ReviewsLid Stay Hinge Gas

Heavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Keep Lid Hinge Open, Perfect for Cabinet, Kitchen, Wardrobe Toy Chamber Max Support 50lb/2pcs

  • LID SUPPORT HINGE USAGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required..
  • KEEP THE LID OPEN— The lid hinge will hold the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • WEIGHT CAPACITY 50LB—Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)

  • STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch..
  • EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation..
  • LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors

  • LID STAY HINGE ROTATE ONE WAY TO LOCK LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on..
  • SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70°..
  • WEIGHT CAPACITY– 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs..
  • DURABLE HEAVY DUTY HINGE--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical..
  • EASY TO INSTALL ONLY 5 MINUTE–Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions..
Check Stock

Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2

  • LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING ---Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated install instructions can be downloaded in Amazon page. Easy to follow installation instructions ensure a perfect....
Check Stock

Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs (APFFSY)

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the....
Check Stock

RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

  • DURABLE LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function..
  • SOFT CLOSE LID STAY---Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
  • MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side..
  • WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe..
  • EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package..
Check Stock

Heavy Duty Hinge with Soft Close 50lb/2pcs Folding Lid Stay Hinge for Cabinet, Kitchen Wardrobe Toy Chamber

  • WIDE USAGE LID SUPPORT HINGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • KEEP THE LID OPEN — The lid hinge will hold the lid open until you want to close. Never worry about having to support the lid anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • WEIGHT CAPACITY—Max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Toy Box Hinge Soft Close, Lid Stay 105 Degree Open Safety Slow Close Hinges Support Toy Chest for Upward & Top-Opening Flap Doors Pack of 2

  • SLOW & SOFT CLOSE HINGE¡ªLid stay will make door and lid will close slowly and softly to reduce the impact. Which can prevent noise or smashing fingers. Lid stay torsion hinge support toy box lid and kitchen cabinets..
  • DURABLILITY LIDS¡ªMade of high quality alloy and plastic, with strong corrosion resistance and durability. Long lasting and durable..
  • COMPACT U-SHAPE SNAP DESIGN¡ª Hinge allows the lid to open at an max angle of 105 degrees. Special u-shape design is to prevent the case or door from sliding off when opened. Lid let your baby safety and reliable..
  • EASY INSTALLATION¡ªLid support hinge Can be assembled left and right, support weight capacity is 12-22 lbs. Only follow up instruction of soft close hinge, you will make lid work well..
  • WORRY-FREE WARRANTY¡ªWe offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don¡¯t hesitate to contact us, we will serve you until your satisfaction..
Check Stock

Bench Seat Hinge for Toy Chest Heavy Duty No Slam Safety Torsion Hinge Lid Support Stay Hinge

  • 2 in 1 HINGE AND LID STAY/SUPPORT HINGE in 1 piece. No metal visible on outside of your toy chest or bench.See installation images..
  • HIGH RAISING: This metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly..
  • HEAVY DUTY: Maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks..
  • SAFE AND SECURE: This soft close hinge is specially designed to prevent pinched fingers, so it will never slam shut to your child. This specially manufactured lid support won't let the lid fall..
  • BUILT-IN FEATURE: This metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming on fingers. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening..
Check Stock

QWORK Heavy Duty Lid Stay Hinges 40lb Folding Lid Support Hinge Ideal for Cabinet,Closet ,Wardrobe and Toy Box 2 Pack

  • Durable: Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance:....
  • Random Stay: QWORK lid stay hinge allows you to keep your lid stay at any angle to your needs. It will not slam shut when the lid stays open..
  • Adjustable for Different Weights: The support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set....
  • Easy to Install: Our lid stay allows you to keep it installed for 75° and 90° opening. The hinge is used for side-mounting and top-mounting. Mark....
  • 100% Satisfied Service: Each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our....
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 60” Pound Lid Support Hinge Soft Close Cabinet Hardware – Bronze Lid Hinge Support - Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding more hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of heavy duty hinges ensure that the seat top raised position is at an over center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock & are easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps on furniture, cabinets, cupboards, or wooden storage boxes when a soft closing is required. hinges are available ....
Check Stock