ReviewsLoading Dock Safety Gear

Rage Powersports ADP-4860-2900 48-Inch x 60-Inch Aluminum Pallet Jack Loading Dock Plates

For loading dock pallet trucks, pallet jacks, carts, and foot traffic material handling.
48" x 60" Loading dock plate with a 9" lip-bend and machine beveled edges.
Includes bolt-on carrying handles and steel lock legs.
Maximum 2,900 lb. capacity over 5" surface height at 14% grade or 7" at 19% grade.
Heavy duty all aluminum construction with a diamond tread surface.

Check Stock

Taylor Made Products 83550 Stow 'N Go Low-Profile Dock Box, 20 x 40 x 19-Inch/Small

DURABLE CONSTRUCTION—The dock box molded fiberglass design holds up in all types of marine environments. The heavy duty stainless steel lockable latch and hinges are corrosive resistant and will keep your gear safe and protected.
EASY ACCESS —Our deck box is a breeze to open and securely close with the built-in gas lift shocks, especially helpful with an armful of gear. These gas shocks, standard in all dock boxes, keeps the lid open even in high wind areas and unstable docks.
KEEP YOUR GEAR SAFE— You don’t have to worry about your gear with the stainless-steel lockable latch, giving you peace of mind that your marine accessories are safely stored on your dock or your boat. The stainless steel hardware is corrosion-resistant.
UNRIVALED QUALITY — Our storage boxes are designed for the marine life and have a smooth UV gel-coat finish on both the exterior and interior. Say goodbye to painful splinters or stray fiberglass pieces while you are grabbing or storing your boating gear.
MADE IN THE USA — Built right here in the USA, boaters know they can trust Taylor Made....

Check Stock

Vestil Rubber Specialty Molded Dock Bumper, T-Shaped, 22\ Length, 22\ Width, 3\ Depth

Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
6" rubber padding for elasticity and resistance to impact.
Fabric-reinforced for strength and dimensional stability.
Steel mounting and tie rods for strength and durability.
Welds to dock or bolts to dock for easy installation.

Check Stock

Vestil V-1120-4.5 Rubber Vertical Laminated Dock Bumper, 11\ Width, 20\ Height, 4.5\ Depth

Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
4-1/2" rubber padding for elasticity and resistance to impact.
Fabric-reinforced for strength and dimensional stability.
Steel mounting and tie rods for strength and durability.
Welds to dock or bolts to dock for easy installation.

Check Stock

TPI Corporation 40-LDA Fostoria Loading Dock Arm – 40\ Reach Dual Square 1-1/2 inch Steel Tubing, 120V, with Two Embedded outlets, Safety Yellow

40" Reach Dual Square 1-1/2 inch Steel Tubing allows for fastening optional dock fan head or light head (sold separately). Outer arm includes two embedded outlets and rotates 210-degress horizontally.
rated for 120-Volt electrical operation..
Chip resistant safety yellow & black powder coated ﬁnish for high visibility and durability. Rugged steel wall plate 3x5x3/16 mounting plate rotates 180-degs and allows for fastening (4) 3/8" bolts (not supplied) to a vertical or structural surface..
5-foot long SJT 18/3 grounded 3-prong cord, 120V, 1PH.
exits the back of the arm for convenient plug-in electrical connection.
shipped fully-assembled - ready for plug & play operation..
ETL Listed for USA/Canada. Long lasting construction is made in the USA with heavy 11-gauge steel tubing designed for harsh environments..
Where Used: Engineered for variety of applications to solve hard to cool or illuminate areas such as loading dock trailers, back dock areas, conveyor systems, personal workstations, shops, garages, processing, commercial handling or industrial areas..

Check Stock

TPI Corporation 60-LDA Fostoria Loading Dock Arm – 40\ Reach Dual Square 1-1/2 inch Steel Tubing, 120V, with two embedded outlets, safety yellow

60" Reach Dual Square 1-1/2 inch Steel Tubing allows for fastening optional dock fan head or light head (sold separately). Outer arm includes two embedded outlets and rotates 210-degress horizontally.
rated for 120-Volt electrical operation..
Chip resistant safety yellow & black powder coated ﬁnish for high visibility and durability. Rugged steel wall plate 3x5x3/16 mounting plate rotates 180-degs and allows for fastening (4) 3/8" bolts (not supplied) to a vertical or structural surface..
5-foot long SJT 18/3 grounded 3-prong cord, 120V, 1PH.
exits the back of the arm for convenient plug-in electrical connection.
shipped fully-assembled - ready for plug & play operation..
ETL Listed for USA/Canada. Long lasting construction is made in the USA with heavy 11-gauge steel tubing designed for harsh environments..
Where Used: Engineered for variety of applications to solve hard to cool or illuminate areas such as loading dock trailers, back dock areas, conveyor systems, personal workstations, shops, garages, processing, commercial handling or industrial areas..

Check Stock

Taylor Made Products 83561 Stow 'N Go Triangle Dock Box (27.5" x 54", Triangle ) , White

DURABLE CONSTRUCTION—The dock box molded fiberglass design holds up in all types of marine environments. The heavy duty stainless steel lockable latch and hinges are corrosive resistant and will keep your gear safe and protected.
EASY ACCESS —Our deck box is a breeze to open and securely close with the built-in gas lift shocks, especially helpful with an armful of gear. These gas shocks, standard in all dock boxes, keeps the lid open even in high wind areas and unstable docks.
STORE YOUR GEAR— Our triangle dock box measures 27” H x 54” W x 33 D” with plenty of room to store your boating accessories. Boaters like the shape of our boxes and that they are a perfect fit for the gussets on docks.
UNRIVALED QUALITY — Our storage boxes are designed for the marine life and have a smooth UV gel-coat finish on both the exterior and interior. Say goodbye to painful splinters or stray fiberglass pieces while you are grabbing or storing your boating gear.
MADE IN THE USA — Built right here in the USA, boaters know they can trust Taylor Made dock boxes to store their mari....

Check Stock

Genuine Samsung Qi Wireless Charging Dock Cradle Charger For Gear S3 Classic,Frontier SM-R760 with 3FT Micro USB & Stylus (New)

Brand New Original Samsung Gear S3 Wireless Charging Cradle Dock with 5FT Micro USB and MKK Exclusive Stylus.
Compatible Model: Galaxy Gear S3 Classic,Galaxy Gear S3 Frontier,SM-R770,SM-R760, SM-R765.
100% Genuine OEM Samsung Charging Dock Non Retail Packing.
input:5.0V=,0.7A (Without Smart Watch Gear S3) Just Charging Cradle Dock with 5FT Micro USB and MKK Exclusive Stylus.

Check Stock

Nite Ize GLK24-31-R3 Gear Tie Dockable, 24-Inch, Blaze Orange

Simply mount the Dock to any wall stud or other desired location with the included (2) #8 x 2" screws to create a docking location.
Use the integrated end loop to secure the Gear Tie around nearly any item by cinching or twisting, then slide it over and into the Dock.
Use multiple Docks to create a complete wall system for your garage or workspace.
Gear Tie can stay on your object to create added utility and convenience.

Check Stock

Vestil 1224-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 12\ Height, 24\ Width, 4.5\ Depth

Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
4-1/2" rubber padding for elasticity and resistance to impact.
Fabric-reinforced for strength and dimensional stability.
Steel mounting and tie rods for strength and durability.
Welds to dock or bolts to dock for easy installation.

Check Stock

Vestil 1236-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 12\ Height, 36\ Width, 4.5\ Depth

Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
4-1/2" rubber padding for elasticity and resistance to impact.
Fabric-reinforced for strength and dimensional stability.
Steel mounting and tie rods for strength and durability.
Welds to dock or bolts to dock for easy installation.

Check Stock