ReviewsLeg Leveler

Heavy Duty Furniture Levelers 3/8''-16 Thread w/ T-Nut Kit Furniture Leveling Feet Adjustable Furniture Levelers for Tables,Cabinets,Chairs,Workbench,Sofa and More,Large Base Supports 1320LBs-4 Packs

[Support Heavy Furniture] This commercial quality heavy duty furniture leveler comes with strong steel T-nut to lock and stablize the straightener, each can support max 330LBs,a set of four supports furniture weight 1320LBs! Fits for heavy furniture such as cabinets,tables,beds,workbench,sofa,chairs and more..
[Adjustable Leveling Feet] The shaft of this furniture leg is 1.77 inch long with 3/8” thread which is universally used in American Made Furniture. With a 1-3/8” diameter and 1/2”thick metal base, it can support fully adjustable height from 3/4” to 1-3/4” for maximum support and adjustability according to your needs..
[Protect Your Floors] Beside stop shaking and reduce vibration on uneaven floors, these heavy duty furniture leveling feet are also equipped with a felt pad for the base to avoid direct contact between the furniture legs and the ground, protecting the floor, tile or carpet from damage or scratches.No noise will be heard while moving or sliding the furniture..
[Easy To Install] Pre-drill a hole with a diameter of 0.5 inch on the furniture leg,then insert the T-nut(tightened with a hammer)with mounting screws, screw in the leg levelers to your desired position to complete the adjustment.If it is a metal leg, you need to weld ....

Check Stock

12Pack Leveling Feet Heavy Duty Furniture Levelers Height Adjustable Table Legs Leveler with Screw for Furniture, Cabinets, Workbench, w/Corner Protector Guard Brackets

Balance and adjust the furniture in your home. Suitable for cabinets, tables, or shelving units,etc.
1-7/8" Tall Leveler 7/8" Base. With 1-9/16" x 1-9/16" Corner Protector Edge Guard.
Made of heavy gauge plated steel with a 440 Lb capacity per leg leveler.
Pivoting steel base is capped in polyethylene for carpet and floor protection.
12 x Corner Leveling Feet + 48 x M4 Screws, 1/4"(8mm) Thread, Swivel/Tilting base with Nylon Glide.

Check Stock

16.4FT Tall Telescopic Extension Ladders Aluminum Collapsible Telescoping Ladder Retractable Telescope Ladder for Home RV Loft, 330LB Capacity

【STURDY CONSTRUCTION】The Bottom is Made Of Silicone Pad,Non-slip, Wear-resistant and Durable.
Ladder Scaffold Brackets, Screw structure is Safer, more Stable and Reliable..
【UNIVERSAL FIT 】 Use the Ladder Leveler to instantly level any ladder you have, including your step ladder..
【PORTABLE&EASY TO ASSEMBLE&DISASSEMBLY】 No bolts. No clamps. Changing from ladder to ladder is quick and easy.
Level a ladder in seconds with unlimited adjustment positions,One-Click Suspension for Easy Dis assembly..
【STRONG BEARING CAPACITY】 Supports up to 550 lbs. (250 kilos), exceeding the ladder’s 300lb, 1A duty rating..
【WIDELY USED 】 This extension Ladder Leg Leveler works indoors and out, use it on uneven ground, roof tops, and stairs, building materials & ladders, ladder-accessories..

Check Stock

Adjustable Leveling Feet Furniture Levelers Table Feet Heavy Duty Leg Levelers for Cabinets Sofa Tables Chairs,Support 1320LBs, T-Nut Kit 3/8”-16 Thread, Large Base- 4 Pack, Black

✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease !.
✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability..
✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs!.
✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/ tile/ carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises..
✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height. T-nuts and installation screws are included..

Check Stock

Heavy Duty Furniture Leveling Feet Adjustable Furniture Leg Levelers for Tables Chairs Cabinets Sofa Raiser, Support 1320LBs, T- Nut Kit 3/8”-16 Thread, Large Base,w/ 4 Felt Pads,12 Screws (4 Pack)

✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease !.
✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability..
✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs!.
✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/tile/carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises..
✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height..

Check Stock

[LOSCHEN] 8PCS Heavy Duty Adjustable Leveling Feet for Furniture,Hexagon Nuts Lock Furniture Legs Levelers,for Table, Cabinets, Workbench,Shelving Units and More

...se are 8heavy gauge, Each plated steel furniture legs can be fine-tuned until they are perfectly level to the height you want. That help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more.Holds Up to 400kg/880 lbs. Made of high quality steel with a 100kg/220 lbs capacity per leg leveler(Real Data)..
【L-SHAPED MOUNTING BRACKET】Wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture to distribute the weight for better support and stability.Ensures the cabinet load is carried by the leve.
【ADJUSTABLE FURNITURE LEVELER LEGS】The leveling feet have heavy 3/8″-16 (10mm) dia shaft that adjusts height from (2cm)0.78″ to (6cm)2-2/5″. With the wrench lock nut, you don’t have to worry about the bottom will fall off.Free spinning foot design compensates for uneven/ irregular floors. Rubber cap protects the carpet and floor and block moisture from getting to the foot,the floor surface no longer leaves rust spots..
【PROTECTING FURNITURE】May be adjusted to reduce shock, vibration, tilting, and more. Helps with uneven floors.Often used as adjustable feet for workbench and furniture on any uneven surface. Helps Lift furniture and prevent it from getting damp.These heavy duty leveler legs he....

Check Stock

Wilton Adjustable Cake Leveler for Leveling and Torting 12 x 6.25-Inch

READY, SET, BAKE: This Wilton adjustable cake leveler is the quick and easy way to create even cake layers, consistent in height. The sturdy....
CONVENIENT: Measure the height you need on the Wilton cake leveler, starting from the feet up.
position wire into notches at desired height.
PERFORMANCE: The plastic feet on the Wilton cake leveler provide stability to keep an even cut all the way through, making this small leveler perfect....
CARE INSTRUCTIONS: This Wilton cake leveler is dishwasher safe.
however for best results, wash in warm, soapy water before first and after each use.
INCLUDES: 1 cake leveler, dimensions: 12 in (30.4 cm) wide and 6.25 in (15.8 cm) high.

Check Stock

Get Rhythm in Your Feet and Music in Your Soul

✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height.....
✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully....
✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of....
✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/tile/carpeting floors. Comes with separate high density thick felt....
✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2”....

Check Stock

Johnson Level & Tool 1610-2400 Eco-Tech Bamboo Level, 24\

ROBUST LEVELER: A perfect pick for the professionals at work, this leveler features bamboo construction with aluminum gauging edges that promise high durability..
ACCURATE RESULTS: The EcoTech leveler has an EZ clean coating that resists mortar adhesion for unparalleled performance..
SMART DESIGN: The bamboo leveler has curved vials that support extra-smooth bubble travel for accurate readings..
HIGHLY DURABLE: The wood leveler has unbreakable vial windows that add to its lifespan, resisting the abrasive outdoor impacts..
IDEAL APPLICATIONS: The 24 in. Eco-Tech Bamboo Level is ideal for masonry work..

Check Stock

Hyever Adjustable T-Nut Leveling Feet Pack of 8 Furniture Table Adjustable Legs Levelers for Chair Table Cabinet Sliders Protectors for Hardwood Floors

Product Name:T-Nuts Furniture Leg Leveling Feet.
Total Size: 24mm x 24mm x 34.5mm (0.95" x 0.95" x 1.36") (L x W x H).
Load Capacity: 110 lbs per leveling foot.
Package include: 8 x adjustable leveling feet.
Moisture-proof And Anti-corrosive: the thick PT plastic base provides excellent moisture and corrosion resistance that will do keep the furniture legs dry and durable,it can be used as replacement feet or install in wood furniture leg.
Easy To Install: it can be install on funiture leg easily, drilling a hole in the bottom of the furniture leg,and then set the leveler to the level and height you desirable.
It can be provide support, shock proof and balance adjustment for chair,table,desk,wardrobe,cabinet furniture,etc.

Check Stock

Johnson Level & Tool 575 Structo-Cast Line Level, 3\

DURABLE LEVELER: Boasting a heavy-duty Structo-Cast construction for unparalleled performance, the leveler has a durable impact-resistant vial for optimum results effortlessly..
PRECISE DESIGN: The surface leveler features a smart design that reduces the line sag, providing accurate readings every time..
HIGHLY FUNCTIONAL: The lightweight leveler has unrestricted hooks for easy movement on the line, making it conveniently accessible for you..
IDEAL APPLICATION: The heavy-duty leveler is ideal to use for masonry, landscape, and sheet metal work..
PRODUCT SPECIFICATIONS: The 3 in. line level is proudly made in the USA..
Returns will not be honored on this closeout item.

Check Stock