ReviewsLaser Sight For Sd40ve

ArmaLaser TR15 Designed to fit Smith Wesson Sigma SW9VE SW40VE Red Laser Sight with Grip Activation

  • Extremely bright 635nm Red Laser with grip activation. Just grasp pistol normally to turn laser on..
  • Custom designed to fit Smith and Wesson Sigma series. Will not fit newer SD9VE and SD40VE..
  • 635nm red laser, considerably brighter than 650nm lasers. Class 3R 635nm .
  • Adjustable laser, battery door, master kill switch. Made from DuPont Zytel polymer pistol material..
  • Designed, assembled in Florida, USA. Patented. Holster, accessories. Ultra reliable electronics. Simple installation. Class 3R Laser Product (Does not exceed Class IIIA emission limits), .
Check Stock

Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield Pistol and Also a Standard Picatinny Mount

  • Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shied.
  • The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, SW40, SW9, Sigma, 1911.
  • 1.75″ length x1.25″ width x1.15″ height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click.
  • The red dot is also compatible with Ade handguIt is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.
  • Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate..
Check Stock

MP Holster Fit Smith & Wesson M&P 9mm/40 Full Size, S&W M&P 9mm/.40 M2.0(Not for Shield 9mm), OWB Open Carry Gun Holster for S&W SD9 VE/SD40 VE, Outside Waistband Paddle Holster - Right Hand

  • Fit Gun Models: This OWB paddle holster fits Smith & Wesson M&P 9mm/.40 Full size, S&W M&P 9mm M2.0.
  • Girsan MC 28 SA 9mm - Right Handed(NOTE: Doesn't fit S&W SW9/.40VE.
  • S&W M&P Shield or guns with laser/light or Suppressor height sight).
  • AUTO-Locking: This M P 9mm Holster has an integrated auto-locking mechanism that will automatically lock and hold your firearm safely when you put it back in this open belt carry gun holster..
  • New Design: What you've got with the low-cut design? Full access to the grip and quick draw with the "Ergonomic-level" release button as well as put your weapon back in this OWB paddle holster much easier. It's the ideal holster for the range shooting or tactical shooting competitions..
  • Adjustable Carrying Angle: This tactical gun holster for Smith & Wesson M&P is 360 degrees adjustable with the Allen Key (included). Simply rotating the paddle to get your desired carry angle. And with the paddle, it allows you to attach on and remove this gun holster from your pants or belt in width up to 2"..
  • Durability: Our outside waistband holsters are made of durable, lightweight polymer material that is resistant to impact, heat and scratch. It's designed for tactical training, hunting, military, the range, law enforcement....
Check Stock

Ade Advanced Optics Mini RD3-006x Green Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield SD9VE,SD40VE Pistol and Also a Standard Picatinny Mount

  • Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield.
  • The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911..
  • We have made several improvements for thi RD3-006X since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 3 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included). The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
Check Stock

ArmaLaser TR31G Designed to fit S&W Smith and Wesson SD9VE and SD40VE Ultra Bright Green Laser Sight with Grip Activation

  • Grip Activation: Grasp pistol normally to turn laser on..
  • Custom designed to fit the S&W Smith and Wesson SD9VE and SD40VE.
  • Excellent for daytime use. Class 3R 520nm .
  • Adjustable laser, battery door, master kill switch..
  • Designed, assembled in Florida, USA. Patented. Ultra reliable electronics. Simple installation. Class 3R Laser Product (Does not exceed Class IIIA emission limits), .
Check Stock

Holster with Mag Pouch for S&W SD9VE, SW9VE, SD40VE, SW40VE with Underbarrel Laser Mounted on Gun

  • For laser only - Will Not Fit Tactical Lights or Combos.
  • Ambidextrous - Extra Magazine Pouch on Front Seam.
Check Stock

BASTION Laser Engraved Rear Cover Slide Back Plate for Smith & Wesson SD9VE, SD9, SD40VE, SD40. 9mm & .40 Cal Skull

  • Fits Smith & Wesson SD9 VE, SD9, SD40 VE, and SD40.
  • Replaces factory part with durable aluminum custom slide plate.
  • Made from black-anodized, hard-coat 6061 T6 aircraft billet aluminum.
  • This is a permanently lasered item, this is not painted on.
Check Stock

Laser Engraved Aluminum Rear Cover Slide Back Butt Plate for Smith & Wesson SD9/SD40/SD9VE/SD40VE 9mm & .40 Cal, US Flag

  • Fits for Models SD9 VE, SD9, SD40 VE, and SD40..
  • Use Laser Engraved this artwork so that it won't rub off or wear off over time..
  • Black, The color is similar to the original slide cover..
  • 0.17ounces ONLY, will not affect the control of the pistol..
Check Stock

BASTION Laser Engraved Rear Cover Slide Back Plate for Smith & Wesson SD9VE, SD9, SD40VE, SD40. 9mm & .40 Cal - Psalm 23:4

  • Fits Smith & Wesson SD9 VE, SD9, SD40 VE, and SD40.
  • Replaces factory part with durable aluminum custom slide plate.
  • Made from black-anodized, hard-coat 6061 T6 aircraft billet aluminum.
  • This is a permanently lasered item, this is not painted on.
Check Stock

Ade Advanced Optics SW MP Tactical Mini Dotx Sight Pistol Mount Base for Smith & Wesson M&P

  • This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith & Wesson handguns.
  • This mounting plate fits SW Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield.
  • This mounting plate does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma.
  • This mounting plate fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..
Check Stock

SD9VE & SD40VE Holster, OWB Holster Fit: Smith & Wesson SD9 VE & SD40 VE Pistol,Outside Waistband Carry Paddle Holster. Level II Retention with Index Finger Release, Right Hand Adjustable Cant

  • Precision Molding Open Carry Holster: Tailor-made holster for Smith & Wesson SD9 VE & SD40 VE. Our Injection Molding System makes sure that each of our holsters is not only precise , but also durable and sturdy..
  • PLEASE NOTE: This Smith & Wesson SD9 VE & SD40 VE holster will not fit any laser/light accessories..
  • Level II Retention System: Level II Retention with Index Finger Release System, means your weapon will stay in the holster without any chance of falling out unless you press the release button to make your smooth draw. Perfect for law enforcement and personal use..
  • 360-Degree Adjustable ：This paddle will fit a 1.5’’, 1.75’’, 2.0’’ wide belt.It is 360 degrees adjustable with an Allen Key provided, allowing you to angle the holster perfectly for Appendix, On Hip, behind hip or cross draw..
  • ‘POSI-CLICK’ Locking Feedback: This SD9 VE holster provides locking feedback with a crisp clicking sound when the weapon is securely in the holster..
Check Stock