ReviewsLiquid Cooled

Polk Audio DB571 5-by-7-Inch Coaxial Speakers Pair Black

5 inches x 7 inches 2 way Speakers (Marine Certified).
Power Handling: Peak: 360 watts per pair / 180 watts each & RMS: 120 watts per pair / 60 watts each.
Dynamic Balance polymer/mica composite mineral filled cone is stiff yet lightweight for big sound and little distortion.
19mm liquid cooled silk/polymer composite dome tweeter with neodymium magnet for clear and detailed highs.
Multi hole mounting pattern and shallow depth for easy drop in installations in most cars.

LUMINOUS TUBES. THE POWER OF SOLID STATE. SPECTACULAR SOUND. As an embedded tube/hybrid amplifier (DC coupled in to out, no coupling caps), the Liquid Platinum gives you the beautiful sound of tubes together with the grunt of solid state circuitry to drive the headphones. It uses two 6922 tubes or exact equivalents, such as 6DJ8s..
SINGLE ENDED and BALANCED INPUTS and OUTPUTS: With multiple inputs and outputs for balanced and single ended operation and easy front panel input selection, the Liquid Platinum is compatible with just about everything..
KEEPS ITS COOL. The Platinum is ventilated with two long, screened slots on either side of the top and large screens on the bottom to ensure that it is well cooled. Ensure your amplifier has enough space around the vents and is not in a sealed enclosure..
YOU'RE PROTECTED.The Liquid Platinum has a built-in, slow power on. It warms up the heaters first and then, after a short delay, brings up the SS rails and tube HV, protecting the internal circuitry during startup..
It also includes a connection delay to the headphones and an active offset detector, just in case an internal fault or source fault applies too much DC voltage to the output, it immediately disconnects your headphones.

Pair of marine certified speakers perfect for use in boats of all types.
Equipped with a 0.75 inch liquid cooled silk polymer composite dome tweeter.
Equipped with a dynamic balance polymer/mica composite mineral filled cone for a big sound.
Durable butyl rubber surround stands up to the stress of extreme temperatures, sunlight and time.

For outboard, water cooled & air cooled 2-cycle engines.
Including those calling for 100:1 fuel to oil ratio, & all air cooled 2-cycle engines requiring an NMMA TC-W, TC-W11 or TC-W3.
Exceeds requirement of water cooled outboards and air cooled engines at heavy loads and high speeds for long periods.

Experience the beauty and strength of Ginsu's Japanese Damascus 420J2 stainless steel wrapped around a VG-1 metal core.
Hanaita Damascus Blades are made with 33 layers of alternating high and low carbon Japanese stainless steel.
These layers are forged together and sharpened to an extreme 10 degree Asian knife angle.
The blades are cryogenically cooled with liquid nitrogen for ultimate edge retention by aligning molecules, creating one of the sharpest, strongest....

❶[TWO-WAY CONTROL]Support motherboard control and RESET button control.It can be easily controlled by Motherborad through 5V ADD-RGB Header and they can synchronize with other ADD-RGB devices..
❷[HIGH COMPATIBILITY]Intel LGA 775 / 1151 / 1155 / 1156 / 1366 / 2011(Core i3/i5/i7CPU).
AMD AM4 / FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 CPU..
❸[MAXIMUM COOLING PERFORMANCE] Featuring with unique microflow fin design,smart PWM cooling fan, a powerful water pump, keep your CPU at lower temperature at all time..
❹[PREMIUM DESIGN]Optimized Medical Grade Rubber Water-cooled Pipe, Zero leakage, Efficient and reliable water circulation, Maintenance Free Operation..
❺[EASY INSTALLATION]Effortlessly upgrade your stock CPU fan to the efficiency of Intel/AMD compatible liquid CPU cooling in a few easy steps.What You Get: CC120RGB liquid cooler, our worry-free 12-month warranty and friendly customer service..

Circulating Tank Heater. Fluid Capacity: 41-60 quart. 2000 Watts @ 120 Volts. The circulating tank heater is designed to keep the coolant in your engine warm. This product helps stimulate warm temperatures, gives quicker starts and protects your engine from damage that can occur during cold weather starts. New lower radiator hose connectors. Installations easier and simpler. Fits most liquid cooled engines. Equipped with check valve..

DIO appears and makes his iconic declaration when the mug is filled with coffee, tea, or other hot liquid..
Our magic color-change mugs use an advanced coating that allows the image to appear faster and stay visible longer, even when mug has cooled to a much lower temperature than other mugs. Because of this, the image is slightly visible even when cold, especially in direct sunlight..
Microwave safe 11oz high-quality ceramic mug. Hand-wash only..
Made in the USA with some globally sourced components by a small family business founded, owned, and operated by a US military veteran and his rocket scientist wife..
The design is printed on both sides of the mug. We use extremely high heat and pressure to embed ink directly into the surface of the mug, instead of applying a vinyl decal or silkscreen like many others..

All pistons, rings, pins and circlips are manufactured to OEM specifications.
Piston weight compatible with original piston.
Fits: 1986-1999 Polaris Indy Trail 488cc Fan-Cooled (All Models).
Fits: 1997-1998 Polaris Indy SuperSport 488cc Fan-Cooled.
Fits: 1993-1997 Polaris WideTrak GT 488cc Fan-Cooled & 1989-1992 SuperTrak 488cc Fan-Cooled.

LIPSTICK MOULD STRIPPER: Made of high-grade quality aluminum alloy, which is safe, environmental and durable for long term use. Suitable for 12.1mm diameter lipstick mould. It is used for lipstick mould.
DIY LIPSTICK MOLD: With that DIY lipstick mold, you can modulate colors you like, and ingredients are safe and assuring. High gloss and fine grinding, easy to eject of the lipstick. You can do sandwich lipsticks, double color lipstick etc.
BEST GIFT: Ideal Birthday Gift, Christmas Gift, Thanksgiving Gift, Novelty Gift or Wedding Registry Gift for your wife or girlfriend.
USAGE: Pour liquid lipstick into the mold, wait for 30 minutes, or put it into refrigerator or 20 minutes, so that liquid can be cooled to solid. Use the exit lipstick mold to take it out.
WARM TIP: During first use, please soak it in olive oil for 1-2 hours, and then wipe the mold with cotton swabs to keep it dry. It can not be forcibly wiped or wiped by hard objects, or it is easy to make the mold blacken.