ReviewsLeaf Spring Spacer Lift Kit

Supreme Suspensions - Front Leveling Kit for 1994-2018 Dodge Ram 1500 2.5' High-Strength Steel Spring Spacers Lift Kit (Tig Welded) 2WD 4x2 Pro

  • COMPATIBLE WITH 1994 – 2018 Dodge Ram 1500. *Will only work on 2WD Models with Independent Front Suspension (IFS). Not recommended for Ram 1500 REBEL, TRX, Mega Cab or Extended Cab models. Will NOT Fit models equipped with AirRide Suspension System..
  • CONTENTS: (2x) High-Strength Steel Spring Spacers, Installation Instructions and Supreme Suspensions Pro Pack..
  • TECHNICAL NOTES: 2.5 inch front suspension lift. Please note that front spacer thickness to lift height is not a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved..
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools*. *Please note: Compressing your springs can be VERY dangerous. We recommend the use of a Spring Compressor Tool to ensure a safe disassembly of your springs and prevent the spring from causing injury or damage to your vehicle. An alignment is always recommended if you are altering the height of your vehicle..
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

X AUTOHAUX 2 Inch Front Suspension Spring Strut Spacer Leveling Lift Kit for Dodge for RAM 1500 2500 3500 2WD 1994-1998 2000-2017 2019-2020

  • [Fit for] Fit for Dodge for RAM 1500 2500 3500 2WD 1994-1998, 2000-2017, 2019-2020. (DOES NOT FIT 4WD).
  • [Note] Will Raise the front of your truck by a TRUE 2".Leveling Lift Kit Thickness:3.7cm/1.46"(H) Real Lifting Height: 2" The actual thickness of....
  • [Durable and longlasting Material] The spacer is CNC machined out of quality billet aluminum to match you factory suspension. Our mounting hole....
  • [Why get a leveling kit?] The leveling kit raises the front of your pickup to even out the overall body of the vehicle and gives you extra room for....
  • [Easy Installation] In comparison to suspension lift kit,leveling kits are much more cost effective and easier to install.Other than that,You maintain....
Check Stock

Spank Spacer Kit (Orange, 3/6/12mm) Bike Headsets & Accessories, Bike Headset Spacer, Bicycle Headset Spacer for 1 & 1/8 Inch Stem, Aluminium Alloy Bike Stem Spacers for MTB BMX Mountain Road Bikes

  • DIAL YOUR FIT WITH SPANK INDUSTRIES HEADSET SPACER KIT: Make your ride special with the Spank Industries spacer kit for bicycles. Greatly improve the fit and function of your headset with an affordable and stylish kit..
  • BRUSHED ANODIZED WITH LASER LOGO (12MM SPACER RING): Spank Spacer Kit for Bicycle is designed to make your ride a bit more comfortable. Using these spacers paired with your existing axle will allow you to achieve the comfort you want..
  • SPACER KIT WITH 3, 6 & 12MM HEADSET SPACER RINGS: With Spank Spacer Kit, you'll find the perfect balance of fit and function for your bicycle's performance. It includes 3mm, 6mm and 12mm headset spacer rings..
  • DIAMETER OF 1 & 1/8" (28.6MM): This kit includes everything you’ll need to give your bike a longer ride. Only compatible with Spank Spacer 1 and 1/8” (28.6mm) diameter headsets..
  • RECOMMENDED FOR: All mountain, enduro, trail, free ride, DH, E-Bike, XC, Gravel.
Check Stock

Spank Spacer Kit (Green, 3/6/12mm) Bike Headsets & Accessories, Bike Headset Spacer, Bicycle Headset Spacer for 1 & 1/8 Inch Stem, Aluminium Alloy Bike Stem Spacers for MTB BMX Mountain Road Bikes

  • DIAL YOUR FIT WITH SPANK INDUSTRIES HEADSET SPACER KIT: Make your ride special with the Spank Industries spacer kit for bicycles. Greatly improve the fit and function of your headset with an affordable and stylish kit..
  • BRUSHED ANODIZED WITH LASER LOGO (12MM SPACER RING): Spank Spacer Kit for Bicycle is designed to make your ride a bit more comfortable. Using these spacers paired with your existing axle will allow you to achieve the comfort you want..
  • `SPACER KIT WITH 3, 6 & 12MM HEADSET SPACER RINGS: With Spank Spacer Kit, you'll find the perfect balance of fit and function for your bicycle's performance. It includes 3mm, 6mm and 12mm headset spacer rings..
  • DIAMETER OF 1 & 1/8" (28.6MM): This kit includes everything you’ll need to give your bike a longer ride. Only compatible with Spank Spacer 1 and 1/8” (28.6mm) diameter headsets..
  • RECOMMENDED FOR: All mountain, enduro, trail, free ride, DH, E-Bike, XC, Gravel.
Check Stock

Wheel Spacer Set of 4-6 Lug 2 inches 50mm WheelCentric Adapter 6x5.5 - Compatible with Chevrolet GMC & Cadillac - 99-12 Silverado Sierra 02-06 Avalanche 1995-2012 Tahoe Suburban - 6x139.7mm

  • 6 Lug Wheel Spacer Kit 6X5.5 2 Inches - Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • Compatible With Chevy, GMC & Cadillac Vehicles - 1999 - 2012 Escalade | 1993 - 2000 C2500 | 1994 - 1998 K1500 | 1994 - 2000 K2500 | 1995 - 2012 Tahoe | 2000 - 2005 Astro | 2002 - 2012 Chevrolte Express 1500 | 2003 - 2012 Savana 1500 | 1992 - 2012 Yukon | 2003 - 2005 Safari | 1999 - 2012 Sierra 1500 | & more. See below for the full vehicle list..
  • Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits..
  • OEM Fit, Quality, Finish - CNC machined anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..
Check Stock

Supreme Suspensions - 3' Front Leveling Lift for 2004-2022 Nissan Titan, 2004-2015 Nissan Armada and 2004-2010 Infiniti QX56 2WD 4WD - Microfiber Cleaning Towel Included with Purchase

  • COMPATIBLE WITH 2004 - 2023 Nissan Titan, 2004 - 2015 Nissan Armada 2004 - 2010 Infiniti QX56. Fits 2WD and 4WD models. *Does Not Fit Nissan Titan Pro4X Model..
  • CONTENTS: (2x) T6 Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack & Microfiber Cleaning Towel.
  • TECHNICAL NOTES: 3 inch front suspension leveling lift. *Please note that front spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, and this accounts for an additional lift beyond the actual thickness of the spacers..
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires. After an easy 1-2 hour installation process*, you're ready to feature your new and improved ride! *An alignment is recommended after installing any kit that alters strut geometry..
  • PREMIUM SUPREME SUSPENSIONS MICROFIBER TOWEL: Included a high quality 16" x 16" Supreme Suspensions Black Microfiber Towel with short fibers on one side and long fibers on the other side. Perfect for Job Cleanup, or Fine Detailing..
Check Stock

Wheel Spacer Set of 4-6 Lug 1.5 inch 38mm Hub Centric 6x5.5 - Compatible with Toyota Vehicles - 1996-2018 4Runner, 01-07 Sequoia, 2001-18 Tacoma, 00-06 Tundra, FJ Cruiser - 6x139.7mm

  • Hubcentric Wheel Spacer Kit 6X5.5″ 1.5 Inches – Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle’s performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • Compatible With Toyota Vehicles – 1996 – 2018 4Runner | 2007 – 2014 FJ Cruiser | 2001 – 2007 Sequoia | 2001 – 2018 Tacoma | 2000 – 2006 Tundra |. The wheel spacers are 1.5 inches thick with 106mm center bore diameter, 12 x 1.5 threaded studs and a 6×139.7mm bolt pattern..
  • Complete Kit – This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits..
  • OEM Fit, Quality, Finish – CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..
  • Lifetime Warranty – This 1inch wheel spacer k....
Check Stock

Spank Spacer Kit Purple 3/6/12mm Bike Headsets & Accessories Bike Headset Spacer Bicycle Headset Spacer for 1 & 1/8 Inch Stem Aluminium Alloy Bike Stem Spacers for MTB BMX Mountain Road Bikes

  • DIAL YOUR FIT WITH SPANK INDUSTRIES HEADSET SPACER KIT: Make your ride special with the Spank Industries spacer kit for bicycles. Greatly improve the fit and function of your headset with an affordable and stylish kit..
  • BRUSHED ANODIZED WITH LASER LOGO (12MM SPACER RING): Spank Spacer Kit for Bicycle is designed to make your ride a bit more comfortable. Using these spacers paired with your existing axle will allow you to achieve the comfort you want..
  • SPACER KIT WITH 3, 6 & 12MM HEADSET SPACER RINGS: With Spank Spacer Kit, you'll find the perfect balance of fit and function for your bicycle's performance. It includes 3mm, 6mm and 12mm headset spacer rings..
  • DIAMETER OF 1 & 1/8" (28.6MM): This kit includes everything you’ll need to give your bike a longer ride. Only compatible with Spank Spacer 1 and 1/8” (28.6mm) diameter headsets..
  • RECOMMENDED FOR: All mountain, enduro, trail, free ride, DH, E-Bike, XC, Gravel.
Check Stock

TORCH Lift Kit For 2000-2006 Chevy Tahoe GMC Yukon Suburban 1500 SUV 4WD 4X4 3 Front 3 Rear Lift

  • FITS: 2000-2006 Chevrolet Tahoe & Suburban 1500 2WD 4WD 2000-2006 GMC Yukon & Yukon XL & Suburban 1500 2WD 4WD 6 LUG MODELS WITH TORSION BAR....
  • CONTENTS: Front Adjustable Lift Torsion Keys, Billet Rear Spacer Lift Kit (CNC Machined and Anodized Black), Front Shock Extenders and Hardware.
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
  • Ships Same/Next Business Day. 2-3 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • Notes: 6 LUG MODELS WITH TORSION BAR SUSPENSION ONLY.
Check Stock

Wheel Spacer Set of 4-6 Lug 1.25 inch 32mm Hub Centric 6x5.5 - Compatible with Toyota Vehicles - 1996-2018 4Runner, 01-07 Sequoia, 2001-18 Tacoma, 00-06 Tundra, FJ Cruiser - 6x139.7mm

  • Wheel Spacer Kit of 4 6X5.5" 1.25 Inches - Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • Compatible With Toyota Vehicles - 1996 - 2018 4Runner | 2007 - 2014 FJ Cruiser | 2001 - 2007 Sequoia | 2001 - 2018 Tacoma | 2000 - 2006 Tundra |. The wheel spacers are 1.25 inches thick with 106mm center bore diameter, 12 x 1.5 threaded studs and a 6x139.7mm bolt pattern..
  • Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits..
  • OEM Fit, Quality, Finish - CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..
  • Lifetime Warranty - This 1inch wheel spacer kit manufactued by AA Ignition....
Check Stock

TORCH 3″ Front 2″ Rear Leveling Lift Kit for 1995-2004 Toyota Tacoma 4WD TRD SR5 With Differential Drop – Models with 6 Lug Wheel Bolt Pattern ONLY

  • FITS: 1995-2004 Toyota Tacoma 4WD TRD SR5 (6 LUG MODELS ONLY – will NOT fit 5 lug models).
  • CONTENTS: 3″ Front Lift Strut Spacers, Differential Drop Kit With Skid Plate Spacers, Rear Tapered Lift Blocks, Extended U-Bolts and Hardware.
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
  • Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • NOTES: Front Strut Spacers will generate 3″ of Lift, it is NOT a 3″ thick spacer. Please message us if you have any questions.
Check Stock