ReviewsLight Circuit Board

LED Boat Strip Lights, 32.8FT Marine Pontoon Led Lights, Waterproof Boat Interior Light, Under Gunnel Lights, Boat Deck Light, Night Fishing Lights, Good for Pontoon Bass Fishing Yacht Kayak (Green)

  • ...0 green LEDs are evenly embedded on the 10m(32.8ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural..
  • 【Flexible Design & Easy to Install】: The Lights Using flexible copper circuit board, you can gently bend it, Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along the cutting marks to fit for your project, great for DIY. The light strip comes with strong 3M back adhesive, mounting clips to help keep the boat light strip stay in place..
  • 【Safe & Waterproof】: This LED strip light is fully covered with water-resistant glue. Waterproof rating is IP65, It can withstand the rainy and snowy weather and protect LED from damage, greatly extend the life of the strip lights to 50,000 hours or more. LED strip with operating voltage of 12V, low heat, no radiation, no flicker, harmless to the human eye, it can be touched by children..
  • 【Widely Application】: The lights are widely used for boat interior light, cockpi....
Check Stock

LED Boat Strip Lights, 32.8FT Marine Pontoon Led Lights, Waterproof Boat Interior Light, Under Gunnel Lights, Boat Deck Light, Night Fishing Lights, Good for Pontoon Bass Fishing Yacht Kayak (Blue)

  • ...50 blue LEDs are evenly embedded on the 10m(32.8ft) double-layer pure copper FPCB Board and give out beautiful blue light. High-density 60 LEDs/M design makes luminescence more even and natural..
  • 【Flexible Design & Easy to Install】: The Lights Using flexible copper circuit board, you can gently bend it, Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along the cutting marks to fit for your project, great for DIY. The light strip comes with strong 3M back adhesive, mounting clips to help keep the boat light strip stay in place..
  • 【Safe & Waterproof】: This LED strip light is fully covered with water-resistant glue. Waterproof rating is IP65, It can withstand the rainy and snowy weather and protect LED from damage, greatly extend the life of the strip lights to 50,000 hours or more. LED strip with operating voltage of 12V, low heat, no radiation, no flicker, harmless to the human eye, it can be touched by children..
  • 【Widely Application】: The lights are widely used for boat interior light, cockpi....
Check Stock

Balboa 10-175-3005 Circuit Board, VS501Z, 54357-03

  • Replacement Balboa circuit board for the VS501Z spa controller model.
  • OEM part number for circuit board is 54357-03.
  • Board features: pump 1 dual speed, blower/pump 2 single speed, ozone, circ pump.
  • Circuit board dimension (approx.): 11 inch x 5 inch.
Check Stock

Rear Circuit Board Paddles PCB Button Board with Ribbon Cable for Xbox One Elite Wireless Controller

  • Replace the damaged or defective circuit board paddles.
  • Package includes: 1 x Circuit Board Paddles & 1 ribbon cable.
  • Type: Xbox One Elite Paddle Switch Board.
  • Product Name: Replacement Rear Circuit Board Paddles for Xbox One Elite Wireless Controller..
Check Stock

Linkitom New Halo Rectangle Submersible LED Trailer Light, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80\ Inch

  • Set of 2 pack(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), designed for 12v system. left light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker and License Illuminator, right light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker.
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
  • Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
  • Easy to instal, The distance of two studs bolts is standard 2”, Direct replacement for your original incandescent bulb unit.
  • Widely Used : Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater..
Check Stock

Autel PowerScan PS100 Power Circuit Probe Kit with 40ft Cable, 12V 24V Automotive Circuit Tester, Car Electrical Diagnostic Tool, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test

  • 【2023 ALL-IN-ONE POWER CIRCUIT TESTER KIT---ACCURATELY】Autel PowerScan PS100 is most accurate power circuit probe tester yet, with 160x128 TFT display test all 6-30 volt vehicle electrical systems. Autel PS100 supports voltage&polarity test, continuity test, signal circuit test, components activate, check bad grounding, locate short circuits, circuit breaker protection, etc. Intuitive interface with ergonomic design makes PS100 be best gift for all novice drivers or pro circuit repairers..
  • 【FOUR WORKING MODE---INTUITIVE&EASY】Four working modes make circuit detection more simple:DC Voltage, AC Voltage, Resistance, Tone On/ Off. DC Voltage mode can read DC voltage with 0.1V resolution.
  • AC Voltage can read Max & Min voltage, frequency and duty cycle quickly.
  • Resistance mode can read resistance between tip and auxiliary ground wire. Unique Tone On/Off Design is really useful when working in bright areas, it can judge the circuit voltage according to the volume of the sound..
  • 【COMPONENT ACTIVATION】The component activation feature is specially designed to troubleshoot on/ off-board electrical equipment. By activating the signal generated by th....
Check Stock

Liftmaster Garage Door Opener Replacement Circuit Board for Security+ Systems

  • Replacement Logic/Circuit board (receiver board) for ALL Security+ operators (no light socket)..
  • For Liftmaster garage door opener operator models 985, 1240R, 1245R, 1246R, 1255R and 1256R. For Chamberlain garage door opener operator models 4200, 2200 and 1200..
  • Replaces logic board models 41A5021-1, 41A5021-1B, 41A5021-1C, 41A5021-1D, 41A5021-1E. Compatible with Security+ systems from Chamberlain, Craftsman,Master Mechanic, Sears & Wayne Dalton..
Check Stock

Upgraded 3-72V Automotive Test Light, Heavy Duty Digital LED Circuit Tester with Voltmeter and Dual Color Polarity Indicate Light, Bidirectional DC Voltage Tester Electric Light Test Pen with Buzzing

  • [3-72 V Wide Testing Range] This professional automotive circuit tester light with 3-72V DC voltage testing range, widely and ideal for checking various vehicles¡ electrical circuits, automotive headlights, taillights, turn signal circuits, faulty sockets, fuse connections, also for testing other 3-72v DC wirings and circuits..
  • [Buzzing Bidirectional Voltage Testing Mode] You can attach the alligator clamp either to negative or positive ground, there are two light emitting diode on the circuit board for polarity indication, red light indicates positive polarity and green light indicates negative polarity, and one sound buzzing for positive and double sound for negative..
  • [Computer Safe Accurate LED Digital Reading] Digital LED voltage display for accurate volt readouts, .1 v resolution ratio with high accuracy. Compared with LCD, clear&visible LED reading display for day and night. LED circuits board with micro current than traditional test lights, more secure and burn-resistant to automotive computer board..
  • [Quality Made & Anti-lost Needle Cover ] Sharp stainless steel probe for piercing wires, also for hard to r....
Check Stock

BRECKWELL Circuit Control Board Panel P20 P26 P23 P23i P24 P24i A-E-301

  • Breckwell Circuit Control Board Panel Module, P20, P23, P23i, P24, P24i, P26, P32i, P2000, P2000i, P2700, Part# C-E-301 | A-E-301.
  • Replacement digital 4 RPM circuit board / control panel for most Breckwell pellet stoves made before 2002. Fits the following Breckwell pellet stove....
  • Genuine Breckwell OEM Replacement Circuit Control Board.
  • Guaranteed Newest Stock and Latest Inventory.
  • Please ensure you require this control board prior to ordering. We are unable to return circuit boards that have been installed or used in anyway. Be....
Check Stock

Dometic (3316348.900) Power Module Board

  • CIRCUIT BOARD – Circuit board designed for RV refrigerator..
  • EASY FIX – Replace your circuit board and spare yourself the expense of buying a new refrigerator..
  • DESIGNED TO FIT – Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)..
  • WARRANTY – Comes with full manufacturer warranty..
  • LIGHTWEIGHT – Weights less than 1 pound..
Check Stock

PANAVISE 324 Electronic Work Center

  • Includes a 315 Circuit Board Holder, a 300 Standard Base, a 312 Parts Tray Base Mount, and a 371 Solder Station.
  • Circuit Board Holder Tilts 90 degrees, Turns 360 & Rotates 360.
  • Single control knob and exclusive split-ball locks the Circuit Board Holder firmly into place.
  • Height: 13.5-Inch (342.9mm) Weight: 4.5 lbs. (2kg).
Check Stock