Chunzehui F-1008 Horizontal 9 Port 40A Connector Power Splitter Distributor Source Strip, 1 Input and 8 Output.
Operating voltage: 6 to 20VDC, No-load current: 2.7mA(at 13.8V)..
Input port: maximum input current 40A, fuse 40A. Output port: 8 output ports, fuse 30A * 2, 20A * 2, 10A * 2, 5A * 1, 3A * 1. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40A..
LED over(15.0V) and under(11.5V) voltage indicators, and buzzer audio alarm for over voltage or under voltage. if you do not want to hear the alarm, you can open the aluminum case to remove the BUZZER-OPTION cap. with fault indicator LED for each fuse..
Includes: 9 black power pole housings, 9 red power pole housings, 9 PVC cover flame retardant sleeve, 18 silver plated copper 30A 14-12AWG power pole contacts, 2x tinned copper 45A 12-10AWG power pole contacts..
Overall Dimensions(maximum, w/o cables): L 233mm x W 73.5mm x H 30mm / 9.17"x2.89"x1.18.
Switching Power Supply DWC30WIN, Universal Compact 13.8 Volt DC 110V AC Home Lab AC-DC Converter Power Supply for CB/HAM Radio Mobile, Output Current 30A(Max), 20A(Continuous), Liquid-Crystal Display
DWC30WIN is a high efficiency, compact, lightweight, high performance switching power supply..
Input voltage: 110VAC. Output voltage: 13.8DC adjusted voltage between 9.0 and 15.0 volts. Turn clockwise to increase and counter clockwise to decrease the voltage. When it is set at the center position it will supply 13.8 volts..
Output current: 30A (max), 20A (continuous). Output voltage regulation: less than 2%. Protection: Short-circuit, Automatic current limiting With in 30A..
Ripple: less than 80mVp-p at rated load. Fuse: 5A. Meter: single volt/current meter, back-lit. Make sure the product is always suitably grounded to prevent electric shock and to reduce noise..
Dimensions: 6.1 (W) x 2.7 (H) x 8.1 (D) inch (projections not included). Weight: approx 3.3 lb. Even though the chassis of the unit is negatively grounded, use correct terminals to connect cable..
MICTUNING 12V Fuse Relay Switch Harness Set - 30A ATO ATC Blade Fuse, 5 Pin SPST Automotive Electrical Relays with Heavy Duty 14 AWG Wires - 6 Pack
Upgraded Version - Automotive relays built in fuse socket with included 30A blade fuse, no need of a separate fuse holder, saving space and money. Heavy duty 14AWG wires for main contact.
Easy Wiring - The relay sockets come with color-labeled wires for loads/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87),Green-87a Output Closed Contact.
Neat Mounting Design - The interlocking design of unique male-female slot on each socket edge, easy to connect all relays together, offering clean and neat installationNeat Mounting Design - The interlocking design of unique male-female slot on each socket edge, easy to connect all relays together, offering clean and neat installation.
Good Construction - 12V DC (Max@14V DC) and 30A High Switching Capability. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay. Metal mounting bracket on the electrical relay promotes easy installation.
Wide Application - Wide range of use, greatly used for car lights, fog lamps, wiper, starter, fans, speakers, traction control systems, etc.
HCDC 1 in 8 Out 40Amp Connector Power Splitter Distributor Source Strip Module
Operating voltage: 0 to 32VDC, No-load current: 2mA(for power indicator LED). Input port: maximum input current 40A, fuse 40A. Output port: 8 output....
With power indicator LED. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are....
Enclosure: High quality aluminum enclosure,thickness 1.5mm/0.06"..
Overall Dimensions(maximum, w/o cables): L180mm x W62mm x H33mm / 7.09"x2.44"x1.30". Gross weight: 300g, Net weight: 230g.
Packing list: 1x Distribution module, 9x black power pole housings, 9x red power pole housings, 9x PVC cover flame retardant sleeve, 18x silver plated....
Tip: The max switching current of the contact is 0.5A. Generally, it should be used together with small relay. Excessive current will burn the contact. Cannot directly control AC contactors, solenoid valves, alarms, pumps, and various lights..
What is in the package: 2pcs M16 Water Level Sensor.
150 Watt Halogen Electronic Potted Transformer 120 Volt in-Out / 12 Volt Output Auto Restart Soft Start Short Circuit Protected with Auto Restart
Operating voltage: 0 to 32VDC, No-load current: 2mA(for power indicator LED). Input port: maximum input current 40A, fuse 40A. Output port: 8 output ports, fuse 30A*2, 20A*2, 10A*2, 5A*1, 3A*1..
With power indicator LED. High-quality fuse holder, you can very easy to replace fuse from the outside, ATC/ATO auto fuses are easy to get and are available in 10 values from 1 to 40A..
Enclosure: High quality aluminum enclosure,thickness 1.5mm/0.06"..
Overall Dimensions(maximum, w/o cables): L180mm x W62mm x H33mm / 7.09"x2.44"x1.30". Gross weight: 300g, Net weight: 230g.
Packing list: 1x Distribution module, 9x black power pole housings, 9x red power pole housings, 9x PVC cover flame retardant sleeve, 18x silver plated copper 30A 14-12AWG power pole contacts, 2x tinned copper 45A 12-10AWG power pole contacts..