ReviewsLaser Engraving cutting Machine

ATOMSTACK A5 M50 PRO Laser Engraver, 40W Laser Cutter with Offline Engraving, Laser Engraving Machine with APP Operate Fuction, 5.5W-6W Output Power, 410x400mm

  • ...o contact with the seller to get the APP manual and help for updating the firmware..
  • 【Upgraded Compression Laser Beam】The laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. The high-density laser can easily cut 15mm light wooden boards, 12mm acrylic.The newly compression laser beam engraving speed is 60% faster than ordinary laser..
  • 【Eye-protection Flame-retardant Filter Panoramic Glass】The engraving machine is equppied with the fliter glass can prevent eye burns, and eliminate the hidden danger of acrylic being easily burned. You can also clearly watch laser engraving but you do not need to wear goggles. Thus not only reduces the cost of the goggles, but also makes engraving safer..
  • 【Intelligent Protection Design & Emergency Button】Limit switches are installed on both X-axis and Y-axis. At the maximum stroke of the laser cutter machine, the limit switch is automatically triggered to protect the laser and avoid collisions. The laser engraver will stop working immediately after pressing the emergency button to make engraving safer. Equipped with an all-aluminum alloy anodized structur....
Check Stock

ATOMSTACK X30 PRO Laser Engraver, 160W DIY CNC Laser Engraving Cutting Machine, 6-core Diode 33W Laser Power for Wood, Vinyl and Metal, Offline Engraving, Built-in F30 Pro Upgraded Air Assist System

  • 【Ultra-high Power】the World's First 33W Laser power output laser engraving machine. The latest 6*6W laser coupling technology, can cut 20mm wood board, 10mm black acrylic board at one pass, and even can cut 0.1mm stainless steel sheet. High density laser multiple times work can easily cut 25mm thick wood board, 30mm thick black acrylic.
  • can directly engrave mirror stainless steel metal, ceramics, opaque glass and other materials..
  • 【High efficiency】Compared with 10W laser engraving machine, X30 Pro has 200% higher cutting speed and 150% higher cutting depth. Compared with 20W laser engraving machine, X30 Pro has 50% higher cutting speed and 25% higher cutting depth..
  • 【Equipped with F30 Pro upgraded air-assist kit】the cutting capacity is greatly improved while the cutting accuracy and cutting quality can also be optimized to a great extent..
  • 【Newly upgraded Atomstack self-research 32-bit motherboard】built-in 256-bit color scale map, so that the engraving works more fine, higher contrast, so that your engraving is not just black..
Check Stock

SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life

  • Automatic Air Assist System: Other air assist needs to be manually turned off when engraving, otherwise it will destroy the engraving pattern or text. The S30 series comes standard with a 32-bit air-assist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to mistakes..
  • Powerful 5W Dual Laser Output: The S30 laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 5mm balsa wood and 3mm plywood in 1 pass. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
  • Smooth Edge & Deeper Cutting: Use air to quickly redu....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

SCULPFUN Laser Cutting Honeycomb Working Table Board for CO2 or Diode Laser Engraver Cutting Machine, for Slight Burnt & Smooth Edge Cutting, Visible Cut-Through, Table-Protecting, 300x200mm

  • Necessary Accessories for Laser Cutting: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work..
  • Cutting Through Observable Design: We add 4 height increase pads for easy view. When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through..
  • High Quality Full-Metal Structure：SCULPFUN honeycomb table is made of metal, processed by high-precision CNC, it’s strong, stable, rust-proof, durable and high flatness..
  • Safe Metal Pad & Precise Scale Lines: Comes with a metal pad to protect the table from laser damage. A right angle measuring scale on the X and Y axes allows easy and quick measurement of the cutting object..
  • Wide Compatibility: Compatible with various laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine..
Check Stock

SCULPFUN S9 Laser Engraver, Full-Metal CNC Laser Engraving Machine with 5.5W High Precision 0.06mm Ultra-Thin Beam Diode Laser Cutter for Wood, Leather, Acrylic, Large Engraving Area 410x420mm

  • 【Fast Focusing and High Accurancy】With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of SCULPFUN S9 laser engraver machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • 【Security and Protection Designs】The laser filter cover of SCULPFUN S9 laser engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • 【Sturdy and Easy to Assemble】The all-metal structure design makes the desktop SCULPFUN S9 laser cutter more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • 【Widely Compatibility】The S9 laser cutter and engraver machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows/MAC ....
Check Stock

ATOMSTACK S20 PRO Laser Engraver,130W Laser Engraving Cutting Machine Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine Metal Steel Golden Gray

  • More Powerful Engraving: ATOMSTACK S20 PRO is the first 130W semiconductor laser engraving machine. It uses the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board..
  • More Precise Engraving: ATOMSTACK laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area MAKEs the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more deliCATe and natural in the overlay of black and white..
  • More IntelLIGEnt Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer..
  • More Clean Engraving: The S20 PRO laser engraver is equipped with an upgraded F30 pro air assist kit, which have dual built-in....
Check Stock

ATOMSTACK A5 Pro Laser Cutter and Engraver Machine, Engraving Cutting Maker with Eye Protection, Output Power 5.5W for Wood Acrylic Metal Leather, 400x410mm

  • New eye protection design:The laser protective cover perfectly protect your eyes,filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles..
  • Solid and easy installation structure design:The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes..
  • Upgraded high-performance fixed-focus laser: no need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc..
  • Precise scale lines axis :There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large....
Check Stock

ATOMSTACK S20 PRO Laser Engraver with R3 Pro Rotary Roller Kits, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot for Metal Steel

  • More Powerful Engraving: Atomstack S20 PRO is the first 130W semiconductor laser engraving machine. It uses the newest generation of four 6W laser coupling technology to produce the output power soars to 20W. It can cut 15mm thick tung wood board and 8mm thick black acrylic board at one pass and easily cut more than 40 kinds of materials such as 0.05mm thick stainless steel board..
  • More Precise Engraving: Atomstack laser engraver with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
  • More Intelligent Engraving: We have developed an ATOMSTACK APP to connect to the S20 pro laser engraving machine, supporting Android and Apple mobile phone systems. At the same time, It is equipped with a controller and emergency stop button, so that completely offline engraving can be achieved. You can do your engraving work smoothly and safely even without network environment or computer..
  • More Clean Engraving: The S20 PRO laser engraver is equipped with an upgraded F30 pro air assist kit, which have dual built-in....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

  • ...CB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks produci....
Check Stock

ATOMSTACK Honeycomb Working Table F1 for Laser Engraving and Cutting Machine, Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting, Compatible with All Laser Cutter,380x284x22mm

  • ...mb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. It is very suitable for various styles. CO2 or diode laser engraving machine..
  • Anti-slip metal clamps for fixing:This laser cutting honeycomb table is all made of metal, high-precision CNC processing, and it has fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming..
  • Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature..
  • Cutting Through Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb table will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through.You don't need....
Check Stock