ReviewsLarin Ton Jack Stand

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

[50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
[LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
[BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
[LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
[NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..

Check Stock

BEETRO 3 Ton Electric Car Jack 12V Scissor Jack Lift with Electric Wrench, Electric Jack for Car Sedan SUV Tire Changing

RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....

Check Stock

2 Ton Heavy Duty Floor Jack, Lifting Range 5-1/8\ to 13\

Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
The floor jack has a large saddle surface area for better contact with the load being supported.
Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..

Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

[DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 6 ton bottle jack..
[BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
[SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
[SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
[PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
[WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-....

Check Stock

TONDA Jack Stands, Double Locking Pins, 2 Ton Capacity, 1 Pair

PRODUCT PARAMETERS: Rated capacity: 2 ton (4000 lbs).
SELF-LOCKING DESIGN: These jack stands are forged iron self-locking ratchet bar for ease of use means no locking key is necessary.
when the handle is up, ratchet can be adjusted to any height freely. And when it down, ratchet will be locked automatically.
LARGE FOOT BASE: Oversized foot base (7.68” by 7.68”) provides strength and stability under load. Foot pads enable jack stand can be used even on soft ground.
Durable steel frame with rustproof coating prolongs the jack stands’ service life.
WARRANTY: Meets ANSI/ASME PALD 2014 standards and includes a limited 1 year manufacturer warranty. If there are any problems with our products, please feel free to contact us.

Check Stock

Toolsempire Underhoist Tripod Stand 2 Ton High Lift Jack Stand Reach Under Hoist Stand

【2 Ton Bearing-Capacity】This high jack stands is made of heavy duty no.235 steel. And the handle of the stand incorporates a thrust bearing that makes it easy to turn, even under the extreme pressures of a heavy load..
【Height adjustable】Adjusted from 49'' to 84'', Min.Height: 1250mm, Max.Height: 2128mm. And the large saddle design cradles the work-piece, allowing the stand to be properly positioned underneath the load..
【Safe and Stable】Heavy duty welded steel construction, a large 24'' x 24'' tripod base adds load stability from the ground up..
【Easy to Operate】Rotary handle bears any weight easily while you adjust the height as necessary.
makes it easy to replace vehicle components..
【Multi-Application】This high-position jack stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. Ideal for supporting exhaust systems, shock absorbers and other vehicle components during under vehicle repair..

Check Stock

Chamber Wax Pen Red

14000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
Leak-Free Removable Hydraulic Bottle Jack for Easy Replacement.
Reinforced Jack Handle to Add Strength and Durability.
Upgraded Body Frame to Hold Up To 12-Ton Force.
Ergonomic Handle Design Allows You to Move the Press Conveniently.

Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..

Check Stock

VEVOR Bottle Jack 32 T Car Jack Hydraulic Floor Jack 70500LBS with Manual Hand Pump Pneumatic Air Jack Heavy Duty Auto Truck Travel Trailer Repair Lift

Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation..
Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor..
Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use..
Heavy-duty Steel Structure: Made of sturdy metal, this hydraulic bottle jack provides a reliable and strong lifting capacity. In addition, the lacquered surface is rust-proof, not easy to wear. The thick and wide base provides stable support, easily cope with heavy loads..
Diverse Application: This hydraulic bottle jack with ....

Check Stock

Omega Pro Hydraulic Long Ram Jack - 4 Ton Capacity with Flat Base for Auto Garage Shop, Green (OP400S)

4 TON LONG LASTING - Omega Pro OP400S Long Ram Jack features 4 Ton lifting capacity and fabricated from hard-cast steel with heat-treated critical stress areas for long lasting..
VERSITILE – Omega Pro Long Jack has the heat-treated chrome cylinder for added strength and give you the ability to Lift from 19 7/8" to 35 1/4" to allow you to use for almost anything needing to be raised..
DURABLE PERFORMANCE - Hydraulic system is protected from internal damage by a patented by-pass mechanism. Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance..
EASY TO USE – Handle includes a rubber grip & jack uses a large hydraulic release handle. Perfect for lifting (not supporting) auto engines, trailers, RV, patios, decks, ATVs and more..
WARRANTY - 4 ton long jack features a wide rugged base (5-18" x 4 1/2") to allow you with the ability to easily position and provide the stability and strength. It covers with 1 year manufacture warranty from the date of the purchase..

Check Stock

Cat 4 Ton All-in-One Truck Jack, Bottle Jack and Stand in One, Car Lift Equipment for Repair - 240342

INNOVATIVE DESIGN: All in one truck jack is just a portable jack designed to not only lift but safely hold higher vehicles like trucks, SUVs, or offroad vehicles.
eliminates the need for extra jack stands.
will lift and hold both body on frame and unibody vehicles.
PATENTED: The genius of this jack's design is it allows both easy and safe lifting of higher vehicles while making holding them trouble free as well.
the auto safety lock and riser retaining pin hold vehicle at height, eliminates the need for additional jack stands.
LIFT RANGE: Jack has a lift range from 11 inches to 21 inches.
CAPACITY: Jack has a 4 ton (8,000 lbs) lifting and holding capacity.
TRUSTED BRAND: If you are a fan of the big yellow and black machines, you will love the Cat branded 4 Ton All-in-One Truck Jack.

Check Stock