ReviewsLed Trailer Lamp

Partsam 30Pcs 3.8

  • x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
  • Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
  • As every truck lamp come with two wires, they can only use as one function a time.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
  • Tips and Warranty: 1. These led lights are not dimmable.
  • The indicator light is hardwired with 2 wires and can be used as constant on trailer light....
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

Partsam 2Pcs 2\ x 6\ Rectangular Trailer Marker LED Lights 21 Diodes with Chrome Plastic Light Bezel w/Visors, Amber 6\ x 2\ Rectangular LED Marker Lights/Turn Signal lights Surface Mount

  • Package includes 2 Pieces 2" x 6" Rectangular Trailer Marker LED Lights with chrome plastic bezels, 21 Led diodes per amber light. Designed at 10-30 DC Volts. These chrome plastic light bezels with visor helps you dress up your 2 inch by 6 inch trailer style rectangular LED lights. Note: this bezel mounts over your existing marker light. You may need to use a little silicone for a more stable hold.
  • 6" amber led marker lights 3 wires pigtails: 6 inch rectangle LED lamp for use as a combination turn signal lights and running lamps, can be installed anywhere you'd like to surface mount them. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker light (or only an auxiliary turn signal light) by using two wires and leaving the third wire unused.
  • This 6x2 led marker light is hardwired with 3 wire pigtails: White is ground, black is low brightness as marker lights or running lights, red is high brightness as turn signal lights.
  • Overall dimensions: 6" x 2.18" x 1.57" approx. and hole to hole distance: 4.92".
  • These 2x6 led trailer lights are universal for almost all 10-30 DC volts vehicles like truck trailers Motorhome or heavy trucks like peterbilt, kenworth, freigh....
Check Stock

EverBright 1156 BA15S Led Turn Signal Light Bulb 1141 1073 7506 Base LED Replacement for RV Camper SUV MPV Car Reverse Backup Corner light 18SMD 5050Chips DC-12V,Red, Pack of 4

  • 1156 Socket ---- BA15S 1156 led bulb Red Wedge Base, Color: Brilliant Red, Input Power: 0.05A @ 12V(About 3W), Voltage: DC-12V -14V, Lumen: 450 lumens.
  • Application ----This 1141 led bulb common use for RV Trailer boat trunk Interior exterior Lighting as Tail lights, Turn signal Light, Led Brake Light, Back up lights, Reverse Light, Center High Mount Stop Lamp (3rd brake light), turn Indicator Light, Corner Light, Parking light, Side Marker Light, Width Lamp ect.
  • Cross Reference ---- 7506 led bulb direct replace Stock Bulbs: P21W 1003 1073 1095 7506 1141 1156 1156A 1156NA 1195 12088 1295 1295NA 199 2396 3497 631 5007 5008 93 97 97A 97NA.
  • Features ---- Design with 18 piece High Quanlity 5050 Led Chips, 360 degree output Lighting, Point to Point Welding, Structure and Firm, Not Easy to Damage.
  • 【Warranty】We offer "One YEAR" Warranty. 1156 led bulb widly used for Car Rv SUV Camper Trailer Truck Motorcycle Motorhome Boat Marine Replacement Interior Light and Exterior Light Bulb, if have any problem about the lights please contact us to solve..
Check Stock

HPX LED Trailer Marker Side Lights: 20 Pcs Side Marker Lights 2.5 Inch 2 Diode RV Lights Exterior Fender Marker Lights Oval Trailer Running Lights for Truck RV Boat Camper Trailers

  • 【Package Contents】You will receive 10 Amber+10Red 2.5 Inch Oval trailer lights 2 LED diodes, screws are included for mounting.The quantities and colors are sufficient for you to use and replace, and can easily meet your daily use..
  • 【Easy to Install】The trailer marker lights has two screw holes, which can be installed in any position on the outside plane of the car. Black is the Negative and the other color is the Positive. Just the holes are punched and the two wires of the side lamp are connected to the power supply system of the car..
  • 【Specification】The size of the trailer side marker lights is 0.78"" x 1.1"" x 2.5"", the center to center dimension between the screw holes: 1.89"" .These oval marker lights are the exact same size as the light on a camper..
  • 【Quality Materials】The boat trailer lights is made of high quality ABS plastic mask, bright and durable in use, which are designed with totally enclosed circuit, waterproof and can keep away from dirt..
  • 【Application】The trailer lights led kit can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights, camper marker lights, led clearance marker lights. Suitable for RV, Trailers, Campers, Motorcycle, Utility vehicle and Boat Lorry Bus etc..
Check Stock

Partsam 10X 3.8 Amber 12V Front Side Marker 6 LED Trailer Truck Lorry Indicators Lights, Amber Rear Led Marker Trailer Parking Turn Signal Lights for Truck Bus Boat Rv Lorries SUV UTV

  • Package includes 10 pieces 3.8 Inch Amber Led Trailer Marker Lights 6LED.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
  • Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
  • The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
  • Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on.
  • We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
  • The side marker indicator light is hardwired with 2 wires and c....
Check Stock

Linkitom New Halo Rectangle Submersible LED Trailer Light, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80\ Inch

  • Set of 2 pack(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), designed for 12v system. left light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker and License Illuminator, right light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker.
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
  • Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
  • Easy to instal, The distance of two studs bolts is standard 2”, Direct replacement for your original incandescent bulb unit.
  • Widely Used : Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater..
Check Stock

Partsam 14Pcs 6.5" Inch Amber LED Side Marker Lights Clearance 16 Diodes Surface Mount Led Cab Panel Lights Turn Signals Sealed Waterproof 12V

  • ...ese oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included.
  • Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8").
  • can be function as marker light, clearance lights, turn signal lights.
  • fits in a combo-style hole and Chrome bezel hides mounting screws.
  • sonically-sealed lens and IP65 waterproof housing, please do not use it under water.
  • Different from many other truck marker lights in the market, there led marker clearance lights have a more modern, curvy shape and look great on your bumper, cab-and-sleeper kits, fender guards, and just about everywhere else you can imagine. Its long, thin footprint and flush-mount installation makes it a popular choice for areas with little space to install grommet-mount lights.
  • Wiring and Warranty: black is ground, red is high brightness and yellow is low brightness.
  • we truly offer 1 year warranty for this truck trailer lights. Any ....
Check Stock

Partsam Thin Line 3.8" 6 LED Blue Side Led Trailer Marker Lights Sealed Clearance Light Indicators for Trucks Bus Trailer RV Camper Lorry Van UTV Marine Boat Stern Light Decoration Lights(10Pack)

  • Package includes 10 pieces 3.8 Inch Blue Led Trailer Marker Lights 6LED.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the blue marker lights or to the surface to which the blue light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
  • Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
  • The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
  • Partsam blue led lights function as marker lights, clearance lights, runnling lights, side marker lights, license plate lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light,cockpit light, step lights, deck lights, trailer lights, led courtesy lights, stern light, stair lights, truck lamps and so on.
  • Truly many customers use them as boat marine lights, very bright.
  • The blue led strip light bar is hardwired with 2 w....
Check Stock

Partsam Pair 3.9" Side Marker & Clearance Light Red Waterproof Black Base Mount 3LED, Sealed Thin Line LED Trailer Marker Clearance or ID Lights w/Miro-Reflectors

  • Package includes 2pcs Red 3LED 12V Truck Trailer Clearance Lamp Side Marker Light.
  • including stainless screws for installation in package.
  • NOTE: The covers are removable. Please snap off the lens and install the base with screws, then snap it on, very secure.
  • Waterproof Lens,sealed Light Led marker trailer.
  • dimensions without base: 98 x 31 x 26(mm).
  • Universal for Pickups,Truck Trailers,SUV van Caravan and Boat Lorry Bus.
  • Replace rear clearance lights on RV or replace boat trailer clearance lights.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • HARDWIRED WITH 2 WIRES(NO SWITCH): red wire is the lead and black the ground.
  • draw exactly 40 milliamps of current at full brightness.
  • Led Marker light,Auto side Lamps,clearance light,identification light,Trailer Light etc. Easy installation: waterproof, well sealed.
Check Stock

Partsam 20Pcs 3.8" 6 LED Amber Side Marker Lights, Amber Trailer Marker Lights, Front Rear Side Marker Lamp Amber, Led Marker Lights for Trucks, Cab Marker, RV Marker light Yellow (Pack of 20)

  • Package includes 20 pieces 3.8" Inch Led Trailer Marker Lights 6LED Amber Lens.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
  • Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
  • The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
  • Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
  • We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
  • The indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the yellow....
Check Stock