ReviewsLeft hand Tap And Drill

BOSCH BDT516F18 5/16-18 Plug Tap and Size F Drill Bit Combo Set

Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
Plug taps – engineered for cutting right-hand internal threads.
Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
Heat-treated carbon steel tap – provides superior durability and speed.
Rolled tap threads – deliver more accuracy and are cleaner than machined threads.

21 Drill Sizes: #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64"..
Covers all tap drill sizes for tap sizes: 10-32 down to 0-80..
The portable V-Drill Guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts!.
Heat treated for durability. Side alignment marks allow accurate hole locating..

Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
Screw extractors feature an aggressive left-hand spiral design for extra gripping power.
IRWIN screw extractor size and recommended drill bit size are etched on each tool.
Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
Recommended for use with TR-88 tap wrenches and 7/64-inch drills.

2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

This tap and drill bit set produces a thread that is strong and easy to tap.
High-carbon steel plug taps are great for general-purpose threading.
135° split-point drill bits give fast, precise drilling.
Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.

High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..

Hand Pipe Tap Set are designed to clean and re-thread damaged or Jam Pipe threads.
Hand Taper Set allows chips to collect in the Flutes and are well suited for most applications.
Drill Taper Sets have an action that engages when they are run in a clockwise direction.
Pipe Tap Taper, sizes 1"-11-1/2 NPT carbon steel Pipe taps in plastic pouch case.
Drill Pipe Tap Set feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

Package included:1pc HSS right hand thread tap M12x1.25 and 1pc Drill bit 10.8mm..
My Note: During use, apply machine covers and wear safety glasses when using taps for cutting threads. Do not use excessive force or load as it may cause the tap break ..
Model / Size: M12 x 1.25 tap RH with Drill bit size 10.8mm..
Thread Type: Right Hand Thread M12x1.25 Tap RH.
My Note: All Products are testde rigorously. High speed steel offers precision cut threads, accurately formed for consistent, exact threading tool..

【29-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit. It contains 9pcs nut removers, 10pcs left hand HSS drill bits, 10pcs multi-spline screw extractors. Multiple specifications and sizes to meet your various work needs..
【EXACT SIZE】: Screw remover kit parts have clear specifications printed on them, 9pcs nut removers size: 3/4” (19mm), 11/16”, 5/8”(16mm), 9/16”(14mm), 1/2”, 7/16”(11mm), 3/8”, 5/16”(8mm), 1/4”. 10pcs drill bit size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8". 10pcs multi-spline screw extractors size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8"..
【HIGH QUALITY】: The nut remover/multi-spline screw extractor are made of high hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, broken screws. The left hand drill is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surfa....

Straight Flute Taps: Thread size: M8 x 1.25.
cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..