ReviewsLed Ribbon Connector Cable

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....
Check Stock

[3 Pack] KEYGMA LED Strip Light Dimmer, DC 12V-24V Dimmer Switch for Strip Lights 2835 3528 5050 5630 5730 3014, Single Color

  • The 12 volt led dimmer switch is knob-operated control. You could easily adjust the brightness or turn on/off the strip lights or LED rope light via rotating the knob..
  • PMW dimming: 0-100% smooth dimming range, no flickering no humming..
  • Widely used for single color 2835/ 3528/ 5050/ 5630/ 5730/ 3014 LED strip light, LED rope or ribbon lights..
  • The cable lenght is 5.3 inches for each side and the body size: 2.56*1.26*1.34 inch. The LED strip light dimmer comes with a standard DC 5.5*2.1mm female/ 3.5*1.35mm male connector, easy to use and simple wiring..
  • Notes: DO NOT overload use. The Max. output current is 2A and the Max. output power is 60W. The supply voltage of the LED strip light dimmer is DC12V~24V..
Check Stock

RDEXP 0.5mm Pitch 20-Pin 200mm Length FPC Ribbon Wire Flexible Flat Cable Set of 25

  • The item FFC (Flexible Flat Cable) usually refers to the extremely thin flat cable often found in high density electronic applications like laptops and cell phones.
  • The each end cable is reinforced with a stiffener to make insertion easier or to provide strain relief.
  • This cable is for the Raspberry Pi ribbon connectors when connecting a peripheral such as an external display, camera, or the AlienSpec Ribbon Connector Breakout Board.
Check Stock

Phanteks RGB LED 4 Pin Adapter, Specified for Cases with Multi Colors RGB Control (PH-CB_RGB4P) Black

  • Compatible with upcoming motherboards with 4pin RGB Header.
  • Allows you to synchronize your Phanteks cases with Multi-colors LED control (Luxe, Mini XL, P400..) and Phanteks Led strip to the motherboards software..
  • Customize and colorize your LED strip and case LED with the use of the motherboards software.
  • Long cable length for easy wiring and cable management.
  • Length: 609mm (24in), Connector Number: 3.
  • Connector Detail:1x RGB LED Extension Connector (12V, G, R, B), 1x Motherboard RGB LED Connector, 1x RGB LED Strip Connector. Terminal Gender:M-FDescriptionPhanteks' RGB LED Adapter is a simple, frustration-free solution to the upcoming RGB integrated motherboards that includes the RGB headers. This adapter will allow you to synchronize and control the lighting of your LED strip and Phanteks cases with the motherboards' lighting software..
Check Stock

Wire Jumper Pin Connector, 620 Pcs Jumper Wire Cable Pin Header Connector Housing Kit Male/Female Crimp Pins Terminal with Storage Box

  • Dupont Connector Kit, This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
  • Servo Connector Kit, These work great with all your typical breadboard style pin connectors and sockets.
  • Jst Connector Kit, Great selection of parts to make both male and female connectors is sizes from 1x1 to 2x6 pins.
  • Ribbon Cable Connector Kit, Come in a transparent box of classification management for convenient use and storage.
  • Jumper Wire Cable Pin Header Connector Housing Kit, There are total 620 pieces jumper wire connector parts which is good for home electronics prototyping.
Check Stock

Monoprice SCSI (HPDB) 68 Female to IDC 50 Female Adapter (100076)

  • The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
  • It is also known as the "Alterative 2" connector.
  • It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
  • The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
  • It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.
Check Stock

Antrader 30CM 16-Pin IDC Connector Flat Ribbon Cable with Black 2.54mm FC Dual Row Female to Female Sockets, 6 Pieces

  • Double rows, 8Pin female to 8Pin female header with both end, compatible with 2.54mm spacing pin headers..
  • Total length is 12" (30cm) with 2.54mm Female to Female 16P 2 x 8 sockets..
  • Wire Pitch: 0.05" (1.27 mm) Center Spacing.
  • Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • 6pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc..
Check Stock

BLS 2.54mm Pitch IDC 20-Pin F/F Connector Extension Flat Ribbon Cable 150cm Length

  • Product Name : Flat Ribbon Cable, Connector Type: Female to Female IDC Connectors.
  • Withstand Voltage: 300V, Temperature :105C , Pin Number :20 pin.
  • Pin Pitch : 2.54mm , Wire Range: 28AWG , Length : 150cm/60".
  • Width : 2.5cm/1" , Exterial Materials : Plastic,.
  • Net Weight : 58g , Package Content : 1 x Flat Ribbon Cable.
Check Stock

2-Pack COMeap Small Mini USB 3.0 19 Pin Internal Extension Header Adapter Cable for Motherboard 5.9-inch 15cm

  • 『USB 3.0 19 Pin Male - Female』Small Mini USB 3.0 Connector 19/20-Pin Internal Extension Cable.
  • 『Compatibility』Low profile USB 3.0 extender/cable for motherboards. A great option for SLI configurations that need access to USB 3.0 headers.
  • 『Super Speed』Data transfer speed is up to 5Gbps..
  • 『Flat Ribbon Wire』Using the top quality flat ribbon wires for stable signal and data transmission, which are more durable comparing to individual....
  • 『Parameter』Length(including connectors): 5.9-inch(15cm)(approx), Gauge: 1007-22AWG flat ribbon wire(standard tin-coating copper wire), Quantity:....
Check Stock

5050 4Pin LED Strip Connector Kit - 10mm RGB LED Connector Kit Includes RGB Extension Cable, 12x LED Strip Jumper, 10x L Connectors, 2X T Connector, 10x Gapless Connectors, 20x LED Strip Clip

  • ★PACKAGE INCLUDES: 1x 2 way RGB splitter cable, 1x RGB extension cable, 10x LED strip jumper connector, 2x strip to RGB controller jumper, 10x L Shape Connectors, 2x T Shape Connectors, 10x gapless LED strip Connector, 20x LED strip light clips, 10x 4 Pin Male Connector, 2x Pry opening tool.
  • ★APPLICATION: 10mm 4 wire LED light strip connector kit for waterproof and non-waterproof 5050 RGB Color Changing LED strip lights.
  • ★OPERATING CONDITION: These LED tape connectors support 0-4A current and 0-24V voltage input, heat resistance level from -20 ~ 100 degree.
  • ★NOTE: When connecting waterproof LED strip lights with these LED strip connectors, silicon gel on the surface of soldering area must be peeled off.
  • ★WARRANTY: 24 months warranty for all iCreating LED strip light connector, 90 days money back guarantee for any reason, 24 hours online customer service.
Check Stock

Mxzzand 3in Industrial Robot Parts Accessories Omnidirectional Wheel Metal 2Pcs for Industry Production with 10pcs Driven Roller

  • Among the many items in this kit are: Linkbot-I robot, 1 Linkbot Wireless Dongle, 3 Snap Connectors, 2 3.5" Wheels, 2 4" Wheels,1 Ball Caster, 1 Push Scoop, 1 Hacky Sack, 1 36" USB Cable, 1 7" USB Cable, 1 8"x10" Resealable Bag, 1 Year Linkbot Warranty.
  • 1 Sketch Pack, 12 Snap Connectors, 1 Gripper Pair, 2 Bridge Connectors, 3 Cube Connectors, 1 L Connector, 1 U Connector. 2 Snap Connector Caps, 2 3" Rectangle Connectors, 2 4" Rectangle Connectors, 2 5" Rectangle Connectors, 2 T Connectors, 8 Colored Foam Cubes, various screws and nuts.
  • 2 Arduino-Uno-Compatible Boards, 1 USB A-B Cable, 1 Joystick, 1 RGB LED, 1 Ultrasonic Distance Sensor, 8 Red LEDs, 8 Green LEDs, 8 Blue LEDs, 8 Yellow LEDs, 2 7-Color LEDs, 2 GRB LEDs, 12 220 Ohm Resistors, 12 10k Ohm Resistors, 1 LDR VT90N2 Photoresistor, jumper wires, 3 10k Potentiometers, 1 Fullsize Breadboard, 6 Push Buttons.
  • 1 9V Battery Holder, 1 Mini Breadboard, 1 Linkbot-Arduino Cable, 1 2-in-1 Dual Phillips/Slotted Screwdriver, 3 Snap Connectors, 1 Cube Connector, 1 L Connector, 3 Mounting Plates, 2 Sensor Bracket, 1 Li-ion Rechargeable Battery,.
  • 1 Color Sensor, 2 Short Distance IR Distance Sensors,1 RGB LED Module with Common Positive Lead (Common Anode), 2 RGB LED Module with Common Negative Lead (Common Cathode....
Check Stock