ReviewsLeft handed Hex Rethreading Die With Thread

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....

Check Stock

OEMTOOLS 26691 Nut Bolt Thread Gauge, Green Thread Checker and Bolt Size Gauge, Bolt Sizer with Thread Gauge, SAE and Metric Thread Gauge Reference

Five-Trick Pony: Measure hex nuts, washers, regular and countersunk bolts, and gauge fastener thread counts in one fell swoop with this bolt and nut sizer.
Find It Fast: Identify the size of a hex nut or washer in a snap using gauge holes cut into the thread guide for nuts and bolts.
Identify Stray Fasteners: This nut and bolt thread checker will save time and prevent stress by confirming your hardware size every time with its multiple measuring systems.
Knowledge is Power: The bolt gauge anticipates any measurement needed for both SAE and metric units.
The reverse side is embossed with thread gauges to identify bit thread counts.
Product Details: Bolt sizing gauge measures 8-3/4” x 3-3/8”.
Resistant to water, alcohol, oil, and grease-related damage.
Printed measurements are easy to read and fade-resistant.

Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

[Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
[Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
[Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
[Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
Includes bottom recesses for organizing the coils in included plastic bags.
[Easy to Use]: Remove your damaged thread by using an included twist drill bit.
Load the thread insert into installation tool.

Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
Ratcheting t wrench works with GEARWRENCH pass thru socket system.
Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.

Check Stock

ABN Professional Thread Repair Kit - 131pc SAE Drill Thread Restorer Kit for Restoring External or Internal Screw Holes

[Restore Stripped Screws]: Repair stripped threads with the ABN Thread Repair Tool Set.
131pc long rethreading kit is ideal for repairing 1/4, 5/16, 3/8, 7/16, or 1/2-inch internal or external screw holes.
[Use for Any Job]: Fix up your engine or restore automotive wear and tear with the rethreading tool kit.
Complete any drilling, tapping, and tang removal jobs with the thread chaser set.
[Carry With You Anywhere]: Spark plug thread chaser and bolt hole thread repair kit comes in a steel case to keep all 131 pieces neatly organized and labeled for your convenience.
Lightweight 5lb (2.3kg) case is easy to transport between job sites and takes up little room making it easy to store.
[Rely on Maximum Strength]: Thread fixer tools are constructed of chrome vanadium steel to withstand repeated use and to help prevent corrosion.
Inserts are heat-treated for long-lasting strength.
[Package Details]: Bolt thread cleaner tool standard thread repair kit includes 5 twist drills, 5 screw taps, 5 installation tools, 5 breaking pin tools, 111 thread inserts, and a carrying case.

Check Stock

SharCreatives 60 Piece Metric & SAE Threading Tap & Die Tool Set Coarse and Fine Threads for Threading and Re-threading with Accessories and Storage Case

✔PROFESSIONAL HEAVY DUTY COMPREHENSIVE SET ideal for rethreading fasteners and fastener holes, cutting or renewal internal or external threads . Precision milled SAE and METRIC tap and die set for cutting raw material or repair existing threads, remove screws and more..
✔SUPERIOR QUALITY made of hardened Alloy Steel suitable for lifelong durability, and superior strength. Suitable for cutting in steel, copper, aluminum, cast iron and etc.
✔WIDE RANGE USE - Set includes complete and MOST POPULAR SIZES (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
(20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
(12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from accessories to fall apart..
✔ PROFESSIONAL AND PERSONAL USE this tap and die kit is ideal for DIY projects at home, auto and machinery workshop and many more..

Check Stock

Irwin 1121ZR 6-48 NS Machine Screw Tap

Ideal for routine maintenance, repair work and for rethreading.
Used where high accuracy and tolerance thread is not critical.
Straight flutes are ground to provide rapid chip removal for efficient threading.
Designed for hand threading work in a variety of materials.

Check Stock

Thread Repair Kit 42Pcs Thread Chaser Set Rethreading Kit in UNC UNF and Metric Size Thread Chaser Kit Thread Restorer Kit 1/4 5/16 3/8 7/16 1/2 9/16 5/8 Pipe Bolt Thread Cleaner Tool Tap & Die Sets

...teel material, highly tempered for strength and durability. SAE size: 9,10, 12, 16, 20, 27, 28, 32.
SAE size: 11, 12, 13, 14, 16, 18, 20, 24.
【Thickened Blow Molded Case & 1-Year Warranty】Unlike other containers made of paper-thin plastic, our blow-molded case is specially thickened and not easy to break. This rethreading kit is a must-have for any mechanic whether you're a professional or just a DIY working in your garage. CMTOOL always puts our customers in the first place. We provide a 12-month free warranty and 24 hours friendly customer service to ensure your shopping experience..

Check Stock

Howards End

PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..

Check Stock

1/2\ NPT Pipe Carbon Hex Rethreading Die

✅ One Set is Enough: Our Die set include 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14, 1/2''-13, 9/16''-12, 5/8''-11, 3/4''-10, 7/8''-9 and 1''-8 UNC. A variety of dies are sufficient for almost all maintenance and repair work..
✅ Superior Durability: We cooperated with the material research institute to change the ratio of carbon in the material, greatly improve the comprehensive mechanical properties of the material, and greatly increase the service life of our dies..
✅ Precision Thread: The latest production technology maximizes the processing accuracy of the thread, and the outer surface of the threading die is smoother..
✅ Portable Metal Case: An exquisite tool case will bring you great convenience, and the tools will be returned in time after use, reducing the risk of gadget loss..
✅ 1 Year Warranty: No matter what problems are encountered when using our re-threading hex die set, we will solve it for you within 6 hours, and one-year warranty!.

Check Stock

J&R Quality Tools 40-Piece Titanium Coated Tap & Hexagon Die Set - Metric

Includes both fine and coarse threaded taps and die in Metric sizing..
Complete with compact custom fit latched ABS storage and carry case to protect and organize..
M3 to M12 taps and hexagon die with thread pitch from 0.5mm to 1.75mm.
Professional grade set of Titanium over alloy steel for superior cutting power without brittleness..
Adjustable and T-Handle tap wrenches, adjustable die wrench, screwdriver, thread pitch gauge..

Check Stock