ReviewsLaser Cutting Manufacturer

SCULPFUN S10 Laser Module with Air Assist Nozzle, 10W Optical Power, 20mm Wood 15mm Acrylic Cutting, Faster & Stronger Laser Cutter, Ultra-Fine Compressed Spot, Compatible with Laser Engraving Machine

  • ...le is different because it has an advanced hydrodynamic design that allows for better utilize of air pressure. S10 has a faster jet stream when using the same air assist. For example, when using a 30L/min, 0.03Mpa air assist, the S10 nozzle will eject a high speed airflow of up to 14.5m/s. This will greatly improve cutting penetration and cutting efficiency. (AIR ASSIST NOT INCLUDED, NEED TO BUY SEPARATELY).
  • Faster, Stronger and Cleaner: Combining advanced high-speed air assist and 10W high energy density laser, S10 embodies wood cutting performance comparable to industrial grade: First, cutting efficiency is greatly improved, cutting faster.
  • Second, cutting penetration is stronger, which can cut many high-density wood.
  • Third, cutting surface is cleaner, powerful airflow blows away the residue, leaving the surface of cut objects without any stain..
  • 0.06mm Ultra-Fine Compressed Spot: S10 adopts ultra-fine high energy 10W laser beam shaping technology, 0.06*0.06mm compressed spot enables finer laser engraving. S10 can cut 10mm wood, 5mm acrylic at one pass.
  • Cut 10mm walnut and 6mm MDF and other high density materials.
  • Carving metal, glass, stone, etc. Which means S10 has higher energy density, stronger cutting penetration and engraving capabilities..
Check Stock

Under Siege

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock

SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life

  • ...eds to be manually turned off when engraving, otherwise it will destroy the engraving pattern or text. The S30 series comes standard with a 32-bit air-assist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to mistakes..
  • Powerful 5W Dual Laser Output: The S30 laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 5mm balsa wood and 3mm plywood in 1 pass. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
  • Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to ....
Check Stock

Honeycomb Laser Bed 37.4\x 19.68\x 0.87\

  • ✅✅✅【Soulmate for laser engraver】Nivill honeycomb working table is indispensable part of laser cutting and engraving machines. It helps to extend the life of your laser engraver desktop, make your engravings more precise and improve the quality of your engravings..
  • ✅✅✅【Durable Material & Fast Heat Dissipation】The honeycomb panel is made of steel, making it more stable, durable, and rust-proof. The flat and smooth honeycomb hole design accelerates the emission of smoke so that materials such as wood are not easily blackened by smoke, and the engraving effect is better..
  • ✅✅✅【Multiple Protection】 In laser cutting operation, honeycomb plate is used to prevent laser reflections from damaging the laser head during the cutting process and prolong the service life of the laser. The honeycomb workbench set is equipped with an aluminum panel, which can protect your desk from laser damage. Also come with 4 corner protectors to prevent your hands from being in any potential danger..
  • ✅✅✅【High-Efficiency Engraving & Quick Measurement】 Honeycomb panel can cut wood, acrylic, and other materials, the wood edges are neat and clean, and the 9mm aperture size can be more effectively arranged during the engraving process Smoke, helps t....
Check Stock

Platy for Prezi!

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
Check Stock

TACKLIFE Advanced 6.7 Amp 3000 SPM Jigsaw with Laser & LED, Variable Speed, Carrying Case, 6 Blades, Adjustable Aluminum Base, Pure Copper Motor, 10 Feet Cord - PJS02A

  • Adjustable Function1-6 speeds adjustment and 4 position orbital operation provides control of cut quality and speed.
  • Locking button allows you to lock the speed without constant grip.
  • Versatile ToolAdjustable shoe can 45 bevel cuts both on left and right.
  • 6pcs blades in storage box for straight, diagonal and curve cutting of wood, plastic, metal, aluminum etc.
  • Dust-free MeasureThe blow button can blow away dust or suck into the dust extractor socket.
  • Transparent guard to prevent dust from entering the eye when cutting.
  • Appropriate DesignTool-free blade clamp easy to install and remove blade without auxiliary toolsAnti-skid handle increased comfort and controlDescriptionTacklife - Professional team on Amazon, which deals only with development of the tools..
  • We commit ourselves to using qualitative tools to improve the quality of life..
  • Gear 0 is suitable for cutting wood and plywood..
  • Gear 1 is for small curve, suitable for cutting low carbon steel, aluminum and hard wood..
  • Gear 2 in the curve cutting processing for rapid cutting of aluminum and low carbon steel..
  • Gear 3 is for large curve cutting processing, suitable for fast cutting of wood and plywood..
Check Stock

SCULPFUN S30 Pro 10W Laser Engraver with Auto Air Assist Pump & Nozzle, Cleaner and Faster Laser Cutter, Higher Accuracy Laser Engraving Machine, 10x Service Life, 36.8"x35.6" Expandable Working Area

  • ...eds to be manually turned off when engraving, otherwise it will destroy the engraving pattern or text. The S30 series comes standard with a 32-bit air-assist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to forgetting..
  • Powerful 10W Dual Laser Output: The S30 Pro laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 10mm wood and 5mm black acrylic in 1 pass. Capable of cutting high density materials such as 10mm walnut and 6mm MDF. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
Check Stock

WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather

  • 【Faster Speed & High Accuracy】 Upgraded 20-24W Laser module and 32 bit motherboard support faster cutting and engraving speed. Ultra-fine laser focus is reduced to 0.06 x 0.06mm, provide you a higher accuracy engraving artwork. WIZMAKER laser engraver can cut 10-12mm paulownia wood and 8-10mm acrylic in one pass, and up to 20mm wood, 15mm acrylic, 0.05mm metal steel. Also can directly engrave metal, ceramics, glass, the engraving and cutting speed is 40% higher than the ordinary model..
  • 【Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
  • 【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protectin....
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Engraving Cutting Machine, High Energy Laser Cutter for 15mm Wood, 0.06mm Ultra-Fine Fixed-Focus Compressed Spot, Expandable Area

  • High Energy Cutting & Ultra-Fine Laser Beam – S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp compressed laser focus spot and 0.01mm engraving accuracy. With super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, 10mm plywood, engraving ceramics and stainless steel..
  • Safety Protection Design – Laser filter cover can filter 98% of UV light to protect your eyes, no need to wear goggles to watch laser engraving and prevent pets from catching the laser spot. Equipped with a power switch to easily turn on, or turn off the machine in case of emergency. A4 size steel pad protects the table from laser damage and isolates fire hazards..
  • Extensive Compatibility & Uses – Compatible various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Engraving materials: wood, paper, cardboard, plastic, PCB board, aluminum oxide, stainless steel, ceramic, stone, etc. Cutting material: wood, acrylic, plywood, fabric, bamboo, plastic board, etc..
  • Expandable Engraving Area & Quality Assura....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock