ReviewsLine Inputs

Tascam US-16x08 Rackmount USB Audio/MIDI Interface

  • Captures 16 mic and line inputs to your computer with clear sound quality and advanced features to manage big sessions.
  • Eight Ultra-HDDA microphone preamps deliver the cleanest and quietest operation in their class while delivering up to 56dB of gain.
  • An additional eight line inputs are provided, two of them switchable to instrument level for direct guitar or bass recording.
  • Eight balanced line outputs are also available, two with a level control on the front panel for monitoring.
  • Built in is a DSP Mixer for low-latency digital mixing, and each channel has four-band EQ and compression for polished-sounding monitor mixes.
Check Stock

Rockville RockMix 5 Channel Pro Mixer Bundle with Rockville ROCKSHIELD 3 Mic Isolation Shield & Rockville RCM PRO Microphone & Rockville PRO-M50 Studio Headphones & Rockville RVES05 Stand (5 Items)

  • ...nes and turn each zone on or off. When both zones are playing it WILL play in stereo, Built in Bluetooth with 35 Foot range, USB input will play music files from a thumb drive or hard drive.
  • SD card playback will play music files stored on a memory card,Precision tuning with metal knobs,Mic mixer: 3 front microphone inputs with volume, tone, and echo control,Additional 2 rear mic inputs,Adjustable bass and treble music control,Adjustable bass, mid, and treble mic controls,Delay and repeat effect controls,Sets of RCA line/REC outputs,Set of RCA mic outputs,Removable 19” Rack mount brackets make this perfect for tabletop use or for rack mount applications.
  • Full function remote gives you easy access to all the important features, Built in pre-amplifier, Built in FM radio with manual tuning, and auto-scan, Built in quiet cooling fan, Bright blue LED display, Perfect for karaoke, DJ, KJ, home, and commercial applications, Rugged metal housing, 110V use only, Unit weight: 17.6 lbs (8 kg), Shipping weight: 22 lbs (10 kg), Unit dimensions: 16.9 inch x 13 inch x 5.1 inch.
  • Specifications: RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2), RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2), Peak @ 4 Ohm at 10 % THD: 2,000 Watts Peak (1000 x 2), Peak @ 8....
Check Stock

California Project

  • ...rain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
  • Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professi....
Check Stock

Sound Storm EV5000D Car Amplifier – 5000 Watts Max Power 1 Ohm Stable Class D Monoblock MOSFET Power Supply Remote Subwoofer Control

  • POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Monoprice LC200 Large Multi-Pattern Studio Condenser Microphone with 34mm Capsule Shock Mount and Hard Carrying Case - Stage Right Series

  • XLR & 1/4" mic inputs, RCA stereo line inputs, RCA stereo line out.
  • Emergency trigger all off except for Mic 1 + Mic ducking (auto attenuation of line ins when mic is in use).
  • 70/100V allows numerous speakers to be connected without complicated impedance calculations.
Check Stock

Mackie Thrash, 15-Inch 1300W Powered Loudspeaker, Black, (Thrash215)

  • Built-Like-A-Tank to conquer every gig while lightweight for easy loading.
  • Frequency response: 38Hz – 20kHz (-10dB).
  • Inputs 1 and 2 feature XLR/TRS combo inputs. Inputs accept both line and mic level.
  • Mix output contains audio from both input channels.
Check Stock

BOSS Audio Systems AR1500M Car Amplifier - 1500 Watts Max Power, 2 4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db..
Check Stock

Technical Pro Professional 2 Channel USB Bluetooth DJ Mixer Controller with AUX, 2 USB, microphone & headphone Inputs

  • 2 CHANNEL: This portable professional wireless 2 channel Dj mixer machine by Technical Pro is the perfect way to easily mix audio from MP3 and bluetooth connected devices. Each channel has its own independent volume controls and cross fader.
  • DJ CONTROLLER: The Dj mixer audio streaming system has Aux inputs switchable between line level and phono input. The inputs for channel 2 are for turntable connection and the LINE inputs may be used for connecting tape decks, CD or MD player.
  • BLUETOOTH MUSIC STREAMING: This Mixer is compatible with bluetooth and works with latest devices like smartphone, tablet, laptop, pc w/ simple hassle free pairing. Wirelessly stream music like Pandora / Spotify from your device directly into your mix.
  • USB INTERFACE AND MIX MONITORING: This personal mixer has a USB port to connect to a computer and use it as an audio output and input interface for playing & recording and 3.5mm jacks for microphone Input & mix monitoring via headphones.
  • INPUTS: Pyle mixer is equipped w/ AUX, 2 USB, microphone in, and a USB flash drive reader. It also has a ¼" headphone jack. Produce highly creative remixes which is perfect for dj party / music recording.
Check Stock

Zoom LiveTrak L-20 20-Input Digital Mixer and Multitrack Recorder with ATH-M50x Headphone and Accessory Bundle 4 Items

  • Bundle Includes: Zoom LiveTrak L-20 Digital Mixer, ATH-M50X Professional Studio Monitor Headphones, 25Ft XLR Cable Male to XLR Female Microphone Cable and 32GB Ultra SDHC UHS-I Memory Card.
  • Ergonomics: LiveTrak L-20 is designed to mix bigger. It features 20 inputs (16 mono mic/line inputs and two stereo inputs), all with independent 3-band mid-parametric EQ.
  • Create Six Custom Monitor: With six independent monitor outputs for musicians, each output can have its custom mix, complete with effects, that can easily be switched from powerful headphone output to a balanced line output for stage monitors.
  • One for the House: Features a dedicated 7th output for the FOH engineer. The sound engineer can monitor the main mix and any of the sub-mixes, thus adjusting them to the musicians’ satisfaction.
  • Audio Interface Mode: Lets you route inputs to any DAW or streaming software, even while recording to an SD card. Additionally, audio can be routed from your computer into the L-20 to be mixed with your live performance.
Check Stock

Rockville RPG2X15 Powered Bluetooth Mixer+(2) 15' Speakers+Stands+Wireless Mics

  • ... and one speakon jack. Two 10ft speaker cables (1/4 to ). Rubber feet protect the enclosures. Maximum SPL : 112dB. Input connections : Two 1/4" jacks in parallel. Two 10ft speaker cables. Powder-coated steel grill. Mixer : 8 Channel Powered Mixer with 1400 watt amplifier built in Built in Bluetooth connectivity. 17 Inputs!.
  • 2 Speaker outputs and line output to connect a subwoofer or more speakers. USB / SD Input. MP3 Playback. LCD Display. Bluetooth connectivity. 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 8 balanced XLR and microphone inputs. Tape/CD Line inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control.
  • Phantom power for condenser mics!. 5 Band graphic equalizer. Line Out for connection to external amplifier. Return input for connection of external effects processors. Record Out for taping. RF interference protection on all inputs. Aux Send Output : -10 dBv nominal, 1k ohms. Tape Rec Output : -10 dBv nominal, 1k ohms. Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization : +/- 15 dB @ 5 kHz.
Check Stock

Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power 2/4 Ohm Stable Class A/B Mosfet Power Supply Remote Subwoofer Control

  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock