ReviewsLed Pedestrian Signal Lights

Eagle Lights 2” Infinity Beam Front and Rear (1156) LED Turn Signal Kit w/Running LED Light Ring Covers for Harley Davidson Motorcycles

  • EAGLE LIGHTS LED TURN SIGNALS - Upgrade your old turn signals to LED! Easy to install and awesome looking! As easy as changing a bulb. On the front turn signals the outer ring of 7 LEDs illuminate for the running light. They are highly visible and a great upgrade for your bike being over 3X brighter than stock..
  • EASY INSTALLATION – With the Eagle Lights LED Turn Signals, upgrading couldn’t be easier. Our LED turn signals are plug and play on most Harley Davidson models. Installation typically takes about 5 minutes. Pop off the lens, replace it with your new LED turn signal, push the turn signal into place and go for a ride. Ride safer, look better, and ride longer with the Eagle Lights LED Turn Signals..
  • NEVER GO DARK - Our LED turn signals have a 7 LED halo ring mounted inside a trim ring. The front halo ring is 6000K and is a pure bright white light. The inner 24 LEDs are amber and function as the turn signal. The halo ring will turn off when the LED turn signal is active. For the rear, all 31 LEDs will illuminate red for the turn signal..
  • EAGLE LIGHTS LIFETIME WARRANTY - Our turn signals are designed to outlast your ....
Check Stock

HERCOO Amber Side Mirror Marker Lights Lens w/LED Compatible with 2008-2016 F250 F350 F450 Super Duty Turn Signal Aftermarket Replacement, Qty: 2, Amber & White

  • Compatible with F250 F350 F450 Super Duty 2008 2009 2010 2011 2012 2013 2014 2015 2016.
  • Side mirror turn signal lights lens is made of PC materials (anti-scratch, waterproof), no faded with long-time exposure.
  • LED lights function as running/parking lights and turn signal lights.
  • long-lasting life, 20,000 to 50,000 working hours.
  • Package includes two amber side mirror turn signal light lens and two amber & white LED bulbs, bulbs and bulb holder is not included.
  • 90 day manufacturer warranty since order purchase date.
  • feel free to send email if there's any issue before or after purchase.
  • your case will be taken seriously regardless of warranty period.
  • Application: turn signal side mirror lights, for vehicle w/ dual post trailer towing side mirror ONLY.
  • Installation Tips: play and plug, direct fit, no modification needed, no additional resistors or relay required.
  • LED has two polarity, if the LED bulb doesn't light, disconnect it rotate it 180 degrees and plug it back in.
Check Stock

NTHREEAUTO 4PCS Sequential LED Motorcycle Turn Signals Front Rear Mini Blinkers Brake Light Indicators Compatible with Honda Shadow Kawasaki Vulcan Yamaha Suzuki Bobber Cruiser Chopper

  • 【Compatibility】Universal mini led turn signals fit all 12V motorbikes, such as compatible with Street Bike, Cruiser, Adventure Touring, Dirt Bike, Harley, Honda, Kawasaki, Yamaha, Suzuki and other motorcycles. You are backed by 3-Month warranty since the order purchase date..
  • 【Brake & Turn Signal Combo Light Kit】Multifunction switchback & sequential mode, stylish, nice and attractive, add features to your motorcycle. Front: Outer flowing amber for signal, white for running lights, center red for brake light.
  • When the brake light is on, the outer white halo ring will on at same time. Rear: center amber for signal, outer red halo ring will turn off while turn signal is on..
  • 【4X Brighter Than Factory Light】NTHREEAUTO mini motorcycle blinkers, built in high power SMD led chips, energy saving is superior to traditional lights, with high brightness, low heat generation, lower power consumption, extended service life, greatly increased your visibility at night, foggy and rainy days or any extremely weather, providing the safety driving..
  • 【5X Longer Lifespan】Motorcycle turn signal lights processed with ultrasonic treatment housing and ABS Plastic bottom shell, impact resistance, heat and low temperature resistance, protect led chips from water o....
Check Stock

NTHREEAUTO Universal ATV UTV Turn Signals, Side-by-Side Street Legal Kit, Turn Signal Switch Hazerd Lights Compatible with Polaris Sportsman Ranger RZR Yamaha Grizzly Honda FourTrax Can-Am Defender

  • 【Fitment】Our turn signal kit is universal. Compatible with different brands and models of ATV and UTV, such as Polaris Sportsman Ranger RZR, Can-Am Outlander Defender, Yamaha Grizzly Wolverine, Honda FourTrax Pioneer, Kawasaki Brute Force Teryx, Arctic Cat Alterra, Suzuki KingQuad, Kymco MXU.
  • 【Transform Your UTV into a Road-worthy Vehicle】Our street legal kits for UTVs are designed to help you to make your off-road vehicle compliant with regulations and roadworthy. Turn signal switch, front rear led turn signals, front rear turn signal wire harness, hazerd lights etc. are included to meet the safety and regulatory requirements. Tips: UTV street-legal laws vary by location. Please check your local laws before driving on the road..
  • 【Easy Installation】We've improved the wiring system to allow for plug-and-play connections, eliminating the need for splicing and making installation faster and more straightforward. Compared with other street legal kits, our UTV turn signal kit is much easier and more convenient to install..
  • 【Hight Quality Turn Signal Swith 】The UTV turn signal switch features switches for bot....
Check Stock

DERMOKA LED Side Marker Turn Signal Lights for 1997-2006 Jeep Wrangler TJ Switchback Amber White Front Bumper Signal Lamps, Smoked Len 4PCS

  • FITMENT: Led front turn signal side marker lights kits is compatible with 1997-2006 Jeep Wrangler TJ. OEM part number: 55155629AC 55155628AC..
  • UPGRADE REPLACEMENT: With high power LED chips, 5 times brighter than OEM bulbs, gives your wrangler a clear look, Function as side marker and amber white turn signal lights to increase safety, best replacement for the OEM signal indicator lamps..
  • HIGH QUALITY: DOT&SAE Certified. LED front blinker lights are weather-sealed, Waterproof/Dust proof/Shockproof. Made of light-weight durable ABS plastic housing and tough PC smoked black lens, lifespan more than 55000 hours..
  • EASY INSTALLATION: Plug and play, no wiring or modification, no damage to the original housing. Simple upgrade only in 15 minutes or less. Perfect replacement for the OEM side turn signal light..
  • Package: 4*side marker turn signal lights (driver's side and passenger's side) Provide 12 months warranty. If you have any questions, please feel free to contact us. Thank you for your support..
Check Stock

Partsam 20 x 3/4" Round Led Light Trailer Boat Marker Clearance High Low 3SMD Clear Lens, 3/4" round LED combination turn signal running lamp fender lights 3-WIRE assembly Taillights(10Red+10Amber)

  • Package includes 20Pcs(10Pcs Red and 10Pcs Amber) 3/4" Led Marker Lights 3 Wires in Clear Lens, 3 diodes per light, Fix 3/4" Hole.
  • Sealed Light, 3 Wires Setup, High Low Function.
  • 3/4" amber led marker lights 3 wres in clear lens: 3/4" round LED lamp for use as a combination turn signal and running lamp, can be installed anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp(one function at a time). It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
  • 3/4" red led marker lights 3 wres in clear lens: Clear Lens Red Mini 3/4" Stop Turn Tail Lights 3 LED with Rubber Grommets,very bright for it's size. Dual brightness. install with a rubber mounting grommet and requires a cutout hole of 3/4" diameter. These 3/4" led lights come with 3 wires (white wire ground, black wire is tail light/marker light/clearance light/running light and red wire is for stop and turn functions). This light is DOT approved as your only tail light or turn signal.
  • These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet....
Check Stock

Partsam 14Pcs 6.5" Inch Amber LED Side Marker Lights Clearance 16 Diodes Surface Mount Led Cab Panel Lights Turn Signals Sealed Waterproof 12V

  • Partsam 14 Pieces 6.5 inch amber 16 diode LED marker lights - Amber Lens. These side marker lights function at 12 volts dc current. Each led marker light contains 16 high-flux LEDs and consumes less energy than incandescent lamps.
  • These oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included.
  • Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8").
  • can be function as marker light, clearance lights, turn signal lights.
  • fits in a combo-style hole and Chrome bezel hides mounting screws.
  • sonically-sealed lens and IP65 waterproof housing, please do not use it under water.
  • Different from many other truck marker lights in the market, there led marker clearance lights have a more modern, curvy shape and look great on your bumper, cab-and-sleeper kits, fender guards, and just about everywhere else you can imagine. Its long, thin footprint and flush-mount installation makes it a ....
Check Stock

Partsam 2Pcs Flat Line 6 Inch Rectangle Led Marker Clearance Lights and Turn Signal Lights 22 Diodes Amber Chrome Housing, 2x6 Rectangular Led Marker Lights Surface Mount

  • Package includes 2 Pieces 2x6 Amber 22 LED Rectangular Clearance/Marker Lights/Turn Signal Lights Amber Lens.
  • These rectangle flat line led lights can be used for Cab and Sleeper panels and are perfect for trailer applications as they are direct replacements for trailer lights.
  • This rectangular led marker light has 22 diodes total.Measures approximately 6" long by 2" wide by 1.18" high, with mounting holes about 4.92".
  • These 2x6 led lights are surface mount with 3 wires: white is ground, red is high brightness for rectangular turn signal lights and black is low brightness for rectangle led marker lights or clearance lights.
  • Warranty: We truly offer 1 year warranty for this 2" x 6" Flat line Amber Marker LED Trailer Light! If have any questions or issues about our flat line led lights, Please feel free to us and we will reply in 24 hours.
Check Stock

OXMART Motorcycle Passing Lights, Driving Spotlight Turn Signals Fog Light Headlamp Angel Eyes with Mounting Brackets for Harley Davidson Classic Electra Street Glide Road King Heritage Softail

  • ▶Fitment: Universal suit for Honda,Suzuki,Kawasaki,Harley Davidson and Yamaha Cruisers or any custom applications..
  • ▶Durable: Made of high-quality materials, and solid constructures. Steel light stand, ABS headlight, ABS turn signals, durable, high transparency, and super bright. ▶Safety: The headlight with reflective interior for maximum visibility and quick on/off response time increased the safety factor, water-proof, anti-rust, and corrosion-resistant makes it suit for most the environments including rainy/snowy/fog days..
  • ▶The installation steps: ①Insert the power cord of the led fog lights and the screw at the tail into the hole of the bracket, then turn it upside down ②Remove the fittings and screws at the tail of the turn signal lights and install them on the inverted led fog lights to screw, then tighten the fittings with the led fog lights nut ③After tightening the bottom fittings, reconnect and fix the turn signal lights, and tighten the screws ④Complete assembly..
  • ▶Technical Specification: Working voltage – DC 12v. Light Color: White, Amber. Passing Light Size: Approx. 4″ lens diameter,4.3″ housing diameter. Turn Signal Light Size: Approx. 3.1″ diameter. Total Height: Approx. 10.2″. Total Length: Approx. 18.1″..
Check Stock

Partsam 2pcs 6" Amber LED Rectangle Tail Stop Marker Light Trailer Truck RV 3 Wires 21LED, 6x2 Rectangular Led Clearance Lights, 2x6 Big Side Marker Lights

  • Sealed amber led Light, 3 Wires Setup, High Low Function. Other accessories are not included.
  • Compared with those similar side marker lights on market which can be used as led marker light only, this 6 inch rectangle LED lamp is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These are a really popular style thanks to their multi-faceted design.
  • Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8". Dim Function draws 20 mA & Bright Function draws 110 mA approx.. This trailer clearance light is unversal for almost all 12V vehicles as well as the size fits.
  • This amber marker lights is HARDWIRED with 3 wires: Black is ground, white is low brightness as marker lights, clearance lights or running lights, red is high brightness as turn signal lights.
  • Commonly known as a trailer light, these 2" x 6" rectangular trailer lights can really be installed anywhere you'd like to surface mount them. It is going to fit perfectly on your truck. Note: This rectangular marker light is generally waterproof, please do not use it in heavy rain or under water, th....
Check Stock

Yorkim 1157 LED Bulbs white Super Bright, 1157 Brake Light Bulb, 9-30V 1157 2057 2357 7528 BAY15D LED Bulb with Projector Replacement for Back Up Reverse Lights or Tail Lights - White

  • 【ULTRA BRIGHT】 – Yorkim 1157 LED bulb is powered by 54 pcs 3014 & 4 pcs 3030 chipsets to offer 400% brighter lights than halogen bulbs for your vehicle.
  • 【SPECIFICATION】 - Note for Turn Signal LED Bulb** 50w 6ohm Load Resistor (ASIN:B07KS6KMYG) is needed to prevent hyper flash or error code. Head diameter 15mm, Length 39mm, Voltage 12v-24v, Extremely bright output 1600LM/Bulb.
  • 【FITMENT】 - 1157 BAY15D 2057 2357 7528, this 1157 led bulb is commonly used for Backup Reverse lights, Brake lights, Tail lights, Parking Lights, Daytime Running Lights or Turn Signal Lights.
  • 【EASY TO INSTALL】 - Non-polarity design, simply plug and play, built-in constant current IC driver for longer lifespan up to 50,000 hrs.
  • 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 1157 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product.
Check Stock