ReviewsLeather Laser Cutting Machine

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

【Create Your Own Logo】This 50W laser engraver for home can meet your daily needs. It can engrave on wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
【Newly upgraded compressed spot laser shaping technology】F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, p....

Check Stock

ATOMSTACK Honeycomb Working Table F1 for Laser Engraving and Cutting Machine, Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting, Compatible with All Laser Cutter,380x284x22mm

Double Protection Desktop: ATOMSTACK honeycomb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. It is very suitable for various styles. CO2 or diode laser engraving machine..
Anti-slip metal clamps for fixing:This laser cutting honeycomb table is all made of metal, high-precision CNC processing, and it has fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming..
Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature..
Cutting Through Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb table will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to ....

Check Stock

KENTOKTOOL Laser Engraver, Laser Cutter with 10W Optical Power, Ultra-fine Compressed Spot Laser Engraving Machine with Touch Controller/APP Control

...ompleted in 10-20 minutes. The service life can reach 20000 hours. Both X-axis and Y-axis have accurate scales, and the 400*400mm large engraving area can meet your various engraving needs..
【More Compatibility】More objects can be carved, including wood, acrylic, glass, stainless steel, ceramics, stone, plastic, leather, cardboard and round objects (extra rollers are required). Compatible with Lightburn computer engraving software, LaserGRBL and mobile phone engraving software MKSLaser. Support Win 7/Win 8/Win10/Win11/XP/Mac systems. If you have any questions, please contact us for professional technical support..

Check Stock

SCULPFUN Laser Cutting Honeycomb Working Table Board for CO2 or Diode Laser Engraver Cutting Machine, for Slight Burnt & Smooth Edge Cutting, Visible Cut-Through, Table-Protecting, 300x200mm

Necessary Accessories for Laser Cutting: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work..
Cutting Through Observable Design: We add 4 height increase pads for easy view. When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through..
High Quality Full-Metal Structure：SCULPFUN honeycomb table is made of metal, processed by high-precision CNC, it’s strong, stable, rust-proof, durable and high flatness..
Safe Metal Pad & Precise Scale Lines: Comes with a metal pad to protect the table from laser damage. A right angle measuring scale on the X and Y axes allows easy and quick measurement of the cutting object..
Wide Compatibility: Compatible with various laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine..

Check Stock

SCULPFUN Laser Engraver Working Table,Laser Honeycomb Pad,Desktop Protection,11.81x7.87x2.17 in,for Laser Engraving Machine Cutter Tool Set

【Cut through observable design】Laser Honeycomb Working Table contains a very convenient cutting and observing design. When the laser cuts through wood or acrylic, the metal backing plate at the bottom of the honeycomb panel will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether to cut through..
【Necessary accessories for laser cutting]】Laser Honeycomb Working Table uses the laser cutting table to cut wood, acrylic and other materials. The edges of the wood are neat and clean, not easy to be yellowed by smoke, and a clean cutting work can be obtained..
【Metal desktop protection board】Honeycomb Working Table is equipped with a metal desktop protection board, which can protect the table from laser damage. The Laser Protection Pad is very suitable for small DIY diode lasers..
【High-quality workmanship with measuring ruler】The X-axis and Y-axis of the Laser Honeycomb Working Table contain precision scale lines to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraving. The Laser Protection Pad is made of metal and processed by high-precision CNC. The structure is firm, not easy to deform, and has....

Check Stock

Atomstack A20 pro Laser Cutter and Engraver Machine by UESUIKA, 130w Diode Laser Engraving Machine with Air Assist Kits, 20W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot

without being restricted by the computer.
【Upgraded Precise Laser Engraver】The upgraded Atomstack self-developed 32-bit motherboard and built-in 256-bit color scale makes the engraving work more precise, you can engrave on mental, wood, bamboo, cardboard, plastic, leather, PCB, alumina etc.
The powerful engraver machine reduces the laser focus area to 0.08*0.1mm, which's focus spot area is 1/3 of other lasers.
the wood laser engraver can take into account precision engraving and high-energy cutting at the same time.
【Easy to Install】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup is about 30 minutes.
【Operational Safety】The panoramic filter glass protective cover filters 97% of ultraviolet laser damage and Goggles will protect your eyes.
the emergency stop button can be used in the event of an unexpected situation.

Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

- ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
& - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
- - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....

Check Stock

ATOMSTACK X30 PRO Laser Engraver, 160W DIY CNC Laser Engraving Cutting Machine, 6-core Diode 33W Laser Power for Wood, Vinyl and Metal, Offline Engraving, Built-in F30 Pro Upgraded Air Assist System

...laser multiple times work can easily cut 25mm thick wood board, 30mm thick black acrylic.
can directly engrave mirror stainless steel metal, ceramics, opaque glass and other materials..
【High efficiency】Compared with 10W laser engraving machine, X30 Pro has 200% higher cutting speed and 150% higher cutting depth. Compared with 20W laser engraving machine, X30 Pro has 50% higher cutting speed and 25% higher cutting depth..
【Equipped with F30 Pro upgraded air-assist kit】the cutting capacity is greatly improved while the cutting accuracy and cutting quality can also be optimized to a great extent..
【Newly upgraded Atomstack self-research 32-bit motherboard】built-in 256-bit color scale map, so that the engraving works more fine, higher contrast, so that your engraving is not just black..
【New upgrade of laser module】bored with the fixed focus piece? Think the air assist is not beautiful enough? Now, the new X30 Pro laser module has a built-in tool-free focus module and a built-in air-assist system, without the interference of wires, simple and beautiful..

Check Stock

SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)

...trolled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 Pro is equipped with an air assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and makes the finished works more high-quality..
▶【Built-in High Pressure Air Assist Nozzle】 - S30 Pro laser cutting machine is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean and smoothy..
▶【High Precision Ultra-thin Linear Rail Engraving】 - S30 Pro laser engraver adopts ultra-thin laser shaping technology, the laser focus is as thin as hair, very powerful for engraving. Besides, the carving machine adopts the most accurate 0.005mm industrial linear guide, which greatly improves the engraving accuracy, and there is no wave line when engraving. When comparing small cutting details, the S30 does not have the wavy pattern that appears ....

Check Stock

xTool M1 10w Compact 3-in-1 Laser Engraver & Cutting Machine for All Crafts, Higher Accuracy & Smarter 16MP Auto-Focus, Create Customized Wood/Metal/Paper/Acrylic/Iron-on/Vinyl, Home Decor & More

...rst desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system.
SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan with exhaust pipe quickly blows away and discharges smo....

Check Stock

SCULPFUN S10 Laser Module with Air Assist Nozzle, 10W Optical Power, 20mm Wood 15mm Acrylic Cutting, Faster & Stronger Laser Cutter, Ultra-Fine Compressed Spot, Compatible with Laser Engraving Machine

Cut 10mm walnut and 6mm MDF and other high density materials.
Carving metal, glass, stone, etc. Which means S10 has higher energy density, stronger cutting penetration and engraving capabilities..
Engraving/Cutting Materials: Engraving materials: all kinds of wood, bamboo, MDF, cardboard, plastic, leather, PCB, aluminum oxide, 304 stainless steel, ceramics, dark stone, etc. Cutting materials: all kinds of wood, MDF, acrylic, cardboard, non-woven, bamboo, leather, some plastic boards, PCB, etc..
Highly Compatible Design: SCULPFUN S10 laser module comes with a clever and highly compatible structural connection device, which can be well adapted to different laser engraving cutting machines, 3D printers, CNC milling machines, such as SCULPFUN S9/S6pro/S6. Also compatible with other brands laser engraver..

Check Stock