Nixie Tube Driver Board (NTDB4) KIT for 4 Nixie Tubes
- We provide Arduino Library and Example Code.
ReviewsLed Nixie Tube Clock
ClocTeck Nixie Tube Clock Wooden Digital Clock for Bedroom,Easy Alarm Settings and 12/24h Display - A Retro Gift to Decorate Your Desk and Bedroom
- 【Nixie Tube Simulation】: retro modern desk clock, using LED to reproduce the beauty of retro digital tube display. By using the LED, to achieve low power consumption, security effect..
- 【Full-color RGB color change function】: Using full-color LED, it can achieve 16 million colors digital color change. Use the MOED key to switch freely between 7 cool display modes to create a "exclusive space" that suits your mood..
- 【High-quality material】: Exquisite retro-style cherry wood base, which uses acrylic and ABS parts full of wood warmth and technological sense. It is an artistic, beautiful and practical product, and is a perfect gift for friends and relatives..
- 【Easy to assemble/set up】: This product is a semi-finished product, only need to assemble the numbered acrylic plate and the top cover. *Note: There is a protective film on the surface of the acrylic plate to protect the acrylic plate when cutting, so it must be removed before assembly. (There are scratches on the protective film when cutting, but it is not a damage to the acrylic sheet, but if the film is peeled off, it becomes a highly transparent acrylic sheet.).
- 【Appropriate product size】: About 237.5 x 61.5 x 79 mm, the size is just right, suitable for placement anywhere. It....
Onyehn 2pcs LTC1871 DC-DC Boost Step-up Voltage Converter Module 100W High Power Adjustable Output 3.5-35V Power Regulator Board with LED Voltage Meter
- No user/operator instructions or data sheets.Find the download data by yourself, please make sure you consider whether you know the operation before buying. Size: 68x42x14mm, LTC1871 IC with External MOSFET..
- Conversion Efficiency: Up to 96%. Low input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency..
- Boost voltage to a stable regulated output. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects. Constant voltage regulation, not for raw LEDs..
- Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage.
- The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display input voltage value, "OUT" LED bright display is the output voltage value)..
- Output voltage must be greater than input voltage, do not apply reverse polarity voltage, voltmeter works only when input is >= 4V..
170V DC High Voltage Power Supply Module Boost Converter for Vacuum Tube, Nixie Tube Clock, Magic Eye 6E2 Level Indicator 10V-24V DC Input, 90V-250V DC Output (Blue)
- DC-DC boost power supply module, 3845 scheme, widely used in Nixie tubes, Nixie tube clock, Vacuum tubes 6E2, 6E1, 6E5 audio level indication..
- Input voltage 10-24V, output voltage 90V-250V adjustable. Easily drive more than 10pcs vacuum tubes. Low heat, no need to add heat sink..
- The higher the output voltage, the lower the output power and the lower the efficiency. When the output voltage is 170V, the maximum output current is 25mA..
- With the shutdown function, the SHUT pin through the MCU connected to the high level off the booster board, if not use, Vacant or connect to GND..
- Module Size: 5.0x3.0x1.9cm/1.96x1.18x0.74inch..
Cadmos Nixie Tube Clock.Glow Tubes Analog Clock.Creative Retro Digital Variable Color.Exquisite Desktop Decoration- Gift Idea-No Assembly Required (Imitation Wood Grain)
- ①【NO ASSEMBLY REQUIRED】-This product don't require any assembly, Just plug in the Type-c cable＆USB adapter（included ）to start using..
- ②【CUSTOM DISPLAY COLOR & MODE】 -The nixie tube clock uses RGB LED tubes, Which can be manually adjusted colors and 9 display modes,There are a variety of adjustable lighting effects such as rainbow gradient light mode, Breathing display mode, Flowing water gradient mode,Timer mode..
- ③【EASY TO SET】 This product can set Year, Month, Day, Hour, Minute, Second without installing any PC software or driver.The color and 6 levels brightness Dimmer can be changed according to your needs.The Screen can be turned off individually.
- ④【 MEMORY BACKUP 】The package contains an USB port adapter ＆ TYPE-C cable to power the digital clock. When the power is off, Memory backup can automatically save time & Colors settings (the time is not displayed), No need to reset again when power is on..
- ⑤【USB CHARGE PORTS】The 5V 1A USB charging ports at the back of this digital clock allow you to charge your iPhone, Android phones, and other smart devices at the same time..
- ⑥【GREAT GIFT IDEA WITH 365 DAYS PRODUCT WARRANTY】 - This cool stuff is not only suitable for your room, But also a great gift for Christmas,....
2-Pack DC 9V 1A Power Supply Adapter, Plug 5.5mm x 2.1mm, Center Positive
- Input voltage: AC 100-240V 50/60 Hz, Output: DC 9V 1A (1000mA).
- Connector Size: 5.5mm x 2.1mm, Cable length: 2.0m (6.6 ft).
- Works with Arduino UNO R3 / Nixie tube clock / Elegoo, IEIK UNO R3 / MEGA 2560 / Schwinn elliptical machine, A10 A15 A20 A25 A40 103 120 130 213 220 240 430, Schwinn bike.
- Power supply polarity: Center or Tip is positive (+), Sleeve is negative(-), ( DO NOT fit pedals, keyboards which requrie a power supply with center negative ).
- Warranty: 24 months and lifetime technical support, ETL listed, FCC.
DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits
- The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
- Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
- 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
- Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
- The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
GUAZI STORE Tube Clock,Imitation Nixie Tube Clock DIY Creative Clock, IPS LCD Screen,Transparent Crystal Base,Desktop Decoration, Support 01 02
- UPGRADING: Support NTP service, automatically synchronize local time.
- VERIFY: IPS clocks are genuine ELEKSTUBE clocks, which can be verified by the official IPS PC Client..
- OUTSTANDING APPEARANCE: The nixie clock is a work of art, a perfect blend of innovative technology and vintage look. 6 LCD screens covered with delicate glass tubes. An open-circuit design, GB colors and an elegant aluminum base..
- MULTIPLE DISPLAY PRESENTATIONS: More than 20 display options. Customize the display clock or pictures by the smart UPLOAD TOOLS Software (ONLY SUPPORTS WINDOWS SYSTEM).
- EASY TO SET UP: Easy to set up with instructions, change settings or display options..
DZS Elec 3pcs XH-W1209 Micro Temperature Controller Switch DC 12V LED Digital Heating/Cooling Temp Thermostat Relay Module -50 to 110 Degree 10A with Waterproof Sensor Probe
- Compact Size: 48.5x40mm, light weight, convenient to use, easy to install..
- Wide Temperature Control Range: -50 to 110 degree Celsius, High Precision: 0.1 Degree Celsius..
- Use the waterproof sensitive NTC (10K 0.5%) sensor probe as the measurement input..
- Power Supply: DC 12V, low power consumption, Quiescent Current: Less than 35mA, attract current less than 65mA.
- Equipped with 0.28″ 3-bit LED nixie tube, bright red color digital display, clear, easy to read..
HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3
- 4-digit LED display module with LED brightness adjustable and clock point..
- Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
- The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
- Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
NovelLife Tube Clock, DIY Nixie Tube Clock Kit Simulation,Digital Calendar Stopwatch,6 Bit IPS LCD Screen Time Photo Display, Smart Wirelesss Control,Creative Desktop Decoration Gifts
- UPGRADING: Support NTP service, automatically synchronize local time.
- VERIFY: IPS clocks are genuine ELEKSTUBE clocks, which can be verified by the official IPS PC Client..
- OUTSTANDING APPEARANCE: The nixie clock is a work of art, a perfect blend of innovative technology and vintage look. 6 LCD screens covered with delicate glass tubes. An open-circuit design, GB colors and an elegant aluminum base..
- MULTIPLE DISPLAY PRESENTATIONS: More than 20 display options. Customize the display clock or pictures by the smart UPLOAD TOOLS Software (ONLY SUPPORTS WINDOWS SYSTEM).
- EASY TO SET UP: Easy to set up with instructions, change settings or display options..