ATOPLEE 7pcs Metric HSS 6542 Left Hand Thread Tap M3-M12
- Straight 3 flutes are ground to provide rapid chip removal for efficient threading..
- Left hand screw thread tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..
ReviewsLeft handed Machine Screw Tap
ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)
- {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
- {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
- {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
- {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
- {Package Included} 1x Left hand Thread Tap.
uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool
- Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
- Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377
- Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
- Constructed of high carbon steel for durability.
- Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
- Perfect set for the professional craftsman.
- Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
uxcell Metric Machine Tap M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool
- Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
M72 x 3 Left Hand Tap LH Metric Thread Tap HSS Plug Tap Ship by Express Delivery in 4 days
- M72 x 3 Left Hand Tap LH Metric Thread Tap.
- We will send by Express, clients can receive in 4 days.
Kastar 971 SAE and Metric Thread Restorer Kit
- PACKAGE INCLUDE --- 1Piece Ratchet Tap Holder Wrench, 5Pieces Taps(1xM3, 1xM4, 1xM5, 1xM6, 1xM8). Size of screw thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25. Length of wrench body: 85.5mm / 3.37inch. (Please clamp the tap in right place in work processing.).
- EXCELLENT QUALITY --- This product is made of excellent alloy steel materials, chromium plating and polishing on the surface, high hardness, strong and durable, comfortable grip, anti-corrosion and rust. The structure is simple and easy to install. The head of holder adopts diamond-shape design, steel jaws and knurled chuck provide a secure, firm grip on a hexagonal or square drive..
- DETACHABLE HANDLE --- Compared with the traditional tap wrench, it is more delicate in workmanship, easy to carry, and works great in tight spaces. With adjustable T handle, you can slide metal rod from side to side, added leverage in tight places. There is a ball inside the holder wrench, which is easy to install and fix the metal rod..
- EASY TO OPERATE --- The quick two-way ratchet wrench is a kind of ratchet with a three position gear box in the middle, which can be right-handed tapping or left-handed tapping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work e....
uxcell Thread Milling Threading Tap 9/16 -24 UNEF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade
- Tap Size: 9/16"-24 UNEF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
uxcell Thread Milling Threading Tap 9/16 -18 UNF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade
- Tap Size: 9/16"-18 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
uxcell Thread Milling Threading Tap 1/2\-13 UNC, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade
- Tap Size: 1/2"-13 UNC thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
uxcell Thread Milling Threading Tap 1/4\-20 UNC, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade
- Tap Size: 1/4"-20 UNC thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..