ReviewsLoad Cell Indicators

Renogy 3000W Pure Sine Wave Inverter 12V DC to 120V AC Converter & 2PCS 100 Watt Solar Panels 12 Volt Monocrystalline, High-Efficiency Module PV Power Charger, 2-Pack Compact Design

  • Product 1: 【POWERFUL DC-AC】3000W continuous, 6000W peak surge during load start-up, 12V to 120VAC pure sine wave with conversion efficiency 003e90%, reduces conversion loss..
  • Product 1: 【SAFE FOR USE】LED indicators for under-voltage and over-voltage protection, over-temperature protection, over-load protection, and short circuit indication. Cooling funs and ground-fault circuit interrupter (GFCI) protection..
  • Product 1: 【PROTECT YOUR ELECTRONICS】Advanced pure sine wave technology provides quality AC equivalent to grid power which will protect and extend the life of your electronics and appliances. With its quiet and high inductive loads, there are no strange buzzing sounds when your electronics are turned on and allow them to run smoother, cooler, and quieter..
  • Product 1: 【EASY-TO-USE】 Offers a built-in 5V/2.1A USB port, 3 AC Outlets and 1 AC Terminal Block, along with a 19.8ft Wired Remote Control..
  • Product 2: [Reliable Power Output] Renogy's 100W monocrystalline solar panel can provide an average of 400-500 Watt-hours (Wh) or 33-41Amp-hours (Ah) of electricity per day (depending on sun availability)..
  • Product 2: [Efficient Performance] Bypass diodes protect the solar cells from overheating and allow the solar panel to continue working du....
Check Stock

ShangHJ 2 Sets Digital Load Cell Weight Sensor + HX711 ADC Module Weighing Sensor for Arduino DIY Portable Electronic Kitchen Scale Kit (1kg, HX711)

  • ✅The Load Cell maximum measures force: 1kg (2.2lb).
  • ✅You need to connect load cell with HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-.
  • ✅Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi.
  • ✅This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.
  • ✅The HX711 On-chip active low noise PGA with selectable gain of 3264 and 128.
Check Stock

Micromatic WS-2910 Electronic Surge Protector for Microwave Oven

  • ✅ BEST PROTECTION: Professional surge protector, specially designed to protect your microwave against high and low voltage, brownout, spike, instant surge, power failure, voltage fluctuation and load shedding.
  • ✅ USAGE: Suggested for all types of microwaves UP TO 70 LITERS, 2.5 CUBIC FEET OR 1500 WATTS. It will prevent damage, ensuring that your microwave is safe from power spikes. These brief but powerful spikes can cause irreparable damage to your home equipment.
  • ✅ DELAY PERIOD: The delay period indicator turns on when the MICROMATIC is first plugged to the power outlet or after a power outage. It takes 30 SECONDS delay time to allow stabilization of the system. PLEASE WAIT 3 MINUTES before you plug in your appliance the first time you use this unit.
  • ✅ LIGHT INDICATORS: Light indicators for Normal, High, Low voltage and Time Delay.
  • ✅ 100% MONEYBACK GUARANTEE: We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality related issues. Purchase with confidence and enjoy our risk-free offer.
Check Stock

Countermatic WS-23631 Electronic Surge Protector for Small Kitchen Appliances

  • ✅ BEST PROTECTION: Professional surge protector, specially designed to protect your small appliances against high and low voltage, brownout, spike, instant surge, power failure, voltage fluctuation and load shedding.
  • ✅ USAGE: Recommended for small kitchen appliances: blender, expresso machine, mixers, small electric oven, food processor, waffle maker, toaster and others small counter appliances. This dedicated surge protector will prevent damage, ensuring that your appliances are safe from power spikes..
  • ✅ DELAY PERIOD: The delay period indicator turns on when the COUNTERMATIC is first plugged to the power outlet or after a power outage. It takes 30 SECONDS delay time to allow stabilization of the system. PLEASE WAIT 3 MINUTES before you plug in your appliance the first time you use this unit.
  • ✅ LIGHT INDICATORS: Light indicators for Normal, High, Low voltage and Time Delay.
  • ✅ 100% MONEYBACK GUARANTEE: We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality related issues. Purchase with confidence and enjoy our risk-free offer.
Check Stock

Verizon Cell Phone Signal Booster Verizon Signal Booster for Home Boost 5G 4G LTE Band 13 Cell Phone Booster Verizon Network Extender Cell Booster Verizon Cell Phone Extender Antenna for Home 4500sqft

  • ...urfing internet, sharing photos, extends cellular battery life! Say goodbye to weak signal !.
  • ▶【Extends Coverage Up to 4,500Sq.Ft.】Portable cell phone signal booster verizon cell signal booster 5g booster with excellent features high gain 65dB, auto gain control, LED indicators, low noise, inactivity mode, eliminate interference. cell phone repeater verizon booster extends signal coverage up to 4,500 sq.ft.for multiple Rooms.Boosts weak signal 1-2 Bars to stronger 4-5 Bars after installed properly. Cell phone booster for home, metal building, camping, garage,basement,village,remote Area.
  • ▶【Easy to Set Up & High Gain Directional Yagi Antenna】Verizon cell phone range extender verizon cellular extender phone booster is Easy set up! Outdoor Yagi cell antenna should toward Verizon Cell Tower, Yagi's narrow receiving angles captures signal coming from cell tower accurately, rejects interference coming from other directions. verizon antenna Yagi is better than omni-directional antenna to some extent. Included 50ft coax cable,4D-FB,high-speed,low loss on signals.Can be extended to 100ft.
Check Stock

Nextech DFS-X5000 (5000N/1100lbf/500kgf) Digital Force Gauge with External S-Beam Load Cell, Peak/Track Mode, Pass/Fail LED,USB Output, Back-Lit Graphic LCD,Metal Enclosure

  • Made in Thailand. Power adapter/charger input 100-240 volts AC..
  • Accuracy 0.5% of FS (Full Capacity) for 3,000N-20,000N model..
  • Tension or Compression Load. Peak Hold or Track Mode..
  • Metal Enclosures. Supplied with 2 bearing holder. Two M12 thread ball bearing holder provided, to attached to Load Cell. Cable length between gauge and S-Beam loadcell is 2 meters.
  • Power by internal rechargeable NiMH battery pack or directly from wall plug charger..
  • Menu driven, digital graphic LCD display, with white back light..
  • 500 reading can be recorded on internal memory, for later viewing or download..
  • Re-calibration feature with password protection. Load cell condition and overload counter's display page..
  • Complete set with carrying case, charger. For Capacity 3,000N-20,000N load cell with bearing holder are provided, on both end. Calibration Certificate included.
  • Ideal for tension testing but can also be applied for compression testing..
Check Stock

Strike Indicator.com Combo Pack Deluxe

  • STRIKE INDICATOR TOOL - This innovative, patented tool is the easiest way to attach wool or yarn indicators to your line. It offers the ultimate Adjustable, Knotless, Super Sensitive and Stealthy indicators! This innovative system casts like a dry fly and lets you adjust your indicator so that your nymph is presented exactly in the Trout’s Strike Zone. There are no weaknesses or kinks - our system is 100% knotless. Our indicators are super sensitive and detect the even the most subtle takes!.
  • 12 FEET OF WOOL INDICATOR YARN - 3 feet per spool. Our strike indicator yarn is made from 100% Pure, Natural and Bio-Degradable New Zealand Wool.  We custom dye our New Zealand strike indicator wool yarn. Use Neon Lemon - in rough water - Pearly (Stealthy) White - looks like an air bubble, Bright Fluorescent Green - in low light conditions, Radioactive Orange when sighting is a challenge. Once you've trimmed your indicator - add a dab of fly floatant to the wool and it will float all day..
  • 200 PRECISION MACHINE CUT SLEEVES - In the highest quality Custom Vial for The New Zealand Strike Indicator System. These sleeves are precision cut to 4mm - and fit our regular size Indicator Tool with the Red handle. The Pre-Cut Sleeves and Vial comes with 200 Sleeves and ....
Check Stock

AT&T Cell Phone Signal Booster Verizon Signal Booster 5G 4G LTE 3G All U.S. Carriers T Mobile Cell Signal Booster Verizon Cell Phone Booster ATT Signal Booster Verizon Cell Booster for Home Boost Data

  • ...ts signal up to 6,000 sq. ft, cell signal booster could reduces dropped calls and improves the voice quality in your house, Keep the distance between the outdoor antenna and indoor antenna should be above 39ft..
  • 【Advanced Features】Nice performance verizon signal booster verizon cellular signal booster, Smart LED Indicators att signal booster verizon phone extender, Sleep Mode, Auto Gain Control, Low Operating Temperature, Ultra-Low Noise Receive, Portable, High Gain cell phone booster for home verizon cell service booster. The home cell phone signal booster verizon network extender is used for Village, Garage, Basement, Home, Office, Hotel, Apartment Cabin, Shop, Building and so on..
  • 【Warranty&Certification】AT&T Cell Phone Signal Booster AT&T Signal Booster with FCC authentication certificate, 30-day money-back guarantee, 90 Days Replacement for defective unit, 3 Year Manufacturer Warranty. Cell phone booster antenna, high-speed transmission and Low loss 4D-FB coax cable, 12V power adapter and other parts included in the cellular signal booster package, verizon lte network extender kit is Very easy to install..
Check Stock

USB 3.0 Power Meter Tester Digital Multimeter Current Tester Voltage Detector DC 30.00V 4.000A Test Speed of Charger Cables QC 2.0/3.0 AP 2.4A

  • Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance.
  • The AT34 uses a 0.96-inch IPS high-definition color LCD display to display the state of charge of the appliance, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators at a glance. 160 degree wide viewing angle, high brightness and long working life. Fast charge recognition, widely compatible: AT34 supports QC2.0, QC3.0, i Phone 2.4A/2.1A/1A/0.5A, Andriod DCP, fast charge protocol identification, let you know the state of charge of the phone..
  • 4-bit accuracy for more accurate measurements.
  • Measure the load equivalent impedance and power.
  • Thermometer function, Celsius and Fahrenheit free switching: Using high-precision thermistor sensor.
  • USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test..
  • Package:1 X USB Meter, 1 X USB load ( 5V , 1A or 2A ) , 1 X Quick Tour. We offer User Manual PDF at the product detai....
Check Stock

Rockville D14 7000w Peak/2000w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp

  • ...Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles..
  • Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (20A, 250V). Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz. THD + Noise @ 1Khz full power: .
  • Power Ratings: RMS Power Output: Stereo 8 Ohm: 2 x 700W. Stereo 4 Ohm: 2 x 1000W. Bridged 8 Ohm: 1 x 2000W. Peak Power Output: Stereo 4 Ohm: 2 x 3500W Max. Bridged 8 Ohm: 1 x 7000W Max. ​​.
  • Terminals: Input Terminals: Combo jack (XLR and ¼”) A & B inputs. Output Terminals: Banana binding post speaker output. Speakon output. XLR ou....
Check Stock

Rockville RPA16 10,000 Watt 2 Channel Power Amplifier Pro/DJ Amp+Speakon Cables

  • ...Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
  • Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz - 30 Khz, THD + Noise @ 1Khz full power: .
  • Features of RCSS14-25: RockvilIe RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable, 100% Copper Conductors for Lower Resistance, Black PVC Jacket for Both Durability and Flexibility, Intended for High-Current Applications Only, Not Line-Level Signals, Length: 25 Ft, Gauge: 14.
Check Stock