ReviewsLoad Sense Relay Valve

3V Relay Power Switch Board, Icstation 1 Channel Optocoupler Module Opto Isolation High Level Trigger for IOT ESP8266 Development Board (Pack of 5)

  • 【Optocoupler Isolator】 3V/3.3V power relay module supports photocoupler isolation control..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【Jumper Caps】You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
  • 【Rotate Screw Terminals】 The external connection adopts a rotary crimping terminal, which makes the crimping more firm, and has fixed mounting holes for easy installation..
  • 【30VDC 250VAC Load】The power switch is compatible with 10A 250VAC and 10A 30VDC load..
Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

  • Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
  • Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
  • The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
  • Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
  • All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
  • High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
  • Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check Stock

Dayton 1UHH4 Line Voltage Control, Heat, Cool, Analog

  • Price For: Each Cooling Full Load @ 120V: 13.8A Voltage Range: 110 to 125VAC Enclosure Type: Steel Color: Black Switch Action: Close On Rise Includes: 6 ft. Cord Standards: ETL C/US Switch Type: SPST Number of Switches: 1 Sensor Type: Bi-Metal Height: 5-1/2" Features: HSJ Cord with Piggyback Plug, Mount with Suspension Chain or Wire.
  • Control Range: -10 Degrees to 100 Degrees F Differential: 6 to 8 Degrees F Full Load Amps: 13.8A Number of Relay Inputs: 1 Number of Relay Outputs: 1 Input Voltage: 120VAC Locked Rotor Amps @ 120V: 58.8A Application: Cooling Only Inductive Amps @ 120V: 13.8A Cooling Locked Rotor @ 120V: 58.8A Contact Rating Resistive @ 120V: 13.8A Mounting Type: Suspension Chain or Wire Item: Line Volt Mechanical Tstat.
  • Full Load Amps @ 120V: 15A Depth: 2" Width: 2-1/2" Number of Stages: 1 Country of Origin (subject to change): China.
Check Stock

AITRIP 1PCS 8 Channel 5V Solid State Relay Module Board High Level Trigger Compatible with Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC (1PCS)

  • Solid State Relay Module Board has been assembled, and electrical test passed.
  • Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
  • Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
  • Load voltage range: 75 to 264VAC (50/60Hz).
  • Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Check Stock

2-Pin Electric Flasher Relay VOFONO 12V Heavy Duty 2 Pin Compatible Automobile Motorcycle Bike Scooter Fix Turn Signal Bulbs Fast Hyper Flash,Two Prong Round

  • This is a heavy duty 2 pin 12V electric signal flasher (blinker) relay that is a plug and play design. No extra wiring or modifications are required....
  • Our led flasher relay retain the reliability of an flasher along with staying extra cool, consuming very little power and extra long lasting life..
  • Our 2 pin 12 volt round led flasher relay work for Most Automotive/Motorcycle/Bike to fix the rapid flashing turn signal or prevent weak or no....
  • Our no load digital flasher relay Works with regular bulbs.
  • Our two prong led flasher relay Product Dimension:2.3 x 1.4 x 1.3 inches . MAX 20 AMPS & Voltage: 12 volts.
Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

  • 【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
  • 【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
  • 【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
  • 【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
  • 【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..
Check Stock

Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.

  • The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • Equiped with high-current relay, AC250V 10A.
  • DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
  • You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
Check Stock

SIEMENS 6ES7 214-1AG40-0xB0 SIMATIC S7-1200 CPU 1214C, Compact CPU

  • Programmable Control -- This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
  • Built-in Analog Input and Output -- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030) Built-in Analog output DA, corresponding to internal data register D5101..
  • The PLC with Two Programming Port -- The TTL interface and the 232 interface. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. When the PLC need to connect with the touch screen or text, can be used to conne....
Check Stock

2-Pin Electronic LED Flasher Relay,RDBS 12V LED Heavy Duty 2 Pin Compatible Automobile Motorcycle Bike Fix Turn Signal Bulbs Fast Hyper Flash,2 Prong Flasher Relay

  • This is a heavy duty 2 pin 12V LED electronic signal flasher (blinker) relay that is a plug and play design. No extra wiring or modifications are....
  • Our led flasher relay retain the reliability of an flasher along with staying extra cool, consuming very little power and extra long lasting life..
  • Our 2 pin 12 volt round led flasher relay work for Most Automotive/Motorcycle/Bike to fix the rapid flashing turn signal or prevent weak or no....
  • Our no load digital flasher relay Works with regular bulbs, and some LEDs.
  • Our two prong led flasher relay Product Dimension:2.3 x 1.4 x 1.3 inches . MAX 20 AMPS & Voltage: 12 volts.
Check Stock

X10 WS469 Push Button Relay Wall Switch

  • Turn on your ceiling & wall fixtures from anywhere in your house.
  • Push Button Style X10 Relay Wall Switch . Includes X10 updated relay ..
  • 3-Way & Single Pole (On/Off only) Not a dimmer.
  • NOTE: This problem is most likely caused by line noise. The noise on the line stops the X10 signal from getting through so you can't turn the light on. BUT if you turn the light on from its push button, it puts a load across the line that attenuates the noise, so now you can dim or turn off the light. As soon as you turn it off, and remove the load, the noise pops back up. You need to determine the source of the noise and filter it..
Check Stock

5 Pin 12V Relay 12V 30A Relay Multi Purpose Automotive Relay Black Starter Relay Car Heavy Duty Relay for Car Motor Automotive Replacement Accessories 4 Pieces

  • Sufficient for using: you will receive 4 pieces 12V 30A 5 pin relays, the size is about 1.41 x 0.94 x 0.63 inch/ 3.6 x 2.4 x 1.6 cm, enough quantity....
  • Stable for long time use: the black shell of the 12V car relay is made of nylon material which is electrical insulation, the pin is made of brass,....
  • Easy to use: the motor relay is suitable for normal automobile use and simple to operate, you just need to connect the relay with the wire, no other....
  • Specifications information: 30A 12V Relay can be applied to control electrical circuits for components on a vehicle that have a high amperage load,....
  • Extensive usages: the automotive relay is practical and convenient, can be applied to car tail light, engine compartment, electric cooling fans,....
Check Stock