ReviewsLed Pedestrian Signal

Partsam 10x 3/4

These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet.
Package includes 10Pcs 3/4″ Amber Led Marker Lights 3 Wires in Clear Lens, 3 diodes per light, Fix 3/4″ Hole.
Warranty: We truly offer 1 year warranty! If have any questions or issues about our 3/4 led marker lights, Please feel free to us and we will reply in 24 hours.
Sealed Light, 3 Wires Setup, High Low Function.
3/4″ amber led marker lights 3 wres in clear lens: 3/4″ round LED lamp for use as a combination turn signal and running lamp, can be installed anywhere you’d like to mount them by drilling a 3/4″ hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
Wiring Tips: hardwired with three wires, white is ground, red is high brightness for turn signal lights and black is low brightness for marker lights or running lights.

Check Stock

Caltric Heat Sensor Switch Compatible With Yamaha Rhino 660 Yxr660 Yx-R660 2004-2007

This technology can detect pedestrian and wildlife before your headlights to prevent collusion Will detect pedestrian, deer, moose, elk, kangaroo and....
High definition thermal night vision with 384x288 thermal sensor and 720x480p output resolution. Standard video connector can connect to any....
Long Detection Distance: It can detect heat signatures up to 3000ft beyond the scope of the headlight beam..
Artificial intelligence will identify the object and give a visual and audible warning up to 400ft.
Great for any vehicle driving at night including, RV's, semi-trucks, buses to prevent wildlife collisions Must have for fleet safety to prevent costly....

Check Stock

La Crosse Technology 617-249 1.8\ Curved Blue Digital Atomic Dual Alarm Clock, 6.60\ L x 1.55\ W x 3.45\ H, Black

Programmable snooze (5-60 minutes) and adjustable brightness & volume.
POWER UP: 1.Insert the provided stand into bottom of clock. 2. Insert the 5.0 volt power cord into an outlet, then into your clock. Remove the insulation tab from the CR2032 battery Note on the WWVB ATOMIC TIME SIGNAL.
IMPORTANT: When powered on, the clock will immediately search for the WWVB Atomic Time Signal for 7 minutes. Hold the ATOMIC button for 3 seconds to stop or start the search. During the atomic time search the buttons will not function. Backlight will dim. USB charge port will not work. Signal Search Indicator: Receiving strong WWVB signal: LED flashing Successful Reception: LED solid Failed Reception: LED disappears The clock will automatically search for the WWVB signal every night at 1:00 am, 2:00 am and 3:00 am..
If there is still no WWVB reception, the clock will search WWVB time signal again at 4:00 am and 5:00 am alternatively. For best WWVB Atomic Time Signal Reception: Please keep your clock three feet away from electrical outlets and other electronics, to avoid interference.

Check Stock

12V Speed Adjustable 2 Pin LED Electronic Flasher Relay for Motorcycle Turn Signal Direct Replacement Universal Hazard Warn Hyper Flash Relay Black,2pcs

【SPEED ADJUSTABLE】This LED flasher relay fixes motorcycle turn signal hyper flash, allow LED light to blink at the normal rate, Clockwise:SLOWER ,....
【APPLICATION】This 2-Pin Electronic Led Flasher Relay fit for most motorcycle/bike to fix the LED bulbs related turn signal light flashing, not....
【SPECIFICATION】Blinker Relay 2 Pin. Operating Voltage: 12V (11V-15V). Max Power: 42W. Switch Power: 0.02A to 12A. Working Temperature: -40°C to....
【PLUG AND PLAY】This Turn Signal Flasher Relay is plug-and-play. Work to directly replace Most Standard Factory 2-Pin Flasher. Eliminate the need....
【PACKAGE INCLUDED】2PCS Black adjustable 2 Pin motorcycle flasher relay for LED turn signal..

Check Stock

Eagle Lights 2” Infinity Beam Front and Rear (1156) LED Turn Signal Kit w/Running LED Light Ring Covers for Harley Davidson Motorcycles

EAGLE LIGHTS LED TURN SIGNALS - Upgrade your old turn signals to LED! Easy to install and awesome looking! As easy as changing a bulb. On the front turn signals the outer ring of 7 LEDs illuminate for the running light. They are highly visible and a great upgrade for your bike being over 3X brighter than stock..
EASY INSTALLATION – With the Eagle Lights LED Turn Signals, upgrading couldn’t be easier. Our LED turn signals are plug and play on most Harley Davidson models. Installation typically takes about 5 minutes. Pop off the lens, replace it with your new LED turn signal, push the turn signal into place and go for a ride. Ride safer, look better, and ride longer with the Eagle Lights LED Turn Signals..
NEVER GO DARK - Our LED turn signals have a 7 LED halo ring mounted inside a trim ring. The front halo ring is 6000K and is a pure bright white light. The inner 24 LEDs are amber and function as the turn signal. The halo ring will turn off when the LED turn signal is active. For the rear, all 31 LEDs will illuminate red for the turn signal..
EAGLE LIGHTS LIFETIME WARRANTY - Our turn signals are designed to outlast your ....

Check Stock

NTHREEAUTO 1157 Front LED Turn Signals 2 Inch Bullet Blinkers SMD Panel Compatible with Harley Dyna Sportster Road King Street Glide Softail

【Compatibility】Fit for 2 inch bullet led turn signals with 1157 double contacts motorcycle. Such as compatible with Harley Dyna, Street Glide, Fat Boy, Softail, Road King, Springer, and other models..
【2x Brighter Than Factory Light】This front turn signals built in 48 PCS SMD LED light, lower power consumption, with 5000h life, brighter than factory Halogen bulbs, bring a wider visible, make you easier notice while riding. Anti-scratch and waterproof. Besides, waterproof connector anti-electric, offer safer usage..
【Switchback Mode】Upgrade design, the motorcycle blinkers can be used as driving light and turn signal. When turning on the running light, each LED bright white light, also can supplements your headlights, increasing visibility.
When the turn signal is on, the lights flash between amber and white, keep you safe on the road and light up your ride..
【Plug and Play】This led turn signal integrated handle design, no wiring needed. Just easy like install the stock bulbs. Only 5 minutes are required to install. Note: If the LED can not flash or HYPER FLASH, it is need resistors for the turn signal to correct the flash rate back to normal..
【Package and Warranty】Come with 2Pcs amber LED turn signal light. You are backed by 6-Month w....

Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..

Check Stock

Motorcycle Underglow LED Lights, NTHREEAUTO Strip Light Kit with Brake Accessory Lighting for Golf Carts ATV UTV, 12pcs

Sophisticated Design: This LED strip kit combines 3 basic functions that make it safer for you to ride at night – optimum lighting, additional brake light, and turn signal features..
Turn Signal: The control box divides LED strips into 2 zones – left and right. When you press the turn signal button, all strips on the same side will blink in amber, making your changes more noticeable..
Maximum Brightness: Maximizing brightness is a priority for the design of this LED strip kit M18r-T, which includes choosing premium materials for LED strips and assuring optimum power supply from the circuit..
Output for Larger Bikes: The control box has a bigger circuit board, which has at least 2X capacity than the regular one. It provides sufficient power supply to more LED strips and you won’t see the brightness decreases noticeably..
Brake Light: All LED strip lights will go red as an additional warning signal, when you squeeze the brake, reacting instantly, and go back to the previous setting once you release brakes..

Check Stock

New Balance Safety Light - Small Flashing LED Running Light Clip Visibility Blinker for Pedestrian Night Walking, Running, Jogger, Bicycle, Helmet, Back Pack | Flash / Strobe or Steady Light Options

SAFETY LIGHT: New Balance pedestrian safety light is designed to enhance visibility with a flashing or steady reflective led light to be used as a running flash light, walking light, bicycle warning light and more.
CLIP-ON RUNNING LIGHT: Johgger ligt clip features a spring-clip attachment that easily connects to your hat, shirt, backpack, bike, helmet, shoe, belt or waist.
WATER RESISTANT: LED safety light clip is durably made to withstand most any workout environment including rain, sweat and other extreme elements while walking, running, hiking, or biking.
MULTI-MODE LIGHT OPTIONS: Red led safety light features a steady light mode that works great as bike safety light or running visibility light. Or, use the small strobe light as a running blinker or flashing safety light.
NEW BALANCE: We've been fearlessly independent since our beginning in 1906. During that time, we've developed performance products without fear, in our own unique way. Today, we remain both fearless and independent as we continue our journey..

Check Stock

NTHREEAUTO 4PCS Sequential LED Motorcycle Turn Signals Front Rear Mini Blinkers Brake Light Indicators Compatible with Honda Shadow Kawasaki Vulcan Yamaha Suzuki Bobber Cruiser Chopper

【Compatibility】Universal mini led turn signals fit all 12V motorbikes, such as compatible with Street Bike, Cruiser, Adventure Touring, Dirt Bike, Harley, Honda, Kawasaki, Yamaha, Suzuki and other motorcycles. You are backed by 3-Month warranty since the order purchase date..
【Brake & Turn Signal Combo Light Kit】Multifunction switchback & sequential mode, stylish, nice and attractive, add features to your motorcycle. Front: Outer flowing amber for signal, white for running lights, center red for brake light.
When the brake light is on, the outer white halo ring will on at same time. Rear: center amber for signal, outer red halo ring will turn off while turn signal is on..
【4X Brighter Than Factory Light】NTHREEAUTO mini motorcycle blinkers, built in high power SMD led chips, energy saving is superior to traditional lights, with high brightness, low heat generation, lower power consumption, extended service life, greatly increased your visibility at night, foggy and rainy days or any extremely weather, providing the safety driving..
【5X Longer Lifespan】Motorcycle turn signal lights processed with ultrasonic treatment housing and ABS Plastic bottom shell, impact resistance, heat and low temperature resistance, protect led chips from water o....

Check Stock

GTYUNKE Fits 4Runner 2014-2021 LED DRL Daytime Running Light Front Fog Daytime Running Lamps with Dynamic Sequential Turn Signal Lights Amber/White Light, Black

✈ Wide range of uses: for the replacement and modification of headlights for automobiles (cars, cars, motorcycles, scooters, trailers, etc.). An ultra-bright white LED light is used as a daytime running light and a flowing amber yellow LED light for use as a turn signal - tira led flexible.
✈ Safety: Enhance lighting in rainy and foggy days to avoid traffic accidents. Use it to ma....

Check Stock