ReviewsLine Level Input

Rockville RPG2X12 Package PA System Mixer/Amp+12\ Speakers+Stands+Mics+Bluetooth

  • ...ut to connect a subwoofer or more speakers, USB / SD Input, MP3 Playback, LCD Display, Bluetooth connectivity, 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers, 8 balanced XLR and ¼” microphone inputs, Tape/CD Line inputs, Master volume control, Bass, treble controls, and level controls on each channel.
  • Reverb effect level control on each channel, Digital delay effect with independent level control, Phantom power for condenser mics! , 5 Band graphic equalizer, Line Out for connection to external amplifier, Return input for connection of external effects processors, Record Out for taping, RF interference protection on all inputs, Aux Send Output : -10 dBv nominal, 1k ohms, Tape Rec Output : -10 dBv nominal, 1k ohms, Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms.
  • Features of Microphones: This package includes (2) of our famous RMM-XLR mics which are top of the line! , Rockville RMM-XLR Dynamic Microphone, Professional 10 FT XLR Cable Included, Steel Mesh Grill, On/Off Switch, Rugged Metal Construction, Natural Sound Reproduction, Beautiful Black Finish (The perfect combination of matte and shiny black finish), Frequency Response : 50Hz-15kHz, Super Cardiod Polar Pattern, Impeda....
Check Stock

JBL BASSPROSL Powered 8 (Renewed)

  • General Specifications Amplifier Power125W RMS Fuse20A Maximum Current Draw12A Quiescent Current Drawless than 800mA Input Sensitivity0.2V – 2V Line-Level Input.
  • 2V – 20V High-Level Input Audio Specifications Frequency Response35Hz – 120Hz Crossover Frequency50Hz – 120Hz Crossover Slope12dB/octave Bass Boost0dB to +9dB @ 70Hz.
Check Stock

SAMSON XP106WDE 6' Portable Rechargeable Bluetooth Powered PA DJ Speaker+Headset Bundle with Samson LS40 Speaker Stand w/Locking Clamps For Expedition XP106, XP106w Speakers

  • ...sic sources. Includes XPD1 Headset USB Digital Wireless System with beltpack transmitter and headset microphone (100' operating range). 2-way speaker enclosure with 6" woofer. 1" high frequency driver. Class D amplifier produces 100 watts of power. 4-channel mixer.
  • XLR-1/4" combo input for microphones and other line level devices. 1/4" input for guitars and other line level devices. 1/8" stereo Aux input for stereo line level devices (MP3 players, keyboards, etc.). Line output to cascade multiple systems together. Music/Speech switch for optimizing output EQ for speech or music playback. USB Wireless port. Battery level LED indicator. Integrated carry handle.
  • 1 3/8" speaker stand mount. Features: Samson LS40 Speaker Stand w/Locking Clamps For Expedition XP106, XP106w Speakers. Lightweight, telescoping speaker stand with tripod base. Ideal for use with Samson Expedition Rechargeable Portable PAs (Escape, Express, XP106, XP106w). Roadworthy steel construction. Sleek black finish. Adjustable up to 4.75' in height.
  • Standard 1 3/8" pole adapter fits virtually any PA speaker. 44lb (20kg) of handling capacity. Locking latch for increased support.
  • Package Includes: (1) Samson XP106WDE 6" Portable Rechargeable Bluetooth Powered PA DJ Speaker+Headset. (1) Samson L....
Check Stock

Diamond Audio MICRO4V2 4-Channel 600 Watts RMS Class D Amplifier

  • ... board for enhanced performance and reliability | Full Range Class D amplifier technology | Bridgeable for high power operation (CH1+CH2/CH3+CH4) | Balanced differential inputs for superior noise rejection.
  • Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Input selector switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
  • RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
  • Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level: 200mV - 10.0V | High Input Level: N/A | Input Impedance - Low Input Level: 20KΩ | High Input Level: 20KΩ.
Check Stock

Klipsch R-15PM Powered Monitor - Black (Pair)

  • The R-15PM powered monitors deliver room-filling sound without taking up much space.
  • 1 x pair of RCA phono level inputs with switch for Phono/Line input versatility (Phono Pre-amp with ground screw terminal).
  • 1 x USB digital audio from a PC or Mac single RCA line level output for connection to sub..
  • 1 x Digital optical, 1 x 3.5mm mini jack line level, Full featured IR remote. Bluetooth wireless technology.
Check Stock

ART MX822 8-Channel Stereo Mixer

  • Eight stereo/mono input channels with individual level, pan and effects send controlsExternal effects loop with independent send and return controlsFront panel 1/4" (TRS) headphone jack with independent control for monitoringSwitchable balanced microphone XLR or 1/4-inch inputs on Channel OneSwitchable low noise +48V phantom power for microphone inputSeparate green and red LED signal and clip indicators for each input channelSix level left and right main output metering including clip indicators.
  • The ART MX822 Eight Channel Stereo Rackmount Mixer is a versatile eight input mixer for studio, live sound or installation applications.
  • Each input accepts a mono or stereo signal and provides independent level, pan and effects send controls.
  • Channel One includes a switchable mic/line source select and the XLR mic connector provides switchable phantom power.
  • Multiple MX822s may be chained for additional inputs using common 1/4-inch TRS cables.
Check Stock

Monoprice 602520 Microphone Stand with Boom

  • ...st the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoo....
Check Stock

Rockville Rock Shaker 10\ Inch Black 600w Powered Home Theater Subwoofer Sub

  • ... foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
  • Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
  • Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS output, Voltage: 110-240V, Product Dimensions in Inches: (W*H*D): 12.6'' x 15.5'' x 16.5'', Shipping Dimensions in Inches: (W*H*D): 15.7" x 19.7'' x 18.5'', Unit Weight: 20 LBS, Shipping Weight: 24.5 LBS, Color: Black.
  • Rear side of the subwoofer: Subwoofer (LINE) Jack in, Subwoofer (LINE) Jack out, Volume Control, Phase switch (0° - 180°), Frequency control, Power switch, Speaker high level in, Speaker high level out??.
Check Stock

BOSS Audio Systems R1002 Car Amplifier - 2 Channel, 200 Watts Max Power, 2 4 Ohm Stable, Class AB, Full Range

  • POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly..
  • WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com.
Check Stock

Jensen JWM22 2-Speaker Zones AM/FM|BT|HDMI|AUX Cube Wall Mount Stereo, Speaker Output 4X 6 Watt, 30 Station Presets (18FM/12AM), Receives Bluetooth Audio (A2DP) and Controls (AVRCP) from Devices

  • Bluetooth streaming audio (A2DP) and control (AVRCP), Front USB with MP3/WMA playback, Front HDMI input for pass through to HDMI output, HDMI Input Pass Through Rear HDMI Output.
  • HDMI pass thru (plays HDMI audio input over speaker and low level outputs), Digital AM/FM Tuner/30 Preset stations (12 AM/18 FM), 2 Zones / 4 Speakers Output.
  • Rear AUX A/V input (RCA jacks), Rear AUX Audio Output (RCA), Subwoofer Audio Output (RCA), Mono subwoofer line level audio output (rear RCA jack).
  • Electronic Bass, Treble, Balance and Fader Controls. White dimmable LED backlit controls, Stereo line level audio output zone A (rear RCA jacks), 24 Watts maximum, Clock with alarm and sleep timer.
  • Mounting Dimensions: 96.8mm (W) x 73.8mm (D) x 99.9mm (H). 20-PIN Speaker Wire Harness, Installation Hardware and Wireless Remote Control Included.
Check Stock

Rockville RPG102K Dual 10" Powered Speakers DJ PA System Bluetooth+Mic+Stands

  • ...awesome bass response. 25mm Compression Horn Tweeter Driver For Clear Highs..
  • Bluetooth Built in to stream your music wirelessly. USB input for MP3 playback from a USB drive . SD digital MP3 music player allows you to play back files stored on a memory card. Combo Jack Mic Level Input with volume control..
  • Combo Jack Line Level Input with volume control. RCA Line Input with volume control. XLR Output to connect a powered subwoofer, amplifier, or more speakers. 1/4" Speaker Out to Connect to the Passive Speaker. Master Volume/ Master Treble/ Master Bass Knobs..
  • LCD screen- displays MP3 functions and easy BT connectivity pairing. Wireless remote control to adjust any of the MP3 player functions only. Compact and light weight system is portable yet delivers distortion free sound even at high volumes. Ergonomically shaped side handle for easy carrying and setup.
Check Stock