent blunt objects from colliding with the blade and causing damage to the blade. It also can prevent the blade from scratching the user. 2.4-inch scale ruler, which is clear to ensure the accuracy of the peeling length. You can choose the peeling length you need. Easy to use, increase work efficiency..
  • 【FTTH Cable Striping Plier Applicability】Adaptive range: Indoor 3mm (W) * 2mm (H) optical cable.
  • Adaptive optical fiber: 1/2 core optical fiber.
  • Adaptive coating diameter of optical fiber: Φ0.25mm & Φ0.9.
  • Adaptive cladding diameter of optical fiber: 125μm..
  • 【CFS-3 Fiber Optic Stripper】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
  • 【CFS-3 Stripper Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer....
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack,in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock