ReviewsLarge diameter Bolts

ALCOA 10 33mm Chrome Screw On Hex Lug Nut Covers with Flange for hub Covers

✅1.Condition: Brand new and high quality, well packed. Dimensions: Inner diameter - 17mm..
✅2.These caps fit any car wheel 17mm bolts or nut. The caps won't work for Audi Q7. Please kindly measure your car's bolts before ordering..
✅3.Easy to fit,simply push down onto your bolts for a firm fit..
✅4.Reference:AUDI, BMW, MERCEDES, Nissan, fits for OEM hex lug nuts 17 mm in diameter..
✅5. package includes: 20 pcs Universal 17mm Wheel Lug Nut Bolt Cover Caps + 1 Removal Tool (Black).

Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....

Check Stock

4PCS Universal Toilet Tank to Bowl Bolts Kit, Heavy Duty Toilet Bolts, Waterproof Stainless and Rubber Washers Gaskets with Extra Long Nut Screw for Fastening (Silver)

...semble with some simple tools. You just need to install it with a screwdriver, simply remove broken bolts, clean around the area and then fit the new bolts, which can bring much convenience to your life and improve the happiness index of life..
【Detail Size】Bolt: 2.6 inches, wing nut length: 1 inch, flat gasket diameter: 0.9 inch, hexagonal nut diameter: 0.4 inch, rubber gaskets diameter: 0.8 inch, diameter of cone gasket: 1 inch, proper size for you to use, please check the size carefully before purchase..
【What You Get】You will get 4 x heavy duty toilet bolt sets, , including stainless steel bolts, washers and nuts, rubber washers, sufficient quantity for you to use and replacement..

Check Stock

(10 pc)1/4-20 x 2\ Long Square-Neck Carriage Bolts Set w/Nuts & Washers,Zinc-Plated,Carbon Steel Grade 2,by Fullerkreg

Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening..
Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee.
Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is ¼ inch and lengths is 2 inch..
Package includes ten each of bolts, hex nuts & washers.

Check Stock

1/4-20 x 3/4 1/2 to 6 Available Carriage Bolts Screws Stainless Steel 18-8 304 Round Head Square Neck Fully Threaded 25 PCS

The carriage bolts are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
These bolts can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems..

Check Stock

Crib Screws Parts Replacements - M6 Baby Bed Crib Bolts and Barrel Nuts for Furniture Bed Cot Bunk 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm Crib Bolts

This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost 1 or 2 baby bed bolts or nuts, this kit is your choice. ..
This crib screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts and 3 size barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) and one free hex key..
Our crib screws bolts and nuts are universal, they are made of carbon steel, they are solid replacements parts for most cribs [but not for all cribs], beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. (for Woodwork Only).
Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to confirm the right size you will need,.

Check Stock

4 pc 3/8-16 x 5 Long Square-Neck Carriage Bolts Set w/Nuts & Washers,Zinc-Plated,Carbon Steel Grade 2,by Fullerkreg

Carriage Bolts are a robust and durable fastener solution. Carriage Bolts feature a square section underneath their head, which makes them self-locking when used within a square hole..
About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening..
Zinc-plated steel bolts resist corrosion in wet environments.Fullerkreg Fasteners are always backed by a 100% satisfaction guarantee.
Imperial Carriage Bolts conform to ANSI standard B18.5. Diameters is 3/8 inch and lengths is 5 inch..
Package includes ten each of bolts, hex nuts & washers.

Check Stock

1/4-20 x 2-1/2' (1/2' to 6' Available) Carriage Bolts Screws, Stainless Steel 18-8 (304), Round Head, Square Neck, Fully Threaded, 25 PCS

The carriage bolts are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
These bolts can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems..

Check Stock

Binding Screw, PK5

Product Type: High Quality Stainless Steel Furniture Bolts Nuts Set..
Outer Diameter: 8.0mm, fit for 5/16" (8mm) Hole Dia..
Package Included: 10 Pairs (10 PCS Furniture Bolts and 10 PCS Barrel Nuts)..
Ideal Application for all kinds of DIY art, leather crafts, and clothing making..

Check Stock

MroMax Knurled Thumb Nuts, M6 Through Hole Round Knobs ，Whitewash 304 Stainless Steel, Pack of 6

✅【DIMENSION】- Threaded Size: M6 x 1.
✅【MATERIAL】- These Thumb Nuts made of 304 stainless steel ,rustproof and durable to use..
✅【ADVANTAGE】- To open and close the air box cover without tools.This facilitates tightening by hand, commonly used in electronics applications..
✅【Feature】- Common on 3d printer beds, machine tools, cabinets, tool boxes, and great for maker projects and things that need adjusted quickly. Works with bolts, studs and screws..
✅【PACKAGE CONTENT】- 6 x M6 Knurled Nuts.

Check Stock

Felled Logging Peavey Log Roller Lifter Attachment - 8in Lifting Log Cutting Stand Fits Log Peavey and Cant Hooks

[Create Space for Safe Cutting]: Logging cant hooks, log peaveys, and log puller tools are great for moving trees and timber.
But when you need to cut down logs, raise them a full 8 inches (20.3cm) from the ground with the Felled Large Cant Hook Stand.
[Fits Your Logging Tools]: Lumberjack log roller tool log jack comes in 2 parts to fit around your lumber cant pole or log peavey heads with 1.75 to 2-inch (4.5 to 5.1cm) diameters.
[Grab and Lift Logs in 1 Motion]: Wrap your large log cant hook around your log then use leverage to flip the timber on top of this onto tree cutting equipment tree log grabber lifter tool easily.
Turns your large log roller tools into arborist chainsaw mill log stands.
[Built to Last]: Steel log pole jack provides a sturdy hold by featuring a 10 inch (25.4cm) long 1.8-inch (4.6cm) diameter base bar.
Zinc plating ensures durability and resistance to wear from elements.
[Easy Assembly]: Included nuts, bolts, and L wrench make it easy to attach this large timberjack log lifter to your existing tree logging equipment tools.
Quick assembly has you cutting and debarking in no time.

Check Stock