ReviewsLead Screw Jack

UGREEN 3.5mm Headphone Extension Cable Right Angle Aux Extender Stereo Jack Male to Female Earphone Lead Nylon Cord Compatible with Smart TV, Car Radio, PC, MacBook, Speaker, MP3 Player, Phone, 6FT

  • ...on Cable is meant to extend the distance between your auxiliary audio devices and deliver music to a high-end audio output device, such as smart TV to Bluetooth headphones/home Hi-Fi system, cell phone to speaker/car stereo radio, laptop to headphone/amplifier, etc..
  • Protect Aux Port: The Headphone Aux Jack Extender Lead expands a female aux jack to your valuable auxiliary devices like smartphones, laptops, TV. Using the female aux jack of this headphone extension lead is good to protect the audio jack on your devices against repeat plugging and unplugging and extend their lifespan..
  • Stereo Sound Quality: 3.5mm Male to Female Extension Cable is well constructed and offers a remarkable stereo sound experience to you. The professional Aux Jack Lead is a combination of enameled copper conductors, 24K gold-plated connectors, and double shieldings(TPE jacket plus nylon braid). The solid shieldings protect the audio against RF, EM, and ground loop interference during transmission and provide noise-free and ultra-clear sound quality..
  • Enhanced Durability: Manufactured by evolved braided nylon, Nylon Braided Aux Mini Jack Lead passes 10000+ bend tests and is strong enough to withstand any twist, tug, and tangle. Oxygen-free copper provides maximum conductivity ....
Check Stock

ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)

  • ...max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
  • √Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
  • Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
  • √SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use..
  • √MATCH MOST VEHICLES:The electric jack kit 's two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows any adult to change and repair tires at any time on the garage/highway,best choice for your car, truck or SUV.....
Check Stock

HAWKUNG 2pcs 350mm 8mm T8 Stainless Steel Threaded Rod Lead Screw with T8 Nut for 3D Printer Machine Z Axis

  • Packing list: 2pcs 400mm 8mm T8 Stainless Steel Threaded Rod.
  • Lead Screw Length: 400mm,Lead of thread: 8mm.
  • Lead Screw diameter: 8mm,Lead Screw spacing: 2mm.Stainless steel material, not rust, durable, easy to install and convenient to use,no need to process..
Check Stock

2PCS 400mm（15.75 Inches）Tr8x2 Lead Screw with T8 Brass Nut (Acme Thread, 2mm Pitch, 1 Start, 2mm Lead) for LCD DLP SLA 3D Printer Z Axis and CNC Machine

  • Material: SUS304 Stainless steel lead screw + copper nut.
  • Lead Screw Length: 400mm,Lead of thread: 8mm.
  • Lead Screw diameter: 8mm,Lead Screw spacing: 2mm.
  • Thread: Acme thread,Copper nut:with 4 holes for fixing to the machine ..
  • WHAT YOU GET: 2pcs 400mm Tr8x2 Lead Screw With T8 Brass Nut. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

DC Motor Reverable Threaded Output Shaft Lead Screw 6V Motor Stepper Lead Screw Actuator Gear Motor with Long M3*55MM Lead Screw Thread Output Shaft (6V 30RPM)

  • Material: Stainless steel lead screw + copper nut.
  • Lead Screw Length: 350mm,Lead of thread: 8mm.
  • Lead Screw diameter: 8mm,Lead Screw spacing: 2mm.
  • Stainless steel material, not rust, durable..
  • Easy to install and convenient to use,no need to process..
Check Stock

DAYKIT 10 Pairs 12V Male+Female 2.1x5.5MM DC Power Jack Plug Adapter Connector for CCTV Camera

  • Premium Quality: Envirmental PVC+ Pure copper Inner Wire.Heavy Duty Pure copper Inner Wire leads and Connecting Portion can handle Up to 5A Current 1-36V, No Heat..
  • Easy Installation: No electrical tap, No splicing, no crimping, but only a small screw driver.Super Tight Screw on Terminal can Handle 16-26 AWG Gauge Wire..
  • DC Power Plug with plastic construction, Double Layer (Injection Moulding) Provide Best Polarity Connection and Insulation DC Electrical Connector connect wire lead end to a DC 2.1x5.5mm port..
  • Simply & Professional appearance for power cabling.It is a perfect solution for those who want to make custom power cable. Easier for CCTV camera installation, save time and more securer cable connection..
  • Application: For 1-36 Volt Power Supply, 2.1 x 5.5 mm Connectors, CCTV Cable Connection, Led Strip Extention, DIY Board , Security Tailgat Camera, Video Balun. Best choice for LED strip lights, CCTV Camera, Audio & Video connection..
  • Quantity: 10 PAIRS 12V Male+Female 2.1x5.5MM DC Power Jack Plug Adapter barrel Connector.
Check Stock

QWORK 2 Pack T8 600mm Lead Screw and Brass Nut (Acme Thread, 4 Starts, 2mm Pitch, 8mm Lead) Used in 3D Printer

  • 304 Stainless steel lead screw + Brass Nut..
  • T8 brass nut, with 4 holes to fix to the machine.
  • Lead Screw Length - 600mm, Lead Screw diameter - 8mm, Lead Screw spacing - 2mm..
  • Suitable for 3D Printer, stepper motor, machine tools, and other equipment..
  • Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us..
Check Stock

K Tool International 22 Ton Blue Air Hydraulic Truck Jack Welded Pump Wiper Seal on Ram 3 Adaptors Air Pressure 100-120 PSI KTI63197

  • [22-TON CAPACITY] - K tool International hydraulic jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 8 2/3".
  • [WIPER SEAL] - Wiper seal on the ram for longer life in extreme environments.
  • [RELEASE KNOB] - Release Knob At the Top of the T Handle Works At Any Handle Position. 3 handle positions allows for easy storage and jack positioning.
  • [STRONG/DURABLE] - Heavy duty truck jack has a welded pump and reservoir for added strength and durability. Heat treated extension screw for extra....
Check Stock

BIQU 300mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ☘️【Material】Our stainless steel adopt high quality stainless steel, this lead screw is rust and corrosive resistant, durable and stable..
  • ☘️【Smooth Movement】It has low friction that helps the nut move smoothly on the lead screw. It also helps the lead screw work precise and accurate..
  • ☘️【T8 Brass Nut】 There are 4 holes on the T8 brass nut which can easy to fix to the machine..
  • ☘️【Bearing Pillow Block】Bearing Pillow Block have a certain bearing capacity, can hold in ordinary precision rack, strong adaptability, and widely applied..
  • ☘️【Widely Usage】 T8 lead screw can cover a wide usage in 3D printer, stepper motor and CNC 3D engraving machine and other DIY kit..
Check Stock

Poyiccot 3.5mm Speaker Wire Adapter, 3.5mm (1/8") 4 Pole Stereo TRRS Male Jack to AV 4 Screw Terminal Block Balun Connectors Cable 30cm (3.5mm M/ 4pin)

  • Speaker Wire to 3.5mm Cable with Connectors 1: 3.5mm 1/8" TRRS (4-Pole) Male jack, Connectors 2: AV 4-Pin Screw Terminal Block jack,please note: Did not when when attached to wifi projector.
  • 3.5mm screw terminal cable,connecting single wires with open cable heads to your 3.5mm jack..
  • 3.5mm 1/8'' trrs cable, it has four total conductors - three signal and a ground as opposed to a more common stereo jack's two..
  • No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. Wiring diagram: PIN 1 - red wire.
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • 3.5mm trrs plug cable is more convenient to use more quickly without welding, and you can use the 22-18 gauge to connect..
Check Stock

rgzhihuifz 75 Ohm to 300 Ohm UHF/VHF/FM Matching Transformer Converter Adapter with F Type Female Coax Coaxial Connector Plug Jack for Cable Wire Antenna TV 3 Pack

  • Screw-threaded F-type female connector jack match male connector plug cable wire antenna..
  • Excellently transform 75 ohm coaxial connector cable wire to 300 ohm twin lead..
  • Gold plated 75 ohm to 300 ohm matching transformer converter adapter..
  • Package contents: Pack of 3 UHF/VHF/FM/TV Matching Transformer..
Check Stock