ReviewsLithonia Elb 06042

Gruenlich LED Emergency Exit Lighting Fixtures with Two LED Heads and Back-Up Batteries- US Standard Emergency Light, UL 924 Qualified, 120-277 Voltage (2-Pack)

  • This low-profile remote is designed with a single, fully adjustable lamp head. These are ideal for outdoor mounting above-the-door and other tight fits at lower mounting heights..
  • Weather-proof (WP) remotes are, high-impact resistant thermoplastic, sealed and gasketed, gray finish with fully adjustable lamp heads. For use in damp and wet location areas..
  • These remotes are compatible with EU2L REM, ECC REM emergency lighting units..
  • UL Listed with approved Lithonia Lighting products. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Wet location listed (ERE WP) -4°F to 122°F (-20°C to 50°C).
  • Eight, 1W total, white LEDS per lamp head. For use with 3.6V, 6V, 9.6V & 12V batteries.
Check Stock

Lutron Maestro Dual Digital Dimmer and Switch, Only for Incandescent and Halogen Bulbs, 300-Watt Single Pole | MA-L3S25-WH | White

  • Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
  • supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
  • not compatible with smart lighting fixtures.
  • Features an easy-to-use slider for full-range dimming.
  • to turn the light OFF, move the slider all the way down until it clicks.
  • Side dial allows for user-friendly fine-tuning controls.
  • adjust the lowest dimming level to stop light bulbs from flickering.
  • Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
  • heat & fade resistance to temperatures over 100° to prevent discoloration.
  • compatible with dimmable light bulbs only.
Check Stock

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-I, Ivory

  • Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
  • supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
  • not compatible with smart lighting fixtures.
  • Features an easy-to-use slider for full-range dimming.
  • to turn the light OFF, move the slider all the way down until it clicks.
  • Side dial allows for user-friendly fine-tuning controls.
  • adjust the lowest dimming level to stop light bulbs from flickering.
  • Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
  • heat & fade resistance to temperatures over 100° to prevent discoloration.
  • compatible with dimmable light bulbs only.
Check Stock

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-GD, Gold

  • Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
  • supported by major-brand light bulbs from GE, Cree, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
  • not compatible with smart lighting fixtures.
  • Features an easy-to-use slider for full-range dimming.
  • to turn the light OFF, move the slider all the way down until it clicks.
  • Side dial allows for user-friendly fine-tuning controls.
  • adjust the lowest dimming level to stop light bulbs from flickering.
  • Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
  • heat & fade resistance to temperatures over 100° to prevent discoloration.
  • compatible with dimmable light bulbs only.
Check Stock

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-BK, Black

  • Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
  • supported by major-brand bulbs from GE, Cree, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
  • not compatible with smart lighting fixtures.
  • Features an easy-to-use slider for full-range dimming.
  • to turn the light OFF, move the slider all the way down until it clicks.
  • Side dial allows for user-friendly fine-tuning controls.
  • adjust the lowest dimming level to stop light bulbs from flickering.
  • Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
  • heat & fade resistance to temperatures over 100° to prevent discoloration.
  • compatible with dimmable light bulbs only.
Check Stock

Beam Lighting 24” Curved Under Cabinet Light Cover Replacement | White Ribbed Acrylic Diffuser | 23-7/8” Length x 2-3/4” Width x 1-3/8” Height Please Check Size is Correct Before Ordering

  • REPLACEMENT LENS FOR 24 INCH UNDER CABINET / UNDER COUNTER FLOURESCENT LIGHT: High quality 24 inch (23-7/8 inch nominal length) white acrylic replacement lens cover diffuser for under cabinet fluorescent fixture. Fits several different Lithonia, GE models, plus many others..
  • 100% ACRYLIC NON-YELLOWING FORMULA FOR LONGEVITY: These lenses have ribbing on the outside for maximum light diffusion, and are UV stabilized to prevent yellowing..
  • QUALITY AMERICAN MADE PRODUCT: Our lenses are manufactured here in the USA and are made to the same specifications as the covers on the original fixture, and are far superior to cheap imported replacements..
  • THIS LENS MEASURES: 23-7/8 inch length x 2-3/4 inch width x 1-3/8 inch height (will fit 24 inch light fixture)..
  • NOT SURE ABOUT SIZING?: A Beam Lighting Plastics Expert is just a phone call or email away..
Check Stock

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-LA, Light Almond

  • Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
  • supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
  • not compatible with smart lighting fixtures.
  • Features an easy-to-use slider for full-range dimming.
  • to turn the light OFF, move the slider all the way down until it clicks.
  • Side dial allows for user-friendly fine-tuning controls.
  • adjust the lowest dimming level to stop light bulbs from flickering.
  • Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
  • heat & fade resistance to temperatures over 100° to prevent discoloration.
  • compatible with dimmable light bulbs only.
Check Stock

Clear Strip Light Mounting Clips Self-Adhesive Strip Light Brackets Hooks,Fixing Clamps LED Strip Light 8mm,10mm,12mm.100 Pack Strip Light Brackets Holder,USB Cable Wires Organizer.

  • REPLACEMENT LENS FOR 12 INCH UNDER CABINET / UNDER COUNTER FLOURESCENT LIGHT: High quality 12 inch (11-7/8 inch nominal length) white acrylic replacement lens cover diffuser for under cabinet fluorescent fixture. Fits several different Lithonia fixtures plus many others..
  • 100% ACRYLIC NON-YELLOWING FORMULA FOR LONGEVITY: These lenses have ribbing on the outside for maximum light diffusion, and are UV stabilized to prevent yellowing..
  • QUALITY AMERICAN MADE PRODUCT: Our lenses are manufactured here in the USA and are made to the same specifications as the covers on the original fixture, and are far superior to cheap imported replacements..
  • THIS LENS MEASURES: 11-7/8 inch length x 2-7/8 inch width x 1 inch height (will fit 12 inch light fixture)..
  • NOT SURE ABOUT SIZING? : A Beam Lighting Plastics Expert is just a phone call or email away..
Check Stock

Beam Lighting 12” L-Shape Under Cabinet Light Cover Replacement | White Ribbed Acrylic Diffuser | 11-7/8” Length x 2-7/8” Width x 1” Height (Please Check The Size is Correct Before Ordering)

  • REPLACEMENT LENS FOR 42-3/8 INCH UNDER CABINET / UNDER COUNTER FLOURESCENT LIGHT: High quality 42 inch (42-3/8 inch nominal length) white acrylic replacement lens cover diffuser for under cabinet fluorescent fixture. Fits several different Lithonia fixtures plus many others..
  • 100% ACRYLIC NON-YELLOWING FORMULA FOR LONGEVITY: These lenses have ribbing on the outside for maximum light diffusion, and are UV stabilized to prevent yellowing..
  • QUALITY AMERICAN MADE PRODUCT: Our lenses are manufactured here in the USA and are made to the same specifications as the covers on the original fixture, and are far superior to cheap imported replacements..
  • THIS LENS MEASURES: 42-3/8 inch length x 2-7/8 inch width x 1 inch height (will fit 43 inch light fixture)..
  • NOT SURE ABOUT SIZING? : A Beam Lighting Plastics Expert is just a phone call or email away..
Check Stock

Lithonia Lighting FMLRDL 35840 M4 14 in. 44W White 120V Ceiling Light, 4000K, 4400 Lumens, 220W Equivalent 20-Inch Dimmable Round LED Flush Mount, 4000, 120 Volts, 44 Watts, Damp Listed

  • Energy Star Certified to save you hundreds of dollars every year and time since changing light bulbs is a thing of the past.
  • Cost Efficient LEDs are designed to last 30,000 hours or over 13 years when on everyday for 6 hours/day – drastically reducing time wasted changing light bulbs.
  • Meets Highest Standards so perfect for Multi Family installation – Energy Star certified, cUL certified in the USA and Canada and certified for Damp Locations.
  • Very bright LEDs deliver general ambient lighting for surface-mount ceiling application.
  • Lithonia Lighting all white fixture works with most standard dimmers from Leviton and Lutron allowing the right level of light output and is easily installed.
  • Features a white acrylic diffuser. Hidden cam-latches provide easy diffuser removal for installation and maintenance..
  • 20” units produce 4,000 lumens, a 4000K Cool white color temperature at 50,000 hours of service life..
  • Fixture operates at 120 volts, 60Hz. Standard input = 44 watts. All mounting hardware included..
Check Stock

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, Wall Plate Included, TGDS1-W-6PCS, White, 6 Pack

  • Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
  • supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
  • not compatible with smart lighting fixtures.
  • Features an easy-to-use slider for full-range dimming.
  • to turn the light OFF, move the slider all the way down until it clicks.
  • Side dial allows for user-friendly fine-tuning controls.
  • adjust the lowest dimming level to stop light bulbs from flickering.
  • Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
  • heat & fade resistance to temperatures over 100° to prevent discoloration.
  • compatible with dimmable light bulbs only.
Check Stock