ReviewsLayer Pcb Borad

CIY GK68 Dual Mode Wireless Hotswap Keyboard Kit, DIY 65% Keyboard, Bluetooth 5.0/2.4G Wireless, Replaceable MX Switch 5Pin/3Pin, ABS Shell,Metal Positioning Plate, Sound Insulation Mat(Black Hyaline)

  • Freely match keycap switches: CIY65% wireless keyboard kit, switch hot-swappable shaft base, you can match any switch and keycap at will, DIY your favorite keyboard!.
  • Two wireless modes: Using the classic dry battery life plan, Bluetooth 5.0 and 2.4G wireless technology, two AAA batteries can last up to two months, while supporting smart sleep power saving mode..
  • Switch hotswap: Switch hot-swappable shaft seat, unique design patent, combined with double-layer thick PCB panel, bring longer mating cycle life..
  • Full configuration: ABS one-piece shell, strong hardness, metal positioning plate, sandwich sound-proof silicone, bottom silencing cotton, thick double-layer PCB panel, all are the top configuration, it is the best choice for your keyboard DIY!.
  • Note: When installing the switch, please check that the pins of the switch are not bent. When installing, you need to insert the hot-swap shaft seat vertically. Please refer to the video of switch installation requirements..
Check Stock

hobbyworker The Rectangle Beading Board/Mat/Tray,Velvet Like Work Surface,Beads Organizer,Bead Wrangler for Jewelry Making,Jewellery Crafts Easy Fine Work

  • ┃BEAD BOARD┃: High quality sponge jewel beading mat bead tray with added foam layer, bumper is cushioned and covered with high quality material. The bead board base is made of wood, the bottom is covered with coarse felt material, and the anti-slip pad design is added, which is convenient and durable..
  • ┃WARM TIPS┃: Everything on the picture is for display purposes only and is not included in this product..
  • ┃USE┃: Beading borad can be used as a workbench, even if you want to beading on your legs. Because it is sturdy, thick and stable, it can be used anytime, anywhere. We use Chinese red flocking cloth, which is not only bright and durable, but also very resistant to dirt, and feels delicate, smooth and soft, which improves the experience and fun of beading to a certain extent!.
  • ┃FOR GIFT┃: The beading mat can not only be used as a beading workbench, but also can be used as a gift for mothers, daughters, relatives, friends on some special festivals, and even organize a diy handicraft club to invite friends who love handmade jewelry making together , which is also a great idea!.
Check Stock

Ducky One 2 Mini Pure White - RGB LED 60% Double Shot PBT Mechanical Keyboard (Kailh Box Thick Jade)

  • Featuring Ducky's all new QUACK Mechanics design philosophy.
  • Dual layer Hot-swap PCB w/ exclusive Kailh yellow hotswap sockets.
  • Low profile One 3 case design in a wide array of exclusive color options.
  • Equipped with dual-layer high-grade silicone and EVA foam sound dampeners.
Check Stock

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • ...action to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding around on your workbench, even protect the work surface against scratches and scuffs. NOTE: Due to different manufacturers’ production batches, the iron plate may also be updated at any time(eg with holes or engraved LOGO). Under normal circumstances, it will not affect your normal use..
  • Widely Used & Service: Helping hands soldering for any electronic, welding, crafting, painting, figurine and hobby work, or any precision project that requires extreme accurac....
Check Stock

Replacement Remap Borad FPC Ribbon Cable for PS4 Controller eXtremeRate Dawn Remap Kit

  • Only compatible with PS4 eXtremeRate controller DAWN remap kit (Gen 1, Gen 2).
  • Replace your damaged eXtremeRate DAWN remap borad.
  • Only compatible with PS4 controller eXtremeRate DAWN remap kit.
Check Stock

CoolerMaster MASTERACCESSORY Riser Cable PCIe 4.0 x16 - 300mm, PCIe 4.0 Compatible, EMI Shielded 30 AWG, Protective ABS Casing for Graphics Card

  • PCIe 4.0 Compatible: While providing twice the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backwards compatible with a maximum transfer rate of over 64Gb/s (bi-directional) and fully supports the 16GT/s bit rate of PCIe 4.0 devices..
  • Ultra Durable PCB: The multi-layer coated PCB provides best-in-class performance under high thermal loads, cable flex, and moisture resistance..
  • Heavy Duty Shielding: EMI shielded 30 AWG tinned copper wires ensure minimal signal delay and electromagnetic interference-free operation..
  • Gold-Plated Pin Connections: Gold-plated PCI pins allow maximum durability with a rated 400g of retention force per contact pair..
  • Protective ABS Casing: UV resistant ABS casing protects cable connection points from rough handling..
Check Stock

MKS Gen L V2.1 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard

  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable..
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS..
  • TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently..
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
Check Stock

Ducky One 3 Mini Aura Clear White 60% Hotswap RGB LED Double Shot PBT Mechanical Keyboard Cherry MX Silent Red

  • Featuring Ducky's all new QUACK Mechanics design philosophy.
  • Dual layer hotswap PCB w/ exclusive Kailh yellow hotswap sockets.
  • Equipped with dual-layer high-grade silicone and EVA foam sound dampeners.
  • Thick PBT Double Shot AC-style keycaps (translucent sides with opaque tops and white legends).
Check Stock

MSI MPG Z690 Edge WiFi Gaming Motherboard (ATX, 12th Gen Intel Core, LGA 1700 Socket, DDR5, PCIe 5, 2.5G LAN, M.2 Slots, Wi-Fi 6E)

  • Supports 12th Gen Intel Core Pentium Celeron processors for LGA 1700 socket.
  • Premium Thermal Solution: Aluminum cover with heatsink, heat-pipe, MOSFET thermal pads rated for 7W/mk, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience.
  • MYSTIC LIGHT: 16.8 million colors / fancy lighting effects controlled in one click. MYSTIC LIGHT SYNC supports RGB and RAINBOW(ARGB) LED strips and Ambient devices.
  • High Quality PCB: 6-layer PCB made by 2oz thickened copper and server grade level material.
Check Stock

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

MSI PRO Z790-A WiFi ProSeries Motherboard (Supports 12th/13th Gen Intel Processors, LGA 1700, DDR5, PCIe 5.0, M.2, 2.5Gbps LAN, USB 3.2 Gen2, Wi-Fi 6E, ATX)

  • Supports 12th/13th Gen Intel Core, Pentium Gold, and Celeron Processors.
  • Supports DDR5 Memory, up to 7200+(OC) MHz.
  • Enhanced Power Design: 16+1+1 DRPS with 80A SPS, dual 8-pin CPU power connectors, Core Boost, Memory Boost.
  • Premium Thermal Solution: Extended Heatsink, MOSFET thermal pads rated for 7W/mK, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience.
  • High Quality PCB: 6-layer PCB made by 2oz thickened copper and server grade level material.
Check Stock