ReviewsLinear Stepper Motor

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

Nema23 57 Stepper Motor Mount bracket Support Clamp Aluminium Alloy Mounting Holder for CNC Router Milling Engraving Machine

Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock

diymore 5-Set DC12V 28BYJ-48 Stepper Motor with ULN2003 Drive Boards Blue(12V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

Protech 51-102500-01 1/2 hp 120/1/60 Blower Motor

  • HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error..
  • LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise..
  • DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction..
  • WIDE APPLICATION: This small motors can be used in various area, such as stage lighting.
  • WHAT YOU GET: The package includes 1* 42 Stepper Motor..
Check Stock

STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-Step Resolutions for Nema 17 and 23 Stepper Motor

  • Stepper motor driver DM542T is updated to version V4.0, add 5V/24V logical voltage selector, alarm outputs..
  • Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor.
  • 1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution.
  • Pulse signal: 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock

FUYU FSL40 Linear Guide Table Ball Screw Motion CNC Linear Guide Stage Actuator Motorized Nema 23 Stepper Motor[150mm Stroke]

  • Special made nema 23 stepper motor with max speed up to 1200 rpm.
  • Quality ball screw with accuracy up to ±0.03mm,also low noise when working.
  • M4 screw on sideways to install end stop,and on base board for easy installnation.
  • Oxided aluminum avoid rusting,extra support unit enhanced stability.
  • have multi length stroke options from 50mm to 1000mm linear guide for cnc device.
Check Stock

FUYU FSL40 Linear Guide Table Ball Screw Motion CNC Linear Guide Stage Actuator Motorized Nema 23 Stepper Motor[600mm Stroke]

  • Special made nema 23 stepper motor with max speed up to 1200 rpm.
  • Quality ball screw with accuracy up to ±0.03mm,also low noise when working.
  • M4 screw on sideways to install end stop,and on base board for easy installnation.
  • Oxided aluminum avoid rusting,extra support unit enhanced stability.
  • have multi length stroke options from 50mm to 1000mm linear guide for cnc device.
Check Stock

FUYU FSL40 Linear Guide Table Ball Screw Motion CNC Linear Guide Stage Actuator Motorized Nema 23 Stepper Motor[50mm Stroke]

  • Special made nema 23 stepper motor with max speed up to 1200 rpm.
  • Quality ball screw with accuracy up to ±0.03mm,also low noise when working.
  • M4 screw on sideways to install end stop,and on base board for easy installnation.
  • Oxided aluminum avoid rusting,extra support unit enhanced stability.
  • have multi length stroke options from 50mm to 1000mm linear guide for cnc device.
Check Stock

FUYU FSL40 Linear Guide Table Ball Screw Motion CNC Linear Guide Stage Actuator Motorized Nema 23 Stepper Motor[500mm Stroke]

  • Special made nema 23 stepper motor with max speed up to 1200 rpm.
  • Quality ball screw with accuracy up to ±0.03mm,also low noise when working.
  • M4 screw on sideways to install end stop,and on base board for easy installnation.
  • Oxided aluminum avoid rusting,extra support unit enhanced stability.
  • have multi length stroke options from 50mm to 1000mm linear guide for cnc device.
Check Stock

FUYU FSL40 Linear Guide Table Ball Screw Motion CNC Linear Guide Stage Actuator Motorized Nema 23 Stepper Motor[1000mm Stroke]

  • Special made nema 23 stepper motor with max speed up to 1200 rpm.
  • Quality ball screw with accuracy up to ±0.03mm,also low noise when working.
  • M4 screw on sideways to install end stop,and on base board for easy installnation.
  • Oxided aluminum avoid rusting,extra support unit enhanced stability.
  • have multi length stroke options from 50mm to 1000mm linear guide for cnc router device.
Check Stock