ReviewsLed Trailer Light Kit

Partsam 2pcs Amber Led Light Trailer 2" Round,w/Plug & Grommet Clearance Marker 4 LED

  • Partsam (2 x Amber) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber Lens, Reflex Lens.
  • Kit includes grommets and pigtails for complete installation.
  • Sonically sealed, waterproof housing and lens unit is submersible.
  • Round trailer light serves as either a side marker light or a clearance light.
  • LEDs make great replacements for incandescent lights.
  • 2-WIRE CONNECTION: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High Diameter: 0.78in.(W/ Grommet).
  • Recessed mount with included black grommet, Installation requires a 2-5/16" hole at desired location and Includes industry-standard 2-prong plug with pigtail.
  • Universally fit any Vehicles with DC 12V Such as Semi Truck & Trailer, Service Truck, Bus, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV.
Check Stock

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

  • ✅KIT INCLUDE: 2 Pcs Trailer Lights build in with License Plate Light, Turn Signal Light, Tail Light and Stop Light.
  • 2 Pure Copper Wires: Long Wire is 21.75ft, Short Wire is 4.05ft.
  • 1 Pc License Plate Bracket with lengthened mounting holes makes adjustable when installing license plate and a bag of mounting hardware.
  • ✅COMPLETE SUBMERSIBLE: We sank the light into the lake under 65ft for half an hour, then picked it up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
  • ✅MATERIAL: Accessory Wires is 100% Copper Wires.
  • License Plate Bracket made from Polypropylene Plastic.
  • Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
  • and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
  • ✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standa....
Check Stock

LIMICAR Trailer Lights, Upgrade IP68 Halo Glow Trailer Light Kit, Brake Stop Turn Tail License Plate LED Trailer Lights with 25ft Trailer Wiring Harness Kit for Truck Marine RV Boat Camper

  • PREMIUM MATERIAL: Trailer Lights includes 2pcs Rectangular combination stop / brake / reverse / tail / turn signal halo tail lights, 2pcs amber clearance lights, 25ft 4 pin wire harness, license plate bracket and mounting mounting screw, bolt and hardware, 4pcs reflective stickers. The tail lights are made of high quality ABS housing + PC lens, shockproof and dustproof, ensures long lasting durability..
  • PRACTICAL FUNCTIONS: Both of the LED trailer lights used as stop, turn, brake, tail, rear reflector, side reflector and side marker light. Besides, the left light has a license plate illuminator function. "Halo-Glow" design gives a new look for your vehicle. Much brighter and lights faster with lower energy consumption, guarantees super visibility and durability..
  • WATERPROOF RATE: IP68. Effectively protects the light from the invasion and corrosion of sand, dust, dirt, rain, snow, etc. Upgraded lampshade surface without screws, the LED trailer lights are completely welded together, the LED trailer lights are completely welded together. Featured great sealed and waterproof performance..
Check Stock

MAXXHAUL 50520 12V LED Compact Submersible Trailer Light Kit for Vehicles Under 80 Inches

  • Our trailer light kit has multiple useful functions such as for stopping and turning, as a tail light, as a rear or side reflector, as a side marker light, or as a license plate light..
  • Wiring harness is made from 18 gauge 100% pure copper wire to ensure a reliable and long-lasting product that remains effective even underwater..
  • Designed with LED instead of incandescent lights, further adding visibility and providing a much more energy efficient product..
  • Our product is sealed with sonic welding technology to prevent any liquid or debris from entering and to secure the trailer lights while being used underwater..
  • The compact size of the trailer lights provides further portability and the attachable bolts guarantees easy installation on either the rear or the side of your vehicle..
  • Our trailer light kit is compatible with towing vehicles such as boats, trailers, trucks, etc. that are under 80 inches..
  • PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION..
Check Stock

Partsam 5pcs 2" Amber Round Sealed Clearance Side Marker Light 4 LED Mount Grommet/Pigtails for Trailer Truck Camper RV

  • Partsam (5 x Amber) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber Lens, Reflex Lens.
  • Kit includes grommets and pigtails for complete installation.
  • Sonically sealed, waterproof housing and lens unit is submersible.
  • Round trailer light serves as either a side marker light or a clearance light.
  • LEDs make great replacements for incandescent lights.
  • 2-WIRE CONNECTION: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High Diameter: 0.75in.(W/ Grommet).
  • Recessed mount with included black grommet, Installation requires a 2-5/16" hole at desired location and Includes industry-standard 2- prong plug with pigtail.
  • Universally fit any Vehicles with DC 12V Such as Semi Truck & Trailer, Service Truck, Bus, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV.
Check Stock

Partsam Red Cargo Carrier Hitch Rack Lights Kit, 2Pcs 6 Inch 10 LED Oval Waterproof Tail Lights with Rubber Grommets, 76\ Wiring Harness, Bike Rack Light

  • ...his listing features for 1 set of Railed Hitch Cargo Carrier led light kit, bike rack light kit. Package includes 2Pieces 6 Inch oval waterproof LED tail lights 10 LED Diodes, 2Pieces rubber grommets, (1) 76" Wiring harness, (9) cable ties (fasten the cable and lights). The wiring harness has a standard 4-way flat, trailer-end connector for easy setup, just plug into your vehicle's trailer connector for installation.
  • This Red Cargo Carrier LED light kit provides stop, turn and tail light functions for your hitch cargo carrier. It is designed for use with different kinds of the cargo carriers as well as the size and length fits, which is required if your cargo carrier blocks your vehicle's tail lights. This cargo carrier LED Light Kit is perfect for 63152,63153,63154,63155,59108,59109,59110,59502,59507,59550,38174 cargo carriers.
  • (2) 6 Inch Oval Waterproof, red LED lights: 7 1/4" x 3" x 1 1/8"(with rubber grommets), 6 3/8" x 2 3/16" x 7/8"(light only), drill hole size is about 6 9/16" x 2 7/16".
  • It is flush mount with grommet (included) and accepts standard 3-prong plug, really plug and play.
  • Install Tips: 1.Snap the rubber type grommet into the opening in the cargo carrier.
  • 2. fits tail lights into to grommet and with some pressure on the grommet pus....
Check Stock

WoneNice LED Submersible Trailer Tail Light Kit, Combined Stop, Taillights, Turn Function, DOT Compliance, IP67 Waterproof and Fully-Submersible

  • ... tow bar has an estimated 100-hour battery life as turn/tail light 24 hours as brake lights.
  • BUILT TO LAST: Water-resistant polycarbonate plastic.
  • Sonically sealed design of this wireless tow bar wireless towing lights blocks water to protect the 2.4Hz wireless connection during rainy or snowy weather.
  • Each wireless trailer lights LED kit features a 7 blade plug and play transmitter and two temporary wireless tow lights for tow trucks with magnetic bases.
  • LED TECHNOLOGY: Each lamp features a 2.8 by 5.7-inch (5.8 by 14.5cm) red transparent face plate and 10 LED diodes.
  • Wireless magnetic tow lights offer an extended life span and high visibility that cannot be matched by traditional trailer lighting.
  • Water-resistant magnetic wireless tow lights tow light bar passed IP65 moisture test and is SAE, STI, FCC, and DOT compliant for Stop / Tail / Turn (STT) functions.
  • EASY INSTALLATION: Wireless taillights feature magnetic bases that stick to most metal surfaces to easily be installed on any vehicle, RV, camper, boat trailer, utility trailer, tow truck, or farm equipment.
  • Plug in the 7 pin transmitter to your 7 way connector and position the wireless LED tow lights.
  • We suggest attaching zip ties for long distance travels and uneven terrain for increased stabili....
Check Stock

Smoked Amber LED Front Grille Marker Lights Kit, 4Pcs 4 Inch Amber Full LED Center Grille Running/Position Lights Sealed 9 LEDs Compatible With Tacoma/4Runner/ Tundra/Silverado Grill Marker Lights

  • Each 4 inch grille marker light include 9 pieces SMD chips and bright you super bright power. SMOKE LENS give your truck a great new look, just looks like it comes that way from trucks.
  • Of curse these 4 inch amber led strip can be use other vehicles such as trailer rv bus etc. Many customers use them on trailer as trailer marker lights.
  • Installation: this 4 inch led utility strip bar is hardwired with 2 wires, black is ground, red positive.
  • Some wire them to the DRL's constant wire so they'd come on when lights come on, some wire them into an Aux switch along with the Fog Lights, some connect to the head light fuse so that the amber strip light on when turn headlights on, also some use double sided tapes to mount the amber lights bar to the hood, instead of mounting to the grill. Really a DIY retrofit set.
  • Warranty: We will offer 1 YEAR WARRANTY for this smoked amber grill lights kit since you place the order. Please feel free to send us email if there's any issue before or after purchase and we will reply in 24 hours.
Check Stock

CZC AUTO 12V LED Submersible Trailer Tail Light Kit for Under 80 Inch Boat Trailer Marine with 18G Pure Copper Wiring Harness Kit (Exclusive Trailer Light kit)

  • CZC AUTO 12V Submersible LED Trailer Light Kit includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness ,Aluminum license plate bracket instead of plastic license plate for more sturdy, NO bending and Long years lifetime..
  • 18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT Any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and Longer Lifetime!The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval.
  • Excellent waterproof/Submersible lights for Boat trailer. Sonic Welding Sealing Technology ensures sealing solidity of the LED tail lights. Every possible gap is sealed well with marine grade glue, such as wires entrance holes and edge of the lens.
  • Application for under 80 Inch width towing vechile,like boat trailer truck snowmobile,etc..
  • CZC AUTO, a reliable brand in trailer lights industry, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PlEASE NOTE: Any problem in using our Submersible trailer tail lights, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

2PCS Steel Trailer Light Boxes Housing Kit 6Inch Oval LED Trailer Tail Lights Red 2 Inch Round Red LED Side Marker Lights Grommet Plugs Wire connectors

  • 【Kit includes】 2PCS Welded Steel Trailer Light Boxes. Pre-installed 6inch oval taillights and 2inch LED round side marker lights w/ rubber grommets & license plate mounting. Durable and resistant for all weather elements..
  • 【High Visibility LED】:The LED lights are Standard 6inch oval lights w/ grommet mount Trailer Tail lights and 2inch round lights, which are long life LED and Super bright illumination. greatly improving visibility and ensuring you a safer night..
  • 【Simple Installation】All in a set and lights are mounted on the box. Just directly welded on or bolted on to the rear, bottom, side or top frame of your trailer. White wire with O ring terminal- ground. Red wire- stop turn light. Black wire- tail side marker light,.
  • 【Universal fit】for any Vehicles with DC 12V, Such as Semi Truck & Trailer, Bus, Service Van, Utility Truck, Pick Up Truck, UTE, UTV..
  • 【Warm Service】If there’s any confusion about the product, simply contact us directly we will give you a satisfactory response within 12 working hours!.
Check Stock

Partsam 10x Amber 2" Round Sealed Led Clearance Marker Light 4LED Grommet Mount RV Accessories, Reflective 2 Inch Round Trailer Led Side Marker Lights Lamps Kit Flush Mount with Wire Pigtails

  • Partsam (10 x Amber) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber Lens, Reflex Lens.
  • Kit includes grommets and pigtails for complete installation.
  • Sonically sealed, waterproof housing and lens unit is submersible.
  • Round trailer light serves as either a side marker light or a clearance light.
  • LEDs make great replacements for incandescent lights.
  • 2-WIRE CONNECTION: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High Diameter: 0.75in.(W/ Grommet) , Drill a hole about 2-5/16" to install.
  • Universally fit any Vehicles with DC 12V Such as Semi Truck & Trailer, Service Truck, Bus, Service Van, Utility Truck, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV.
Check Stock