ReviewsLeft handed Thread Plug Gauge

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock

Duthyvea Boat Oval Garboard Drain Plug Kit for 1 Inch Marine Bilge Hole Hull Pipe, Stainless Steel Polishing, 3/4 Thread, with Screws & Rubber Seal O-Rings

  • Boat Drain Plug Kit fits 1" diameter transom draining pipe hole. Back mount depth is about 0.55" (14mm). The surface length of the oval garboard drain plug kit is 2" (50mm), width: 1-1/2" (38mm)..
  • Quick Draining: This garboard drain plug kit has two layers thread with OD 3/4", you can easily to screw out the first layer of boat plug with hand, then the marine bilge water will flow out by middle hole..
  • The Boat Plug Retains Itself When Left Open: The retention system works for holding marine drain plug by the second threads layer, it’s not only save your time to find a wrench to open or close draining hole, but also make you conveniently to storage a boat plug by itself..
  • Stainless Steel Boat Drain Plug Kit: The surface of oval garboard drain plug is mirror-polished, made of stainless steel will reduce corrosion..
  • Replacement O Rings & Stainless Screws: 4 spare rubber o-rings would be included in the boat drain plug kit for watertight seal, 2pcs stainless steel screws help for installation..
Check Stock

Milton 507KIT Digital Tire Inflator with Pressure Gauge, 14” Rubber Air Hose – 250 PSI, Brass Lock-on Clip Air Chuck and Compressor Accessories

  • ...-clip air chuck – Overall for easy inflation with 1 hand use.
  • INCLUDES: Rugged Comfortable pistol grip inflator handle w/bleed valve button, Digital LED Gauge w/ shock-resistant protective rubber boot, 14" rubber hose with easy-clip air chuck, 1 x 4-in-1Valve core repair tool, 4 x TR VC 8 Dome Type Valve caps, 1 x Thread seal tape, 1/4" NPT Male M-Style Plug (CAUTION: DO NOT overtighten air connection plug as it can put added pressure on the housing which could result in damage).
Check Stock

DAYUAN Professional Petrol Engine Compression Tester Kit Set for Automotives and Motorcycles

  • Adapters for a wide number of vehicles (spark plug types/depths).
  • Includes 2 rubber cones ends for quick check (no need to thread into head).
  • 3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa.
  • Fittings: M10, M12, M14, M18 (Male, With "O" Ring).
  • Includes 14mm and 18mm spark plug adapters.
Check Stock

Ball Joint Kit,Set of (3) Tie Rod End with grease fitting Fits for Club Car DS Golf Carts (1976-2008)

  • Fits Club Car DS electric golf cart models 1976-2008.
  • Brand new high quality Club Car DS tie rod end ,Allows your steering and suspension the ability to perform properly..
  • Ball Joint,Left-Hand Thread(included 2Pcs),OEM#7540.
  • Ball Joint,Right-Hand Thread(included 1Pcs),OEM#7539.
  • Set of (3) Right and Left Thread Tie Rod End.
Check Stock

Owfeel M18x1.5 DIN Valve Scuba Adapter with Gauge, Pcp Scuba Tank Valve 4500psi Working Pressure with 22-inch-Long Black Hose for Air Tank, PCP Air Rifle, Paintball, and HPA Tank (M18x1.5 Threads)

  • High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure..
  • Two Types of Threads - One-piece DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us..
  • Dual Gauge Design - one gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose..
  • Easy Installation and Quick Release - It comes with an 8mm female quick-release coupling plug, and it could be connected and released from other male fittings within seconds..
  • Strong Compatibility - Mainly used for high-pressure gas cylinders, SCBA gas cylinders, SCUBA diving cylinders or PCP gas cylinders, easy to assemble and install, for air/carbon dioxide filling..
Check Stock

PneumaticPlus SAR600-N06BG Compressed HIGH FLOW Air Pressure Regulator 3/4\ NPT - Bracket, Gauge

  • 3/8" NPT Air Regulator w/Gauge, Precisely adjust the air pressure and keep it constant.
  • Flow Rate: 88 SCFM (2500 L /Minute)@ 90 PSI.
  • Locking Regulator Knob, 0-150 psi Gauge, Metal Bracket, a pair of Air Coupler＆ Plug Kit, 2 x3/8" NPT Fittings, 1 x Thread Seal Tape.
Check Stock

.500' 1/2' Rod End Heim Joint Right and Left (2 joints)

  • Includes 1-left hand thread and 1-Right Hand thread Heim set. Jam nut included..
  • 1/2" bolt hole (Grade 8 or better recommended).
Check Stock

48 Pc Thread Measuring Wire Set 16 Different Diameter Sizes Pin Set

  • Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • Thread pitch gauge function: can be applied to measure the pitch of the thread.
  • Center gauge function: apply to grind and position thread cutting tool on a lathe.
  • Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

ZeroR® R1234YF_ Oil Charge Compressor Booster - 1 Cans

  • IMPORTANT: These cans are R134 can tap threaded (left hand thread) A R1234YF can tap will not work on this can and we suggest using ZeroR R134a Can to R1234YF Port Can Tap with Gauge.
  • Oil charge is perfect for the single use and may be used in R1234YF_ Systems.
  • Must be used in non-backflow device hose (should be able to blow through each end of hose).
  • Returns: This item is considered a HazMat Material and as such is not returnable. It requires hazmat certification to ship. Amazon does not supply a Return label and the seller will not supply return labels for this type of products. Please contact seller for any help you might need in using the product..
Check Stock

PiercingJ 36pcs Candy Colors Spots Acrylic Ear Stretching Plugs Kit and Double-flared Thin Silicone Saddle Tunnels Set

  • You will receive 6 pairs of plug with O rings + 6 pairs of screw tunnels + 6 pairs of ultra thin flesh tunnels – 18 pairs in total. Gauge:0g=8mm..
  • How to Clean: Clean them with water and let them dry naturally, or clean with medical alcohol ( swipe them with....
  • How to Screw: Please observe the thread first and ensure to match the right spot. Without matching the thread, it would be hard to screw on. If any....
  • Ultra Thin Flesh Tunnels: material: Thin Silicone.
  • Very smooth surface and comfortable touch.Soft and flexible, easy and comfortable to put on & off..
Check Stock