ReviewsLaser Diode Driver

Creality 3D Printer Laser Engraver Module Ender 3 S1 Laser Engraving Kit 5W 24V 455nm Blue-Violet Light, Safety Cover, Fixed Focus, and Soot Absorption for Ender 3 S1, Ender 3 S1 Pro & Ender 3 S1 Plus

• Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality. The 5W high-power engraving speed is faster, and the accuracy is higher..
• Fixed Focus: Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. The unique convenient focusing unit can quickly and accurately fix the focus and make the best engraving effect..
• Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve airflow, all of which contribute to fast and efficient heat dissipation, the built-in air filter cotton can absorb smoke and odor, allowing for prolonged service life..
• Full Protection: Upgraded with a new safety cover that meets FDA Class 4 safety level requirements to prevent laser damage to eyes and skin..
• Compatibility and Application: The laser module is compatible with Ender 3 S1, Ender 3 S1 Pro, and Ender 3 S1 Plus. It can be used to cut cardboard, wood, bamboo, rubber, leather, acrylic, plastic, etc..

Creality 3D Printer Laser Engraver Module Ender 3 Laser Engraving Attachment 1.6W 12V/24V 450nm Blue-Violet Light, Magnetic Design, with Goggles and Wood Pieces, Upgrade for Ender 3/5 Pro, CR-10

• Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
• Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size..
• Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life..
• Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed..
• Compatibility and Application: The laser module is compatible with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo..

SCULPFUN S6 Pro Laser Engraver, 60W Laser Engraving Cutting Machine, 5.5-6W Optical Power Laser Cutter for Metal and Wood, Logo Carving Marking Machine, Gifts for Him (S6 Pro Engraver)

• ▶【Diode Spot Compression Laser】- The S6 Pro laser engraver uses the latest 5.5W diode spot compression laser, which has an ultra-fine square 0.08mm laser focus. With twice cutting penetration and accuracy of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
• ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
• ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
• ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy t....

405nm Violet Blue Purple Laser Dot Diode Module 20mW 13mm x 42mm with US AC Power Adapter

Laser Safety Glasses Eye Protection for IPL/E-light Hair Removal Safety Protective Glasses Universal Goggles Eyewear

• Laser Safety Glasses Protection Scope:200 - 540nm O.D 6+ & 900 - 1100nm O.D 5+.
• Application:2 line Laser ,Alexandrite Laser Safety Glasses, Diode Laser Safety , ND:YAG Laser protection , KTP Laser safety and Q-switched Tattoo Removal Laser Protective.
• Typical laser wavelength：405nm,532nm, 980nm , 1064nm.
• Laser Hair Removal Safety ,Green laser Safety Glasses,Blue Laser safety Glasses,Picosecond laser safety Glasses(blue), UV laser Protection.
• Special for ergonomics, harmlessness, comforts, airing and flexibility.Safety glasses with wrap-around design.Flank with unique ventilation and protection system, protect eyes from splashing all-round..

5pcs 405nm Violet/Blue 5mW Laser Diode 5.6mm TO-18 LD for DIY Laser Module

• 5mw Industrial class 532nm Green Laser Dot Module.

HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560

• L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value.
• Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.
• Dual-channel H-bridge driver working mode creates higher working efficiency.
• To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
• Large capacity filter capacitance, afterflow protection diode, more stable and reliable.

DEWALT Line Laser, Self-Leveling, Red, 3-Beam (DW089K)

• DEWALT laser level has 3-beam line laser to aid in 90-degree layout.
• Laser level tool has 2 times brighter diode to increase visibility in bright job-site conditions.
• Self leveling laser level features built-in magnetic pivot bracket mounts easily on metal surfaces.
• Accurate to approximately 1/8-inch at 30 ft. for level applications.
• 1-button operation and control panel for ease of use.
• Micro adjust knob for precise alignment of 90-degree intersecting lines over greater distances.

Hogue 45080 1911 Gov Model Rubber LE Grip - Red Laser , Black , Fits: 1911 Government Model

• 1911 Government Model Rubber Laser Enhanced Grip with Red Laser.
• Ruggedized 4mm Laser Diode to Withstand Recoil.
• Programmable Micro-Processor for Flashing, Stealth Target or Steady Modes and 4 Levels of Brightness.
• Precision Cut Piranha Grip Textured G10 Grip Panels.

ATOMSTACK A20 Pro 20W Laser Engraver and Cutter, 130W Laser Engraving Cutting Machine with Air Assist Kit and F1 Honeycomb Working Table, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Glass

• Thickest Cuts by 20W Highest Power Diode Laser Engraver and Cutter: ATOMSTACK A20 pro is the World's First Quad-Core Diode laser engraving and cutting machine. 15mm solid wood and 8mm acrylic by single cut.It can even cut 0.05mm stainless steel sheets, wood up to 25mm and acrylic up to 30mm..
• Fastest and Cleaner Cutting: 20W highest power laser, it can cut faster and deeper than other power lasers. Buit in F30 Pro upgraded air assit kit that makes you can enjoy the concise beauty.It can increase laser cutter efficiency to save your time.Quickly and efficiently reduce the surface temperature of objects during the engraving and cutting process, and the edges will be cleaner and clearer..
• More Precise and Multiple Colours Engraving: ATOMSTACK A20 pro laser engraver with a newly upgraded 32-bit motherboard works more smoothly and stable. The advanced built in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieving the finer engraving result and higher contrast effect. The finished pattern is like sketching on paper. The effect is more delicate and natural in the overlay of black and white..
• Meet Your Business Needs: ATOMSTACK A20 PRO configures the touch control panel, support offline engraving. You can carry out engraving work anytime a....

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

• 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
• 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
• 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....