ReviewsLight Bar Roof Mount Hilux

Wind Fairing for Rack / 1475mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Rack / 1165mm/1255mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Rack/ 1345mm/1425mm (W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1267mm (49.9") L x 2.5mm (0.1") W x 176mm (6.9") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Bike Handlebar Storage Bag, Waterproof Bicycle Pack, Perfect for Holding Accessories, Professional Off-Road Cycling, Mountain Biking, Gravel and Road Bikes (Great Smoky Mountains)

  • 1.Easy installation-pre-drilled hole, allows more lights to be added on vehicle without drilling any holes in the bodywork, allen hex key included for quick installation to your roof rack, bull bar, roll cage, or headache rack..
  • 2.Wide uses- this LED light bar mounting bracket can be used on tubes of 0.75", 0.875“, 1.125",1.25” Bar mount in diameter, work with most LED, HID, halogen spotlights/fog lights/driving lights or light bars for off-road vehicles, ATVs, UTVs, trucks, Jeeps, boats, farm vehicles etc..
  • 3.Universal adjustable Tube clamp and Light weight Small Size.
  • 4.Material- Heavy duty die-cast aluminum, strong and durable, with rubber inserts dampen driving vibration and avoid scraping bull bar surface.
  • 5.Quality guarantees- 2-Year Warranty, you can get a full refund or a new replacement.
Check Stock

PartsPro Meyer 6 Ram Replacement

  • UPGRADED -- ASPL Roof top strobe light bar use 48 high-intensity LED chips with magnifying lens to maximize light output and ensure more effective....
  • EASY TO INSTALL -- 2 x 7 strong magnets with larger thick rubber suction cups, more stable than other 2 x 5 magnets. Very quick to mount without....
  • FLASH PATTERN -- Double switch buttons setting, 16 Patterns to choose from. You can switch ON/OFF or select the flashing mode conveniently at the....
  • HIGH PERFORMANCE -- Integrated heatsink, and anti-condensation drain port, good improved the problem of water vapor condensation inside the light.....
  • SERVICE -- If any questions, please feel free to contact us by email.And we offer 2 YEARS warranty.If it is defective, we will full refund to you Or....
Check Stock

ASPL 49.2'' 102 LED Strobe Lights Bar Double Side High-Intensity Flashing Waterproof Emergency Warning Flash Lights With 28 Strong Magnets for Tow Trucks Pickup Snowplow Vehicles

  • 【SUPER VISIBILITY】 This 49.2 inch light bar features 18 LED modules with a total of 102 high power LEDs. TIR optic lens provides 360° lighting coverage during midnight, rainy or foggy days, bright enough to be seen more than 2000ft in distance. It is even visible during daytime conditions, Brighter and more effective than standard LED strobe lights..
  • 【20 FLASHING MODES】 The controller has 5 buttons. You can handy switch on/off, quickly select the direction mode, and change the mode. You have 20 modes that will ensure you find something to suit your wishes and needs. Come with the last pattern recall / memorized function..
  • 【EASY TO INSTALL】 The light can be magnetically mounted or permanently mounted with screws. 4 x 7 strong magnets with larger thick rubber suction cups, more stable than other 4 x 4 magnets (Test go up to 80mph but not fall off). Very quick to mount without hurting the roof of your vehicles, as well as adding strength on attachment. 15.7 ft heavy-duty cable, long enough to install the light anywhere in the vehicles..
  • 【HIGH QUALITY】 The 49.2" Emergency Warning LED Strobe Light Bar ....
Check Stock

AA-Racks 2 Pair Stainless Steel J-Bar Rack Roof Top Mount with Ratchet Straps, Ratchet Bow and Stern Tie Down Straps & Anchor Straps, Folding Carrier for Your Canoe, SUP and Kayaks on SUV Car Truck

  • UNIVERSAL FIT: Our kayak carrier will fit most automobiles that have a roof rack including round, square, oval, and flat crossbars - Best for transporting your kayaks, canoes, surfboard, paddleboard, and all similar sized aquatic vehicles - Our kayak carrier for roof rack will only fit vehicles WITH roof rack bars.
  • DURABLE DESIGN: Constructed from sturdy steel to hold heavier boats - Water-resistant so it will prevent rusting and hold up against rain, snow, and other elements - Even though the J-Bar mount is made from steel, it’s lightweight which makes it easy to install and remove.
  • 2 PACK: Dual mounts safely hold one (1) kayak - Features two (2) padded J-Bar cradles, tightening knobs, carrier straps, and bow-stern straps to safely mount to your automobiles roof rack - All necessary hardware is included and NO TOOLS ARE REQUIRED..
  • GUARANTEE: Includes a one (1) year limited warranty..
Check Stock

Lattofigy 56LED 16\ Roof Top Mini Strobe Light Bar Magnetic Mount Emergency Safety Warning Caution Flashing Beacon Lights for Construction Vehicles Snow Plow Tow Trucks Postal Mail Cars (Amber White)

  • 【SUPER BRIGHT】This 16-inch strobe light features 14 modules and a total of 56 high-intensity LEDs are built in. According to the principle of optics, we have designed an upgraded version of the lens to increase the light output more effectively. It provides 360-degree of superior visibility during the day or at night..
  • 【LONG LIFESPAN】Made of durable PC housing, completely waterproofed, strong fog penetrability and dust-proof and corrosion resistant. IP67 Waterproof Rate. Able to withstand harsh weather conditions. Over 50,000 hour lifespan. 2 YEAR WARRANTY!.
  • 【EASY INSTALLATION】16ft straight power cable, long enough to mount the light bar anywhere on your vehicle. 2 rubber suction cups with a total of 14 strong magnets, place directly on the roof of the vehicle, very quick to mount without hurting the roof of your vehicles.(Note that magnets do not work on aluminum roofs.).
  • 【17 FLASH PATTERN】First button for easy power on/off. Second button to change between 17 different flashing patterns. Last used pattern recall/memory function..
  • 【WIDELY APPLICATION】Fit for tow trucks, pickup trucks, dump trucks, snow plows, rural mail carrier vans, construction vehicles, security guard patrol vehicles, oversize load vehicles and volunteer per....
Check Stock

Tube clamp 3Inch LED Light Bar mounting Bracket Bull bar Nudge bar mounts clamp kit Adjustable for Off Road SUV ATV Truck Motorcycle Boat 2PCS …

  • [ Solid & Durable ] The tube clamp made of aluminum alloy, which is light-weighted, shockproof and rust resistance, add more light on your vehicle, make it looks more fresh..
  • [ Durable rubber gasket ] The roof roll cage clamp comes with rubber gasket will protect your bull bar from scratching , reduce shaking, it is really sturdy..
  • [ Different Installation ] The Led light bar mounting bracket has 2/2.5/3 inch-3size, perfect suits for standard size 2/2.5/3 inch mounting brackets, bull bar, round tube, roof roll, roll cage, tubular bar, horizontal bar etc..
  • [ Wide Application ] Universal fit for all LED Pods, LED Cubes, Work Lights, Fog Lights, Driving Light, LED Light Bar etc, wide application..
  • [ Universal Fitment ] The universal bull bar roll cage clamps led bar mounting brackets can apply to most Pickup, SUV, Truck, Motorcycle, UTV, ATV, off road and other vehicle with different size of tubular bar, bull bar, roll cage etc. Any problem please feel free to contact us, 24 Hours Online Service..
Check Stock

V-SEK 27' Waterproof Amber/White Warning Emergency Strobe 64 LED Light Bar Rooftop 16 Flashing Pattern Traffic Advisor Magnetic Bases for Tow Truck Vehicle Snowplow

  • 56” HIGH POWER SUPER BRIGHT LED AMBER WARNING LIGHT BAR WITH CLEAR LENSES, Latest generation super bright 104 LEDs, 1 watt, 100,000 hour. There are 8 groups of lights and each group has 4 LED diodes..
  • 39 front flash patterns and 3 rear traffic director flash patterns. Two RED Brake Signal Light, Two WHITE Cargo Light, Two WHITE Front Take-Down Lights, All Other Lights are Amber Color..
  • Multi Function Flash Patterns – Tri-Directional Traffic Director at the rear side. Take-Down Lights & L & R Alley have three modes: lights on steady, flashing or off..
  • Two red lights on the lightbar can be used for Brake & Side Marker/Tail & Turn signal lights, activated by a separate wire..
  • IP67 or higher dust and moisture resistance, 10 G-force shock, vibration resistance designed to resist daily punishment. Adjustable no-drill roof mount with roof hooks/brackets and hardware..
Check Stock

Off-Road Light Bar Mounting Brackets LED Light Horizontal Bar Tube Clamp Fit on 0.75"/1"/1.25" Bull Bars Roof Racks Roll Cage Holder for ATV UTV Truck, 2-Pack

  • 1.Easy installation-pre-drilled hole, allows more lights to be added on vehicle without drilling any holes in the bodywork, allen hex key included for quick installation to your roof rack, bull bar, roll cage, or headache rack..
  • 2.Wide uses- this LED light bar mounting bracket can be used on tubes of 0.75", 0.875“, 1.125",1.25” Bar mount in diameter, work with most LED, HID, halogen spotlights/fog lights/driving lights or light bars for off-road vehicles, ATVs, UTVs, trucks, Jeeps, boats, farm vehicles etc..
  • 3.Universal adjustable Tube clamp and Light weight Small Size.
  • 4.Material- Heavy duty die-cast aluminum, strong and durable, with rubber inserts dampen driving vibration and avoid scraping bull bar surface.
  • 5.Quality guarantees- 2-Year Warranty, you can get a full refund or a new replacement.
Check Stock