ReviewsLed Lamp t8

LUXRITE 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC (4 Pack)

PLUG & PLAY - Use these as a direct replacement to your existing fluorescent tube lights that make use of the ballast already in your ceiling fixture. These 48inch LED bulbs are compatible with an extensive list of ballasts so you can just install these without making any adjustment. No need to change your shunted lamp holders or tombstones. Check ballast list for compatibility..
BALLAST BYPASS - Not using a ballast? Feel free to hardwire these directly since these can handle single end or dual end powered connections. Capable of both 120V and 277V wiring installations and can work with existing shunted lamp holders/tombstones when dual end connected. If using a single end install, you will need to use non-shunted lamp holders/tombstones..
CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the next 45 years, based on 3 hrs/day use. Each t8 LED bulbs 4 foot has a frosted cover and is shatterproof which allows for safer installation compared to glass fluorescent lights. Use these in your shop, garage, workshop, office, basement, indoor, outdoor, or anywhere in your home requiring t8 LED lamps..
RELIABLE LIGHTING - Zero flickering light, zero delay, and zero worries with 4' tube light bu....

Check Stock

EFAYCRR (6 Pairs) Tombstone Base Holder Socket Connector with T8 T10 T12 Single Pin FA8 8ft LED Bulb Light Replacement Fluorescent Plunger Lampholder

【UL Standard】Single Pin T8 lamp holders are UL listed.Made of Flameresistant material..
【Widely used 】FA8 tombstones fit for all kind of T8 T10 T12 single pin fluorescent and LED tube lamp, advertising light box and more.Perfect for lighting up your home or office, basement, closet, studio, etc. Hold the lamp tightly..
【Electronic Parameter】Max Current 6A, Max wattage 660w,Voltage: 100-600V..
【Easy to install】Snap-in or Slide-on Installation, Can Directly Connect with The FA8 Single Pin Light Tube..
【Package included】6 Pairs Single Pin FA8 Sockets for 10 tubes (without cable).

Check Stock

2FT LED Tube Lights, 24' 8W(25W Fluorescent Bulb Replacement) LED Tube Light Fixture, Two Pin G13 Base, 6000K, Works Without Ballast, Dual-Ended Powered, Frosted Cover, Pack of 4

✔Pack of 4, 8W G13 LED Tube Light Bulbs, Great replacement of F18T8 F20T10 F20T12/CW Fluoresent Lights, 1120LM, 6000Kelvin, Dual End Powered, LED Tube lights 2FT come on quickly and reliably, bulbs are perfect for place where you need lots of light, such as workshop basement garage barn.
✔ENERGY SAVING: Save 52% on your electricity bill! Replace 20W fluorescent tubes by 8W 2FT LED Tube Light . Reduce re-lamp frequency with a lifetime of 50,000+ rated hours (17 years with 8 hours/day 365 days).
✔EASY INSTALLATION: Existing ballast needs to be removed or by-passed. International standard shape for T8 LED Tube light 2FT. easily fitted Instead of traditional fluorescent tube lamps..
✔SAFETY: Like all other LED tubes on market, our T8 led tube lights 2FT take the less fragile plastic covers, so the special flame retardant material on the double ends is very important for avoiding the risk of fire disaster, which may caused by unexpected short circuit etc..
✔ QUALITY ASSURANCE - 3-year unlimited warranty, easy and fast replacement is offered if any quality issue.

Check Stock

Aqueon Modular LED Aquarium Light Fixture, 20-inch

Slots for two additional LED lamps of your choice: Day White, Colormax, Beauty Max or Max Blue.
Changing LED lamps are easy to snap in and out to customize the look of your aquarium.
Use up to 70% less energy than T8 fluorescent lamps.
Fits Aquarium Size 10, 20 Extra High, 35 Hexagon.

Check Stock

5000k led Flourescent Tube Replacement 4ft G13 Base T8 led Tube Light 28w 2 Row Daylight White(Bypass Ballast)80W Equivalent , 3360 Lumen, Dual-End Powered Clear Cover AC 85-277V 100 Pack

✔ Ballast Removal required : Remove the ballast before you install these T8 4ft led bulbs 2pin ends！.
✔ SAVE 65% INSTANTLY - Save 65% on your electricity bill. Replace 80 Watt fluorescent tubes with 28 Watt LED Tube lights (Lighting output 3360 lumens) ..
✔ HIGH BRIGHTNESS - Using imported high brightness LED as light source,Brightness is three times as the same power traditional light source.
✔ EASY INSTALLATION - Can be installed on the traditional G13 4FT T8 lamp socket, bypass the starter and ballast before installation.This 4ft led bulb is double-ended connection. Fast, simple and secure installation..

Check Stock

Keystone KTEB-120-1-TP-EMI Fluorescent Ballast 1-Lamp F20T12 20W T12 120V

F20T8, F20T12, F18T8, F17T8, F15T8, F15T12, F14T8 or F14T12.
Keystone KTEB-120-1-TP-EMI electronic rapid start T12/T8 ballast..

Check Stock

NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!

Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
2-year, warranty does not require registration.
however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.

Check Stock

Fulham Workhorse Electronic Ballast, Instant, 277V, -20deg.F

Price For: Each Wiring Type: Parallel Power Factor: Greater Than 0.9 Total Harmonic Distortion: Less Than 33.% Min. Starting Temp.: -20 Degrees F Light Output: Normal Ballast Type: Electronic Special Features: Versatile, High Power Factor, Lightweight, Small Case Size Ballast Factor: 1.18 Start Type: Instant Ballast Family: WorkHorse Item: Electronic Ballast.
Lamp Type: CFT, CFTR, CFQ, 2D, CR, T5, T5HO, T8, T12 Lamps Number of F32T8(30W) Lamps: 1 Number of F17T8 Lamps: 1 Length: 3-5/16" Number of F32T8(28W) Lamps: 1 Number of F32T8 Lamps: 1 Height: 1" Number of F32T8(26W) Lamps: 1 Number of F25T8 Lamps: 1 Amps AC: 0.15 Number of F28T8 Lamps: 1 Number of F14T5 Lamps: 1 or 2 Number of F20T12 Lamps: 1 Number of F28T5 Lamps: 1.
Number of F32T8U Lamps: 1 Number of F21T5 Lamps: 1 or 2 Number of F24T5 Lamps: 1 Voltage: 277 Number of F18/19T8 Lamps: 1 Number of F30T8 Lamps: 1 Input Watts: 5 to 35 Number of F15T8 Lamps: 1 Width: 2-5/16" Number of F13T8 Lamps: 1 Number of Lamps: 1 or 2 Country of Origin (subject to change): China.

Check Stock

(Pack of 25) CNSUNWAY 4FT LED Light Bulbs, 22W 2400LM 6000K Super Bright White, Type-B Remove Ballast, Double-Ended Power, Frosted Cover, T8 T10 T12 Flourescent Light Bulbs Replacement

✔EASY REMOVE BALLAST INSTALLATION – CNSUNWAY T8 4 foot led bulbs are easily fitted to replace traditional T8 T10 T12 fluorescent bulbs. Please must remove the starter and ballast before installation.Failure to do so will cause irreparable damage to the led tube! Product must be installed by licensed electrician or technician with electrical safety knowledge..
✔ENERGY SAVING – CNSUNWAY 4ft led light tube has 2400+ lumens high output with only 22 watts power consumption.Comapared with fluorescent tube,it could save up to 65% on your electricity Bill!.
✔FLUORESCENT LIGHT BULB REPLACEMENT – CNSUNWAY T8 4ft LED light tube is ideal replacement for T8 T10 T12 led fluorescent light bulb. It’s compatible with existing T8, T10, and T12 fluorescent fixture, making LED conversion easier than ever..
✔HIGH QUALITY LIGHT TUBE- CNSUNWAY shatterproof 4ft T8 LED tube adopts high quality LED chips, offers sustained high brightness with a long lifespan, no flicker, no noise, non-polluting..
✔HASSLE FREE WARRANTY – CNSUNWAY LIGHTING offers 24/7 after sale service and 2-year unlimited warranty! If you have any question, pls feel free to contact with us for a quick solution..

Check Stock

Lithonia Lighting IBE 22LM MVOLT 50K 22,000 lumens Linear High Bay, 5000k | Daylight

TECHNOLOGY: Easily replaces traditional 175 watt metal halide, 4-lamp T8 HBF, 2-lamp T5HO saving up to 48% energy.
ENERGY SAVINGS: Integrated LEDs generate a nominal 12,000 lumens while efficiently using up to 83 watts to save money on utility bills.
DIMMING: Thermally protected driver standard with 0-10V dimming. Light Source: LED - Static.
RATINGS: Meets highest standards - 6kV surge protection.
UL , cUL certified to US and Canadian standards, listed for damp locations.
VOLTAGE: Multi-volt 0-10V dimming driver.

Check Stock

JESLED T8/T10/T12 4FT LED Bulbs - 24W Dual Row V Shaped LED Light Bulb, 6000K Cool White, Replacement Fluorescent Bulbs (40-65W Equivalent), Clear Cover, Ballast Bypass(25-Pack)

【EASY BALLAST BYPASS INSTALL】 - JESLED 4 ft Type B LED Light Bulb are dual-end powered and require a simple, energy-saving, ballast bypass installation. Refer to our installation guide for details. NOTE: Please install this T8 4Foot bulbs away from the radio, remote control door, etc., which may cause EMI.(Make sure the original ballast is REMOVED before installation).
【BRIGHT, ENERGY SAVING】 - JESLED V Shape T8 T10 T12 4ft LED light bulbs can illuminate your space with 3000+ lumens. Instantly economize 63% on your electricity bill when you replace 65watt old fluorescent tubes with high output 24watt 4ft LED light bulbs..
【LONG LASTING TUBE】 - JESLED shatterproof 4ft T8 LED tube lights have an outstanding life rating of 50,000+ hours! These 4ft led lights can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
【FLUORESCENT TUBE REPLACEMENT】 - JESLED T8 4ft LED light tubes are ideal replacements for T8 T10 T12 led fluorescent bulbs. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever..
【HASSLE-FREE WARRANTY】 -JESLED offers 24/7 after-sale support, 60 days full refund policy and 3 years hassel-free warranty. Please contact us directly ....

Check Stock