ReviewsLathe Machine Accessories

Mini Lathe Beads Polisher Machine DIY Machining for Table Woodworking Power Wood Tool Lathe Set Grinding (Black)

【Widely Used DIY Hobbies】Great used for the both indoor and outdoor DIY enthusiasts.
【Adjustable 7 Power Levels】This mini beads lathe machine can adjust the rotating speed using the 7 power levels adapter to meet different cutting need..
【High Quality Material】Machine base: Durable aluminum alloy. Drill chuck: High-quality pure steel..
【Multi-functional Lathe Machine】The mini lathe suitable for polishing beads,turn holepearl, cutting jade, plastic,turning wood home woodworking. not suitable for mass production or commercial use..
【All Copper Motor】Strong cutting power and lower noise and Low energy consumption. Rotating speed range: 5000-10000 RPM..

Check Stock

Woodturning

...ruction: The mini lathe is made of high-quality HT200 cast iron, which stands up to tear and wear. It is equipped with an 850W motor that delivers a great deal of energy. If you are into making models, it would be your punctilious assistant..
Infinitely Variable Speeds: Revolving Speed Range: 50-2500. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case..
Works with Precision: Spindle Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..

Check Stock

Threading & Tapping attachment-lathe tailstock die holder set MT3

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....

Check Stock

Machinery Repairman

Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection..
Infinitely Variable Speeds: Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. Emergency stop buttom included..
Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasi....

Check Stock

BestEquip Metal Lathe 7\ x 14\

Sturdy Aluminium Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, sturdy, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splash guard provides max. protection..
Infinitely Variable Speeds: Spindle speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included..
Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004" / 0.01 mm..
Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts pro....

Check Stock

VEVOR Metal Lathe 7\x12\

Sturdy Iron Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection..
Infinitely Variable Speeds: Spindle Speed from 0-2250 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included..
Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision....

Check Stock

Mophorn Metal Lathe 7\ x 12\

Sturdy Metal Construction: The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection..
Infinitely Variable Speeds: Variable speed from 50-2500 RPM. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included..
Accurate 3-jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precis....

Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..

Check Stock

Mophorn Lathe Chuck 4inch “C” Series Chuck Self-centering Lathe Chuck Independent 4 Jaws Mini Lathe Chuck Wood Lathe Bowl Chuck for Woodworking Chuck

...iderate Design: Chuck diameter: 4 inch / 100 mm compact structure is easy for you to carry, store and operate. We give a universal adapter as a gift for kinds of countries to use, and the precise thread inside and texture outside make the whole looks more pretty..
Complete Accessories: Includes screw chuck stud. It also includes an T-shaped Allen wrench and a set of tightening levers, which give a great help to chuck installation and removal..
Wide Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..

Check Stock

8mm Shank Stainless Steel Rotary Center Dead Center for Mini Lathe - Lathe Tool Live Center -1 x Stainless Steel Dead Center

Lathe Tool Live Center - Can be used for mini lathe machine..
8mm Shank Stainless Steel Rotary Center Dead Center for Mini Lathe - Lathe Tool Live Center -1 x Stainless Steel Dead Center.

Check Stock

VEVOR Mini Metal Lathe 8\x14\

...ear and wear. It is equipped with a 650W motor that delivers a great deal of energy. If you are into making models, it would be your professional assistant who has precise metric graduations and metal gears and therefore is punctilious..
Infinitely Variable Speeds: Revolving Speed Range: 50-2250±10%. The mini lathe machine comes with variable speeds that give you the convenience to achieve the best work. This lathe allows you to work on both forward or reverse of any possible speed. The feeding rate can be adjusted manually or automatically. And an emergency button is accessible just in case..
Works With Precision: Spindle Bore: 0.8"/21 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 3.9"/100 mm in diameter, which clamps raw materials tight, and a backsplash guard that ensures your safety during operation..
Faster & More Effective: Swing Over Bed: 8.3"/210 mm.
Swing Over Cross Slide: 13.8"/350 mm. The small metal lathe features a turret post for quick tool change and a cross slide for free blade moving, making internal cutting, face cutting and bevel cutting possible..
Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..

Check Stock