ReviewsLicense Governance Board

Nilight 2PCS Square LED Trailer Light Kit Low Profile Submersible IP68 LED Stop Turn Tail Side Marker License Light for 12V Utility Trailer Boat Camper RV Trucks Marine Snowmobile,2 Years Warranty

  • 7 Full Functions: Combined functions of stop, turn tail light, side marker, side reflector, rear reflector, license plate light. Perfect for 12V DC vehicles with max width of 80 inches. Fit most trailers, boats, trucks, RV, Marine, Pickups, camper, tractors, etc. bus, lorry, van, caravan, snowmobile utility trailers.
  • Brighter and Safe: Employ quality led to draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. 100% DOT Compliance to ensure your safety.
  • IP68 Entirely Submersible: Inside LEDs and circuit board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection.
  • All-in-one Kit: Comes with everything for your straightforward installation, include square lights, amber clearance light, license plate bracket, 25ft length trailer wiring harness, the reflector and the different types of stainless steel mounting hardware. (For hardware instruction, please picture 8).
  • Easy Installation: Light mounting: stud-mounted on the surface design, light with license light on the left, the other on right. Wiring connection: color coded wire, just color to color white to the ground (vehicle frame) ....
Check Stock

License Plate Cover and Frame Combo- Clear License Plate Cover and Stainless Steel Car Tag Holder, Flat Bubble Unbreakable Protector, Fit US Universal Front or Rear Bracket, Mount Screws, Chrome Caps

  • License Plate Frame With Cover- clear flat license plate cover and stainless steel license plate frame kit, is the perfect solution to keep your car number plate Novelty, Cool, Clean. Heavy plastic license plate cover has good toughness, will not crack and deform. Comes in 1 set for the front bumper bracket or back trunk . Make your personalized custom car license plate always bling, spark, good choice of the license plate frame for women, men. 4-hole license plate frame can be stably installed.
  • Heavy Duty License Plate Protector- the unbreakable flat license plate cover is made of high-quality acrylic, clear enough, clear transparent cover is not like black license plate cover, dark license plate cover, It’s legal street. Heavy-duty license plate frame Stainless steel, anti-corrosion, rust, weather resistance.The license plate cover clear has anti-ultraviolet stabilizer to prevent discoloration and cracking, will be durable and have a long lasting use.
  • Universal American License Plate Frame- license plate clear cover and silver metal license plate frame are designed according to the American 12*6 inch standard license plate, suitable for the front and rear license plates of all models, compatible with BMW, Audi, Toyota, Honda, lexus, chevy, etc. The....
Check Stock

Kohree New LED Submersible Trailer Tail Light Kit, 12V LED Utility Trailer Lights DOT Approval, Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer

  • ... like boat trailer, RV, camper, tractors, canoes, truck, trailer, bus, Lorry, Van, caravan, snowmobile etc..
  • FULL SERVICE TRAILER LIGHTS KIT: This utility led trailer light kit has everything you need: 1X Rectangle LED combination stop turn tail light(37 Diodes),1X Rectangle LED combination stop turn tail light with license illuminator(48 Diodes), 2X amber LED marker lights ,25-ft wiring harness(21.65ft wiring harness and 3.93ft wiring harness),license plate bracket and mounting hardware..
Check Stock

BGGTMO Matte Black Aluminum License Plate Frames- 2 Pack Heavy Duty Car Tag Cover for Front & Rear, 4 Hole Rust Proof Universal Holder, Stainless Steel Mount Screws Caps, Inserts, Rattle Proof Pads

  • Heavy Duty License Plate Frame- Black Aluminum Metal License Plate Frame, matte black powder coating surface, Multi-layer protection treatment, ultrasonic rust-proof process, never rust, faded or peeled off, perfect decoration for your black car or license plate. Aluminum metal, light weight, corrosion-resistant, rust-resistant and weather-resistant, to protect your license plate rust proof.
  • 2 Pack Universal Front & Back Plate Frame- This Slim Frame is designed according to the size of USA standard license plate, suitable for all American/Canada 12*6 inch standard/customized/personalized license plates. The 4 corners of the frame are thin, Will not obscure the registration sticker on the 4 corners of license plate, suitable for most states in the United States, ensure legal street. 2 Pack black license plate holders can fit the license plate of the front bumper and rear trunk.
  • Easy To Install- License Plate Mounting Hardware Kit, including stainless steel license plate screws and caps. 2 small hooks on the back of the frame bottom to fix the license plate more stably. M6*20mm (1/4*3/4") license plate screws bolts are suitable for the license plate mount of most models. Stainless steel license plate fasteners can protect the License Plate Rust Proof . B....
Check Stock

ZXFOOG License Plate Frame Cover Kit- Clear Flat Plate Cover & Stainless Steel Car Tag Holder, Unbreakable Novelty Protector Fit Standard US Plate, Mount Screws, Chrome Caps, 1 Pack for Front or Rear

  • Protect Front Or Back License Plate- The combo of license plate shield and car plate frame keep your tag cover plate clean and cool. Heavy duty license plate protectors-Clear license plate shield and stainless steel license plate frame. Novelty Plate Shield is made from acrylic with a UV resistant stabilizer to prevent discoloration and cracking. Car plate cover shield, corrosion proof, rust proof and weather proof. The Unbreakable car license Shield will be durable and have long lasting use.
  • Universal US License Plate Frame- Clear flat License Plate Cover and License Plate Stainless Steel Frame are both designed to Fit over Standard US or Canadian 6x12 Inch License Plate. Thin license plate frame can fully display the registration label on the license plate. Tinted license plate cover , clear enough so they're legal to be on road and you will not be chased by traffic police. Comes in 1 set for the front bumper or back trunk of your car license plates.
  • Includes License Plate Mount Hardware- Our car plate holder and cover are easy to install, All mounting hardware accessories needed are included (Screws Included) and no special tools require. The four mechanical....
Check Stock

Tutor Auto Car License Plate, Electric License Plate Holder for US Universal License(Black)

  • ✅【License Plates Shields And Frames Combo】: Simple and classic design: never goes out of date, cool, simplistic line design looks bright and tasteful, making your car have the sense of fashion and maintain the overall beauty of your car.
  • Flat and Smoked design of license plates cover will protect your license plates better.
  • ✅【All License Plate Accessories】: Packages: 1 x silicone license plate frame, 1 x Smoked license plates covers, 4 x stainless steel license plate screws, 4 x caps and 4 x gaskets.
  • Save your time in finding mounting hardware accessories.Flawless silicone license plate frames include upgraded front or rear license plate frames Tag Holder for Women, Men car owners, Everything you need to get your license plate mounted in a flash! which don’t require any additional installation hardware.
  • ✅【Protection License Plate】: This license plate shield and silicone license plate frame is designed to protect various characters on the license, prevent discoloration, cracking and fading due to weather factor, sunlight, or other factors and keep them looks clean and new.
  • ✅【Universal U.S. License Plate Frame】: Laws and regulations vary from state to state and may be adjusted from time to time, please check local regulations bef....
Check Stock

Aootf Front License Plate Bracket- Universal Front Bumper License Plate Mounting Kit, Car Tag Holder Adapter& Black Aluminum Plate Cover, Anti-Theft Lock Screw Bolt, Caps, For US Vehicle Trailer Truck

  • Front License Plate Mounting Kit- plastic front license plate adapter and Black Aluminum license plate frame, for vehicles with contoured bumpers, mounting front license plates to a trailer or adding an additional novelty plate to any vehicle, or as a spacer recessed into the license plate area at the rear of the vehicle. For those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required.
  • Universal License Plate Bracket- Front license plate holder kit- 6 x 12 inch, suitable for standard novelty US or Canadian license plate mount. Durable and long lasting! 4-hole Aluminum License Plate holder black with slim edges, will not cover the license plate Registration information, legal street. Aluminum alloy material, light weight but strong and durable, durable, anti-corrosion, anti-rust, weatherproof.
  • Includes License Plate Screw Hardware Kit- Easy To Install-all the front license plate mounting hardware is included- plastic license plate bracket, license plate Aluminum frame, stainless steel license plate screws (including anti-theft license plate bolts), inserts nuts, screwdriver , black screw cap covers. No additional hardware is required to install in a flash..
Check Stock

Aootf Anti Theft License Plate Screws- Black Screws for Locking Car Tag, Frame and Cover, Mounting Hardware Kit for Front/Rear, M6 Stainless Steel Screws, Caps, Fasteners Nuts, Rattle Proof Pads

  • Stainless Steel License Plate Screws: Black screws for license plate frame, made of high quality 304 stainless steel, will never rust and corrode. Rust proof license plate screws, the black appearance is oxidation blackening process, not galvanized coating, will not fade. Black license plate fasteners are perfect whether you are looking to get that blacked outlook or just want the screws to match the color of your car.
  • Anti Theft Screws For License Plate Frame: The license plate security screw has a hexagonal design on the head and a thimble in the center. You need to use the anti-theft screwdriver provided in our kit to install and remove these screws. Anti-theft Licence Plate Kit, specially designed to prevent license plate theft. Tamper Proof license plate hardware can securely lock license plate ,frames,covers. Plate screws security keep thieves away, protect car plate.
  • M6 (1/4″) Long Bolts Nuts In Bulk: In the screws bulk kit, we provide M6 screws: 5/8″(16mm) long license plate screws bolts. Metric 1/4″ screws are universal car license plate mounting accessories, suitable for most license plate mounting, including motorcycles, trucks, SUVs, etc. Long screws are suitable for combination installation of license plates, brackets, frames and cov....
Check Stock

BGGTMO Stainless Steel License Plate Frames- 2 Pack Heavy Duty Polished Mirror Car Tag Cover with Chrome Screws Caps, 4 Holes Front & Rear Holders with Fasteners, Inserts, Rust /Rattle Proof Pads

  • Heavy Duty License Plate Frame- car tag frames are made of premium SAE 304 stainless steel, aggressively resists rust, chemicals, petrochemicals, acidic and environmental contaminants such as salt. It is highly polished like a mirror, cool, bling , sparks. It is not discolored like other ABS plastic frames with zinc oxide layer, nor is it aging like silicone frames. License plate frame with chrome screw caps can perfectly decorate your silver license plate, frame, cover.
  • 2 Pack Universal Front & Back Plate Frame- This Slim Frame is designed according to the size of USA standard license plate, suitable for all American/Canada 12*6 inch standard/customized/personalized license plates. The 4 corners of the frame are thin, Will not obscure the registration sticker on the 4 corners of license plate, suitable for most states in the United States, ensure legal street. 2 Pack silver license plate holders can fit the license plate of the front bumper and rear trunk.
  • Easy To Install- Chrome License Plate Frame Screw Caps perfectly match the mirror silver car frames, it is a suitable gift- License Plate Frame For Women, Men! License Plate Mounting Hardware Kit, including stainless steel license plate screws and caps. 2 small hooks on the back of the frame bottom ....
Check Stock

AOOTF Blue License Plate Frames- Cute Car Tag Holders for Women, 2 Pack Slim Aluminum Bracket with Mount Kit Fit Front & Rear, 2 Holes, Personalized Gift Accessories- Screws, Caps, Tire Valve Covers

  • BLUE LICENSE PLATE FRAME FOR WOMEN: Free Blue Design, makes your car personalized, cute, sparkle, glitter! Blue License Plate Holder used No-Fade Spray Paint Technology, make the color always beautiful for span life on a women/girl's car. The surface painting process, improve texture, simple appearance, fine workmanship, smooth edge polishing without injuring the car and hands.
  • ALUMINUM LICENSE PLATE FRAME RUST PROOF: Made of high quality aluminum alloy, it protects against corrosion and rust and it's not easy to be bent. USA Universal License Plate Frame- the frame size is designed according to the American standard license plate, fits all US /Canada 12*6 inch standards/novelty license plate. The slim license plate frame will not obscure the registration label on the metal license plate.Come with 2pcs, can install for both front and back license plate.
  • EASY TO INSTALL: License Plate Frame With Screws can install the license plate in a flash! The kit includes License Plate Mounting Hardware- Stainless Steel License Plate Screws, which can fasten the license plate well and ensure license plate rust-proof. The blue license plate screw caps can cover the head of the screws, which decorates the cute license plate frame very well. 2-hole frame for license p....
Check Stock

License Plate Screws Anti Theft -Stainless Steel Tamper Resistant Locking Front or Rear License Plate Frames Bolts Set,1/4 Metric M6 Security Rust Proof Self-Tapping Screws,Fasteners Nut,Chrome Caps

  • Anti Theft License Plate Cover Screws- Anti theft Screw Made of high grade stainless steel built to last with high resistance to rust and corrosion-Solid!License plate security screw has a hexagonal design on the head and a thimble in the center.You need to use the M6 anti-theft screwdriver included in our kit.Tamper Proof license plate screws can securely license plates,license plate frames or license plate covers,license plate screws security can keep thieves away,protect car plate frame.
  • M6 Self-Tapping Plate Mount Hardware Kit-Car plate screws kit contains 8 anti-theft Self-tapping license screws (Pointed head), suitable for the mounting of front bumper license plate or trunk license plate frame.suitable for the mounting of front bumper license plate or trunk license plate frame.The metric M6 (1/4 inch) (6mm) is Universal Car Accessories,suitable License plate mount for motorcycle screws and many models.20mm ( 3/4 inch) lengths, meet combinations of license plate,frame,cover.
  • Rust-Proof,Stainless Steel Screws Fastener - M6x20mm License plate screws stainless are made of high-quality stainless steel materials, stainless steel license plate screws anti-corrosion and anti-rust, and weather resistant. Personalized, cool, bling, spark. Anti-theft licens....
Check Stock