ReviewsLightweight Puller Tool

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

  • [Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
  • Lightweight dent puller slide hammer tool ensures maximum pull power.
  • [Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
  • 3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
  • [Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
  • Then, pull back on the T handle, while you snap the weight towards the handle.
  • Weighted slide hammer adds torque and pull-power.
  • [Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
  • [Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....
Check Stock

Zenith Industries ZN700001 Trim Puller Black

  • THE ORIGINAL PATENTED TRIM PULLER IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing....
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated....
  • THE AUTHENTIC, REVOLUTIONARY, TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or....
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering....
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to....
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Dent Puller Kit, 56pcs Paintless Dent Repair Kit with T-bar Dent Puller, Double Pole Bridge Puller & Hot Glue Gun, Dent Removal Kit for Car Refrigerator Motorcycle Minor Dent and Deep Dent Remove

  • Paintless Dent Repair Kit: It is entirely paintless dent removal, The T-bar dent puller and double pole bridge puller are made of tempered high-carbon stainless steel and standard stainless steel, in the parts of the body contacted by the high-quality rubber, and the hot melt can be wholly removed without damaging the original paint. Tips: Recommended for cars with original paint, we are not recommended to use the repair kit if your paint gets damaged before you repair the dent.
  • Easy to Use: The dent puller kit is suitable for both professional and green hands. Using the principle of leverage to design the dent puller is ergonomic, easy to use, and can pull out dents easily, most of the dents can be removed within 30 minutes. Also, we offer detailed manuals to guide you, please don’t hesitate to contact us if you need help..
  • Widely Used: T-bar dent pullers come with 2 different puller lines. For big dents, you can use the puller lines to assist. For small dents, you can use the small blue glue tabs. Meanwhile, The remover can be detached into a short T-bar puller, with 25 glue tabs. Newest double pole bridge dent puller, You can insert the blue spacer directly, also insert the black spacer directly. Simpler and more versatile! 30 pcs different shape ....
Check Stock

AMESEDAK Weed Puller Tool, Stand Up Weeder Manual Weeding Tool with Long Handle, Stand up Heavy Duty Garden Weeding Tool, 39" Long Handle Weed Remover Tool with 3 Stainless Steel Claws for Garden

  • ... common kinds of soil, for hard soil need to be used carefully to avoid breaking)..
  • 【Ergonomic Design】The 39-inch long-handled Root Removal Tool fits most people's height, eliminating knee soreness from bending and back pain from stooping. Weed puller tool is also lightweight, making it suitable not only for young people but also for grandparents and other middle-aged and elderly people, ensuring enjoyable gardening with this weeding tool..
  • 【Efficient & Easy To Use】To weed with this stand up weeder, simply keep your body upright, push prongs into the root system of a weed with your foot and rotate the handle 180 degrees to remove the weed, roots and all debris! Then, just push on the thumb release to eject the weed plug from the pointed tines. This is very useful for composting and eliminates cleanup. This garden tool is efficient and best of all cost-effective..
  • 【Widely Used】Our weeder tool has scientific and reasonable weeding design, easy prying and perfect for removing dandelions, thistles, flowers and other types of weed. A great tool for your garden, backyard and front yard landscaping..
Check Stock

NMAZA 3 Jaw 10 Inch Hydraulic Gear Puller 10Ton Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case

  • 【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements.
  • 【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility.
  • 【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage.
  • 【EASY TO USE】-Easy to carry and operate, portable structure is easy for carrying and operation.
  • 【WIDE APPLICATION】: This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings.
Check Stock

Trim Puller Tool for Baseboard,Wood Trim Removal Tool for Floor Tile,Molding,Flooring,Siding, Trim Puller with 2PCS Noise Reduction Cover

  • 【HARDENED STEEL TRIM PULLER TOOL】This Baseboard Removal Tool is made of hardened High-strength forged steel, Black matt coating, anti- rust and corrosion,can resist repeated heavy leverage well..
  • 【LABOR-SAVING DESIGN 】 The trim puller tool for baseboard is with sharp edge can be easily driven into the seam of tiles ,baseboards and flooring without damaging the walls and floor, 15 degree wedged center design enables your removal work more efficiently.it can competent with the work of the crowbar, trim bar and wrecking bar..
  • 【Ergonomic Handle】The trim puller is molded with EDPM rubber handle, anti-slip pattern design provides exceptional shock-absorbing , prolonged handle easy to grip , time and strength saving..
  • 【MULTI-USE TOOL】This Tile Removal Tool with nail puller is Multi-function home improvement tool can be widely used in removing molding,door window decorative Panel ,carpet tack strip, glued countertops and other home renovation work..
  • 【NOISE REDUCTION COVER】The trim removal tool equipped with 2pcs noise reduction cover ,which protect you from hearing hurts specailly when you work long time in tile removal,molding trim ,kitchen remold or other home improvement work..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment, Sheppard M110 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10389

  • Tiger Tool's 10389 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M110 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment, Sheppard M100 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10385

  • The Tiger Tool 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

YOTOO Bearing Pullers Set 5 Ton Capacity, Bearing Separator Kit

  • HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool..
  • COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs..
  • VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully..
  • WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals.
  • WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us..
Check Stock