ReviewsLine Laser Module

Gxcdizx New DVD Disk Drive Replacement for Nintendo Wii U RD-DKL034-ND

➤ Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module Replacement for Nintendo Wii U.
➤ Fitment: for Nintendo Wii U (Please check your machine model before your purchase).
➤ Tips: This is Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module replacement to replace your old damage Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module, don’t include instructions, please install it by a professional technician..
➤ Please contact us if you received the part damaged or if the part you ordered did not fix your problem.We would like to ensure 100% customer satisfaction for you..
➤ Package contents: 1x Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module for Nintendo Wii U.

Check Stock

Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)

Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module.
Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use..

Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..

Check Stock

Gxcdizx RD-DKL034-ND Internal Disk Drive Replacement for NES WIIU Game Console DKL101-ND DKL034-ND 102-ND

➤ Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module Replacement for Nintendo Wii U.
➤ Fitment: for Nintendo Wii U (Please check your machine model before your purchase).
➤ Tips: This is Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module replacement to replace your old damage Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module, don't include instructions, please install it by a professional technician..
➤ Please contact us if you received the part damaged or if the part you ordered did not fix your problem.We would like to ensure 100% customer satisfaction for you..
➤ Package contents: 1x Disk Rom Drive Box Laser RD-DKL034-ND Deck Flex Cable Module for Nintendo Wii U.

Check Stock

20W Laser Module Kit for 3018 CNC Router Machine, IKLESTAR 5.5W Optical Power 12V 450nm Laser Head for 3018 Pro/3020 PLUS, Engraving Tool for Wood and Metal DIY

【Excellent 20W Laser】The optical power of laser module is 5.5W. It has 0.08mm sharp compressed focal point and 0.01mm engraving accuracy. The cutting speed is faster, and the engraving accuracy is higher.
【Fixed Focus & Powerful】The fixed focus distance is 20mm. At the same power, this laser module can cut 4mm wood perfectly at once. It is ideal for engraving and cutting many different materials such as plywood, bamboo, cardboard, acrylic, MDF, etc..
【Long Service Life】Equipped with high-quality aluminum heatsink and cooling fan, this can help the heat dissipate faster and ensure the module works continuously. This laser module can work at full power for 8 hours. The service life can be up to 10,000 hours.
【Widely Applicable】Our laser module is compatible with LaserGRBL, LightBurn and most engraving software. LaserGRBL software is compatible with Windows system, LightBurn is compatible with Mac OS and Windows system. Compatible with engraving machines and CNC milling machines 3018 series.
【Customer Service】We are proud of our customer service and providing 1....

Check Stock

Creality 3D Printer Laser Engraver Module Ender 3 S1 Laser Engraving Kit 5W 24V 455nm Blue-Violet Light, Safety Cover, Fixed Focus, and Soot Absorption for Ender 3 S1, Ender 3 S1 Pro & Ender 3 S1 Plus

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality. The 5W high-power engraving speed is faster, and the accuracy is higher..
Fixed Focus: Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. The unique convenient focusing unit can quickly and accurately fix the focus and make the best engraving effect..
Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve airflow, all of which contribute to fast and efficient heat dissipation, the built-in air filter cotton can absorb smoke and odor, allowing for prolonged service life..
Full Protection: Upgraded with a new safety cover that meets FDA Class 4 safety level requirements to prevent laser damage to eyes and skin..
Compatibility and Application: The laser module is compatible with Ender 3 S1, Ender 3 S1 Pro, and Ender 3 S1 Plus. It can be used to cut cardboard, wood, bamboo, rubber, leather, acrylic, plastic, etc..

Check Stock

Danpon Receiver,Laser Detector for Green Laser Level with Voice Indicator and Three-Sided LED Indicator,Clamp Included LR-8G

Only for Danpon green Laser levels VH-525 and VH-3DThe frequency of our green laser module is 300Hz,so it is available for our instruments Only for VH-525 and VH-3D.But the laser levels of other companies cannot be used.Before buyingplease make sure that your laser levels is our products green laser level VH-525 and VH-3D.
Clear Multi-Sided ReadoutsErgonomic design with display on the front, side and back of receiver, offers easier visual readout. When mid LED indicator is always on and with continuous buzzing sound, the position is the center of the laser line.This unit is outfitted with a dual-sided bubble vial on both the front and top,which helps to locate the laser plane quickly and accurately..
Working Distance Up to 260FtThe working distance is 9.84Ft-262.47Ft,which is very long..
Power Supply and Clamp Holder The power supply of receiver is 2*AA batteries.The attached clamp makes it easy to mount the detector to a rod or other targets..
Widely Used in Indoors and OutdoorsThis product is widely used in the interior decoration area and outdoor construction with laser level tools,such as ceiling construction, water and electricity installation and the construction of partition boards the installation of and windows..

Check Stock

Twotrees Laser Engraver TR2 Pro 4 in 1 Rotating Module for Engraving Cylindrical Objects, Wine Glass, Tumbler, Ring,Y-axis Rotary Roller Module for TTS-25,TTS-55,TS2 Laser Engraving Machine

The Twotrees 4-in-1 rotary module for laser engraver machine is a high-precision and easy-to-use product designed for the engraving needs of laser engraving enthusiasts, designers, small and micro enterprises, and carpenters.By using laser engraver and this rotary module to achive all of your creativity..
Multi-functional: an engraving module that integrates four engraving functions: roller rotary, chuck rotary, sphere rotary, ring rotary. It can meet the clamping and engraving of various special-shaped workpieces, and solve the engraving needs of most users.
Such as wine glass, yeti tumbler, baseball bat, ring, ball, or mug with handle..
Highly Precise Engraving ： High-precision engraving can be achieved with different components. TR2 Pro Laser can hold the object tightly with a soft-pad covering jaws chuck, allowing smooth and efficient operation. The maximum vector engraving speed can reach 360°/s. The laser rotary module packs a precision stepper motor with a minimum angle of 0.45°, amazing detail on the engraving of the Chuck Rotary..
Wide compatibility : Default 80CM two types of motor adapters are suitable for dif....

Check Stock

Ucreate 3D Printer Laser Engraver Kit for Ender-3 S1/pro 24V 1.6W Engraving Laser Modules Simple Installation Safety Protection Precise Focusing Soot Absorption

Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
The laser engraving head kits enables to engrave metal, wood, acrylic, and others substances..
Compatible with Ender-3 S1/Ender-3 S1 Pro/CV-01 Carving Machine, can be adapted to various 3D printers, laser engraving machine, CNC engraving machine and other machines according to requirements..

Check Stock

Twotrees TTS-25 Laser Engraving Machine 32 Bit Motherboard, Laser Engraver for Plywood Wood Leather, WiFi and App Control, Fixed Focus Laser Power: 2.5W, Working Area: 300x300mm

...re engraving, engraving accuracy: 0.1mm. Laser power: 2.5W, machine output power: 20W..
32-bit Motherboard: The motherboard adopts 32-bit dual-core MCU, which has a faster processing speed, and the engraving speed can reach 10000mm/min. Laser can engrave online and TF card offline engraving. Due to the built-in WIFI module, you can also use mobile phone App and computer WEB for engraving..
Software Compatibility: Twotrees TTS-25/55 series engraving machines are compatible with most engraving software. For example, free software: LaserGRBL (for Windows), paid software: Lightburn (for Windows, Mac), mobile app: MKSLaser (for Android and IOS system), can be downloaded from the mobile store..
Capability of engraving and cutting: TTS-25 is mainly used for engraving. TTS-25 laser can engrave wood, plywood, paper, leather, bamboo, sponge paper, alumina, etc. Laser can cut 2mm plywood. Working Area: 300x300mm..
New upgrade: Twotrees TTS-25 XY-axis aluminum profile with measurements, 32-bit motherboard. Independent power switch. Magnetic laser protective cover, CNC Z-axis height adjuster, corrugated management line, multi-stage metal positioning column, etc. If you have any questions, please contact us..

Check Stock

ATOMSTACK X30 PRO Laser Engraver, 160W DIY CNC Laser Engraving Cutting Machine, 6-core Diode 33W Laser Power for Wood, Vinyl and Metal, Offline Engraving, Built-in F30 Pro Upgraded Air Assist System

【Newly upgraded Atomstack self-research 32-bit motherboard】built-in 256-bit color scale map, so that the engraving works more fine, higher contrast, so that your engraving is not just black..
【New upgrade of laser module】bored with the fixed focus piece? Think the air assist is not beautiful enough? Now, the new X30 Pro laser module has a built-in tool-free focus module and a built-in air-assist system, without the interference of wires, simple and beautiful..

Check Stock