ReviewsLaser Diode For Ps3

Laser Safety Glasses Eye Protection for IPL/E-light Hair Removal Safety Protective Glasses Universal Goggles Eyewear

• Laser Safety Glasses Protection Scope:200 - 540nm O.D 6+ & 900 - 1100nm O.D 5+.
• Application:2 line Laser ,Alexandrite Laser Safety Glasses, Diode Laser Safety , ND:YAG Laser protection , KTP Laser safety and Q-switched Tattoo Removal Laser Protective.
• Typical laser wavelength：405nm,532nm, 980nm , 1064nm.
• Laser Hair Removal Safety ,Green laser Safety Glasses,Blue Laser safety Glasses,Picosecond laser safety Glasses(blue), UV laser Protection.
• Special for ergonomics, harmlessness, comforts, airing and flexibility.Safety glasses with wrap-around design.Flank with unique ventilation and protection system, protect eyes from splashing all-round..

405nm Violet Blue Purple Laser Dot Diode Module 20mW 13mm x 42mm with US AC Power Adapter

DEWALT Line Laser, Self-Leveling, Red, 3-Beam (DW089K)

• DEWALT laser level has 3-beam line laser to aid in 90-degree layout.
• Laser level tool has 2 times brighter diode to increase visibility in bright job-site conditions.
• Self leveling laser level features built-in magnetic pivot bracket mounts easily on metal surfaces.
• Accurate to approximately 1/8-inch at 30 ft. for level applications.
• 1-button operation and control panel for ease of use.
• Micro adjust knob for precise alignment of 90-degree intersecting lines over greater distances.

Hogue 45080 1911 Gov Model Rubber LE Grip - Red Laser , Black , Fits: 1911 Government Model

• 1911 Government Model Rubber Laser Enhanced Grip with Red Laser.
• Ruggedized 4mm Laser Diode to Withstand Recoil.
• Programmable Micro-Processor for Flashing, Stealth Target or Steady Modes and 4 Levels of Brightness.
• Precision Cut Piranha Grip Textured G10 Grip Panels.

5pcs 405nm Violet/Blue 5mW Laser Diode 5.6mm TO-18 LD for DIY Laser Module

• 5mw Industrial class 532nm Green Laser Dot Module.

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

• 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
• 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
• 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....

Fat Beam 60mW 532nm Green Laser Dot Diode Module W/TTL

• √Photo Light Sensitive Resistor: Maximum voltage: 150 Volt DC.
• Operating temperature: - 30 ~ + 70 degree Celsius..
• √Enough quantity: We have 6mm 5V 5mW And 3V 5mW mini laser diode and each value 10pcs and LDR sensor 5 mm GM5539 5539 20pcs. Enough quantity and adequate specification come in handy for your DIY and hand working projects..
• √Coated with epoxy, our LDR resistors feature good reliability, small volume, high sensitivity, quick response and good spectrum characteristic. Our resistors and mini laser diode are manufactured with string quality standard, they are of good quality..
• √Widely used in our daily life: Photoelectric control, camera auto metering, indoor light control, alarm, industrial control, light control switch, light control lights, electronic toys, etc..
• √【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us. We would work out satisfactory solution to all your problems. 12 hours quick response. FREE REPLACEMENT or REFUND within 90days..

BOSCH Laser Level and Square GTL2

• VERSATILE: The Bosch GTL2 Laser Level Square projects horizontal and vertical chalk lines on any surface up to 30-ft.
• VISIBILTY: Bright, sharp, highly visible laser lines to help you square, align and angle at 90° for squaring kitchen tile, bathroom flooring layout, and walls.
• CONVENIENT: Features an alignment guide for 90° layout and calculates and turns angles in 5° increments.
• USER FRIENDLY: Simple one-button operation powers two perpendicular laser lines (90°) on and off, allowing flooring pros to start kitchen tile or bathroom tile layout quickly.
• SECURE: The Bosch GTL2 features an easy-to-press push button that secures the laser tool to smooth surfaces using non-abrasive adhesive, for positing to the surface for a fixed attachment.
• ACCURACY: The Bosch GTL2 provides precision and accuracy up to ±1 2-in at 30-ft while the vials ensure a level tile, so the two laser lines are at an exacting 90° angle.

LaserPair Laser Safety Glasses CE Certified , 800 – 1100nm Absorption Type of Laser Protective Glasses Diode, Nd:yag Laser Protection Glasses Multi Wavelength 808nm, 980nm, 1064nm Laser Light .

• High Transmittance Laser Safety Gasses Protect wavelength: 800-1100nm OD 5+ &1060 - 1070nm OD 7+.
• Used in UV Protection ,invisible laser safety ,Diode Laser Safety, ND:YAG Laser protection.
• Application:Dental Lasers, Diodes Laser , nd:yag laser.
• Europe Certifications:CE Certified by DIN CERTCO Laser Safety Glasses.
• Special for ergonomics, harmlessness, comforts, airing and flexibility.Safety glasses with wrap-around design.Flank with unique ventilation and protection system, protect eyes from splashing all-round..

ATOMSTACK A20 Pro 20W Laser Engraver and Cutter, 130W Laser Engraving Cutting Machine with Air Assist Kit and F1 Honeycomb Working Table, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Glass

• Thickest Cuts by 20W Highest Power Diode Laser Engraver and Cutter: ATOMSTACK A20 pro is the World's First Quad-Core Diode laser engraving and cutting machine. 15mm solid wood and 8mm acrylic by single cut.It can even cut 0.05mm stainless steel sheets, wood up to 25mm and acrylic up to 30mm..
• Fastest and Cleaner Cutting: 20W highest power laser, it can cut faster and deeper than other power lasers. Buit in F30 Pro upgraded air assit kit that makes you can enjoy the concise beauty.It can increase laser cutter efficiency to save your time.Quickly and efficiently reduce the surface temperature of objects during the engraving and cutting process, and the edges will be cleaner and clearer..
• More Precise and Multiple Colours Engraving: ATOMSTACK A20 pro laser engraver with a newly upgraded 32-bit motherboard works more smoothly and stable. The advanced built in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieving the finer engraving result and higher contrast effect. The finished pattern is like sketching on paper. The effect is more delicate and natural in the overlay of black and white..
• Meet Your Business Needs: ATOMSTACK A20 PRO configures the touch control panel, support offline engraving. You can carry out engraving work anytime a....

ATOMSTACK A20 Pro 20W Laser Engraver and Cutter, 130W Laser Engraving Cutting Machine with Air Assist Kit and R3 Rotary Roller,Laser Engraver for Wood and Metal, Vinyl, Acrylic, Glass

• Thickest Cuts by 20W Highest Power Diode Laser Engraver and Cutter: ATOMSTACK A20 pro is the World's First Quad-Core Diode laser engraving and cutting machine. 15mm solid wood and 8mm acrylic by single cut.It can even cut 0.05mm stainless steel sheets, wood up to 25mm and acrylic up to 30mm..
• Fastest and Cleaner Cutting: 20W highest power laser, it can cut faster and deeper than other power lasers. Buit in F30 Pro upgraded air assit kit that makes you can enjoy the concise beauty.It can increase laser cutter efficiency to save your time.Quickly and efficiently reduce the surface temperature of objects during the engraving and cutting process, and the edges will be cleaner and clearer..
• More Precise and Multiple Colours Engraving: ATOMSTACK A20 pro laser engraver with a newly upgraded 32-bit motherboard works more smoothly and stable. The advanced built in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieving the finer engraving result and higher contrast effect. The finished pattern is like sketching on paper. The effect is more delicate and natural in the overlay of black and white..
• Meet Your Business Needs: ATOMSTACK A20 PRO configures the touch control panel, support offline engraving. You can carry out engraving work anytime a....