ReviewsLathes And Accessories

Wood Brad Point Drill Bit Set 1/8 in. Spur Point Stubby Woodworking Twist Drill Bits-10Pcs

✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

Check Stock

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.

Check Stock

Carbide Boring Bar, SHB25-12 Φ12MM Small Hole Inner Hole Turning Tool, Holdingers Φ12MM SHB25‑12, Premium Tungsten Steel Material, Compact and Lightweight

High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
Fine workmanship, compact and lightweight lathes tools, easy to operate..

Check Stock

Woodcut Tools Bowlsaver Complete System with Two Blades for Coring Bowl Blanks 3 to 12 on Woodturning Lathe BSVR

SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on....
SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one....
LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has....
PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove....
USER GUIDES, TEMPLATE & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Bowlsaver. User guide, set up and....

Check Stock

WFLNHB Live Center 2MT 60 Degree Lathe Medium Duty Live Tailstock Center for Wood & Metal Lathe CNC Work

Specification: #2 Morse Taper (2MT) shank, 60-degree point, 5000 Max RPM, 600 lbs max workpiece weight, runout of 0.0004in/0.01mm T.I.R..
Material: The live revolving center is made of precision ground hardened steel, hardened to 61-65HRC, with high rigidity and wears resistance.
Triple Bearing Design: The 2MT activity center adopts a combination of a thrust ball bearing and two ball bearings for stable and smooth rotation.
Seal Ring: There is a seal ring at the front gland to prevent the entry of cutting fluid and dust.
Application: The live center MT2 is specially designed for lathes under medium-speed and medium-load environments. It can be used for high-speed turning and is suitable for CNC lathes.

Check Stock

TM-2 Jewelry Rock Polishing Buffer Machine Bench Lathe Polisher Kit Rock Tumbler Gem Tools Grinder 350W 110V

Because of the higher maximum speed (approximately 8500 RPM to 10000RPM) and variable speed control, the Tm Bench Grinder has severa advantages over conventional single or two speed polishing and buffing lathes.
You have purchased a fine quality power tool which will perform a wide variety of tasks difficult to do with any other kind of power tool..
TM Power Tools are manufactured to high standards of precision and performance and, with proper use and maintenance, will give you years of trouble-free performance.
The Jewelry Buffer is designed to burnish and polish jewelry metals, stone, glass .The two tapered spindles attach to the 1/4" motor shafts and accomodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter..
Package included:1 x Jewelry Rock Polishing Buffer Machine Kit,Some Polishing Accessories (Show as picture).

Check Stock

LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)

【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..

Check Stock

Linear Guide Rail 2 X HGR 20-1000mm Linear Slide Rail + 4 X Bearing Blocks Linear Guideway Rail for DIY CNC Routers Lathes Mills

HGR20 1000mm Linear Guideway Rails: Rail width 20mm, Rail Length 1000mm..
HGR20 Linear Rails Advantages: Helps to build economical linear guiding system and designed to achieve high precision linear motion, low friction coefficient. 4 bearing pillow blocks with smooth sliding..
High-Quality Material and Long Service Life: Linear bearing rails made of quality bearing steel. Beautiful and anti-rust surface treatment ensures durability, high hardness, and stiffness..
Easy to Assemble: Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, less effort for maintenance..
Wide Application: Grinding machine, milling machines, lathes, drilling machine, and comprehensive processing machines, discharge manufacturing machine, boring machine, line cutting machine, precise measurement instrument, woodworking machinery, handling machine, shipping device, DIY CNC routers lathes mills, and more automated machines and equipments..

Check Stock

Max-Craft 5/32 -Inch 10Pcs Brad Point Wood Drill Bit Brad and Spur Point Wood Drills with Special Brad-Point tip Drilling for Hardwood or Softwood 5/32-10pcs

✔️WOOD BRAD POIINT DRILL SIZE: 5/32" (Diameter) x 2-61/64"(Flute Length) x 2-23/64"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

Check Stock

FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)

... wrench to quickly change the replacement jaw,allowing you to focus on your creation without tedious steps..
【WIDE RANGE OF APPLICATION】- FJL FORCE 4In lathe chuck is suitable for daily workpiece production,spindle and other large wood lathe projects,with 1'' x 8TPI to 3/4" x 16TPI adapter can be used in general lathes,grinders,milling machines and most wood lathe general lathes and industrial machinery lathes on the market..

Check Stock

PNBO 5inch Wood Lathe Chuck, 4-Jaw Wood Lathe Chuck Set, Wood turning Chuck with M33 1inchx8TPI Thread Lathe Chucks Set Self-centering Chuck

【APPLICATION】: Removable chuck perfect for holding bowls, spindles, and other unwieldy lathe projects..
【FREE ACCESSORIES】: Includes a set of installation tools, a wood screw, a Spindle adapter 1"x8TPI to M33*3.5 for compatibility with the majority of wood lathes on the market..
【HIGH QUALITY】: The chuck is made of high quality steel material. Significantly improve its service life..
【APPLICABLE WORKPIECE SIZE】: Round claw clamping range:2"/55mm-4"/100mm.Round claw support range:2.8"/71mm-4.8"/121mm..
【HIGH PERFORMANCE 4 JAWS】: Each jaw can be adjusted to center with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized..

Check Stock