ReviewsLicense Plate Lights

4 Pieces Aluminum Trailer License Plate Bracket Holder with Light Mount for Trailers Trucks Cars Motorcycles

Size information: aluminum license plate bracket measures approx. 9.5 x 5 x 0.6 inch, the thickness is approx. 1.58 mm, weights approx. 2.30 oz, designed for replacing your plastic license plate bracket.
Detailed information: 2 top mounting holes have 1.5 inch inner and 2.4 inch outer distances, bottom license plate slots have 4 inch inner and 8.5 inch outer distances, bottom section has 0.6 inch offset.
Durable to use: made of sturdy and rustproof aluminum alloy with well-polish surface, the front and back sides of aluminum alloy tread surface are covered with blue film to protect the surface, please peel off the film before installation.
Practical to use: suitable for stud mount lights or combination tail lights and stop lights.
Widely applied: compatible with most trailers, such as motorcycle, boat, transport, construction, snowmobile, etc..

Check Stock

D-Lumina LED License Plate Lights Tag Lamp Assembly w/ Red OLED Neon Tube Compatible with Chevy Silverado GMC Sierra 1500 2500 3500 Suburban Tahoe Cadillac Escalade EXT, 6000K White 2-Pieces

【High Intensity LED Chips】: Built with 100% advanced high brightness LED chips with intensity lighting output and low power consumption, which was 10x brighter than factory light bulbs, give you a larger effective irradiation area and perfect light pattern, dramatically improved the lighting on rear license plate visibility at night. Direct upgrade replacement part to replace the old or defective OEM license plate lights..
【High Quality Performance】: These license plate lights are much brighter than stock lights, 3-row red OLED strips increase safety at night drivinng and give your vehicle more modern look. Built-in high power 18 SMD LED chips, made of high quality PC lens and ABS plastic housing, 6000K white bright lights output maximize illumination and IP66 rated waterproof. Canbus LED control unit design, no error code..
【Easy Installation】: Plug and Play insert to install in just minutes, Non-polarity sensitive, OEM Perfect fit and direct replacement, no need for any resistors or special modifications. Remove original housing bulbs and insert the upgrade version lights plug into the factory socket..
【Package Including】: 1x pair of right and left side LED license plate lights. Product Come with 1 year warranty and lifetim....

Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..

Check Stock

MbuyDIY LED License Plate Light Lamp Assembly Compatible with 2015-2020 F150 17-20 Raptor Smoke Lens 6000K White, Pack of 2

★ High Brightness: Build-in high brightness 18 SMDs LED, 6000K bright output maximize rear end visibility. A pretty good choice to replace the old or burnt out license plate lights.
★ High Quality: Made of premium ABS/PC housing and lens. Waterproof design, energy saving, longer lifetime, no faded with long-time exposure.
★ Easy to install: Non-polarity sensitive, simply Plug & Play. Direct replacement factory license plate lights, no modification or drilling required.
★ Package includes: 2 LED License Plate Lights (Socket is not included).
1 Year manufacturer warranty since order purchase date.
feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period.

Check Stock

LED License Plate Lights Compatible With 1999-2004 Nissan Xterra, 1998-2004 Nissan Frontier OEM Led Number Lamps Replacement 12-SMD White Rear Tag Light Assembly Kit Error Free

✅Application: These xenon white LED license plate lights are designed to fit for 1999-2004 Nissan Xterra, 1998-2004 Nissan Frontier. Replace OEM Part #26510-8B425, 26510-9Z400, B6510-7Z010, 26510-7Z000.
B65107Z010. Provide better visibility for the number tag a popular way to customize the rear lighting..
✅Function: Directly replace the original Nissan Xterra WD22 rear plate lamp, change your yellowish license plate light bulb to this bright xenon white high power light bulb. Improve your Nissan identification and enhance additional safety and visibility at night..
✅High Quality: Super bright 6000K xenon HID white color rear registration plate light bulb, 3-Watt, powered by 12-SMD high power white led diodes with CAN-bus error free decoders, at least three times brighter than your factory rear bumper license plate lamps..
✅Easy Installation: Direct installation, no hassle plug-and-play installation. Just unplug the old incandescent light bulb and insert the new automotive LED Light bulb, fits right into original light housings..

Check Stock

S1000RR Fender Eliminator Kit (2020-Present) US MODEL- New Rage Cycles (Tucked)

Fender eliminator kit cleans up the rear of your bike with a creative design and all the hookups to keep it street safe.
Complete with LED turn signals, brakes lights, license plate bracket, and LED license plate light for a full LED replacement.
Constructed from black powder-coated aluminum for durable reliability with a sleek, clean look.
Tucked license plate bracket keeps your license plate safe from strong winds on the road.
Plug-and-play kit saves you time and effort, provide all the necessary hardware and OEM connectors for a simple installation.
Dimensions (L x W x H): 14 x 12 x 4 inches.

Check Stock

Kuryakyn 2098 Motorcycle Lighting: Rear Position Bullet Style Turn Signal/Blinker Light Bar with Red Lenses and Flat License Plate Support for 1986-2019 Harley-Davidson Motorcycles, Chrome

Allows you to replace your large, stock rear turn signals.
Bullet shaped turn signals with license plate relocation below the taillight.
Built-in light to illuminate the relocated license plate.
Single circuit turn signals equipped with deep-dish bezels and red lenses.
Design of signal bar allows use with curved license plate support if desired (not included).
Includes (1) chrome bar/lights/license plate light assembly, (1) chrome license plate bracket, (1) hardware kit, and (1) connector kit.
Suggested for installation (not included): set of combination wrenches, set of hex wrenches, phillips screwdriver, wire cutter/crimper, soldering iron and solder, and test light.
Compatible with Harley-Davidson models: '91-'13 Electra Glides, '98-'08 Road Glides, '11-'13 Road Glide Ultra, '94-'19 Road Kings (excludes '17-'19 FLHRXS), '91-'96 Tour Glides, and '86-'17 FLST/C/N.

Check Stock

NTHREEAUTO Smoked Brake Tail Lights Motorcycle Taillights with License Plate Light Universal Compatible with Harley, Honda, Kawasaki KFX 400, Yamaha, Suzuki, ATV

【Compatibility】Designed to fit motorcycles with 12v voltage and with the same back plate as the taillight. Compatible with honda, ATV, 86 rebel 450, 94 Honda Magna and Harley..
【2X Brighter Than Factory Light】Built in 23pcs led bulbs for taillight illumination, 2x brighter than halogen bulbs, maximize your rear end visibility at night or rainy days. 5Pcs white led bulbs face down as license plate lights, not only illuminates the road for the drivers in the rear, improve your driving safer, but also meets the US requirements for license plate lights..
【Tail Light Smoked Lens Cover】Made of high quality ABS plastic material, anti-scratch, no faded after long time exposure, water-proof, no water inside after heavy rains.
Smoked lens cover, add features to motorcycle, protect led bulb from water or dirt damage without weakening light..
【Easy Installation】Easy to install, green wire – black negative.
Brown wire – Brake Light and license plate light.
Yellow wire – taillight and license plate light..
【Buy with Confidence】You will get 1pcs taillight. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..

Check Stock

-35º [Explicit]

2PCS 50W 6ohm Load Resistors + 4PCS Quick wire Clip..
Prevent LED Turn Signal Lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard..
NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic..
One resistor is required for each turn signal bulb or each license plate light bulb..
Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary..

Check Stock

AUXMART License Plate Mounting Bracket Front Bumper LED Light Bar License Plate Bracket Holder Fit for Most Trucks, Pickups, SUV, Jeep, 4x4, Cars

Upgrade Lighting Capabilities: This mounting bracket not only helps keep the license plate secure, but also allows you to add some extra off-road lights or other light bars, provides additional lighting source for trail riding or for working in front of your vehicle..
Extremely Durable: Strong steel construction with a durable black powder coat finish to protect against rust..
Multiple Mounting Points: Offers multiple mounting points for installing different types of off-road lights or LED light bar (3"/4"/7"/9"/12"/14"/17"/20")...
Easy Installation: Features a simple, bolt-on design, no welding, drilling or cutting is required. Note: drilling might be required if your car does not have front license plate holes..
Universal Application: This license plate mounting bracket is designed to fit US license plates, compatible with most trucks, pickups, SUV, Jeep, 4x4, cars..

Check Stock

License Plate Frame Backup Camera, Night Vision Car Rear View Camera with 8 LEDs, 140° Viewing Angle Vehicle Reverse Camera, Waterproof Rear View Camera for Cars, SUV, Trucks, RV and More

【Heavy Duty High Quality】: This license plate frame is heavy duty and high quality, it is made of iron, just like other license plate frame mounted on your license plate, securely fixing the license plate without blocking the information of your license plate. It is ideal for all vehicles with standard US license plates. It’s not only a decoration but also offer protection to your vehicle..
【140° Angle Design】: A macro lens with a mirrored angle of view gives you a wide field of view. It helps you check the hidden blind spot clearly and reduce the potential dangerous, making your parking safe and easy. There are eight LED lights and the license plate camera built high sensitive color image sensor. You can park without worrying about it no matter it’s day or night..
【IP68 Waterproof and Shockproof】: This license plate frame backup camera is with IP68 standard waterproof, shockproof and dustproof, the reverse camera will not get wet or fogged even in rainy days or snowy days. You can drive in hot days, cold days or extreme bad weather. The camera can tolerate high temperature and low temperature, provide a long service life for this license plate frame..
【Intelligent HD Processing】: This night vision car rear view camera has an import....

Check Stock