ReviewsLarge Diameter Boring Bar

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...older are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

Accusize Industrial Tools 5/8'' Sclcr Indexable Boring Bar with 1 Ccmt32 Insert, P252-S405

  • Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
  • Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction:right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...older are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

HHIP 1001-0201 Indexable Tool Set, 2 Boring Head, R8 Shank, 4 Boring Bars

  • Boring head features a 1-1/2"-18 threaded back so you can change shanks as needed.
  • A micrometer lead screw provides 0. 001" direct reading accuracy and makes adjusting easy.
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

Accusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035

  • General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
  • The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
  • The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
  • Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
  • Extreme gloss finish, Bar hardness approximately 45HRC.
Check Stock